292-J-P-HP-ST-CM2 Equivalent & Substitute Parts

Part Overview

The Samtec 292-J-P-HP-ST-CM2 is a 2.92mm coaxial connector jack with female socket configuration, rated for 50 ohms impedance and surface mount compression termination. This connector is designed for RF applications requiring frequencies up to 40 GHz. The part is currently active in production with 940 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 2.92mm female jack connectors with identical electrical and mechanical specifications.

Substiute Parts

292-J-P-HP-ST-CM2

Samtec Inc.In Stock: 1035292-J-P-HP-ST-CM2 Datasheet

Current PartRFQ

1521-60187

Amphenol SV MicrowaveIn Stock: 8411521-60187 Datasheet

Parametric EquivalentRFQ

1521-60188

Amphenol SV MicrowaveIn Stock: 8811521-60188 Datasheet

Parametric EquivalentRFQ

1521-60193

Amphenol SV MicrowaveIn Stock: 11701521-60193 Datasheet

Parametric EquivalentRFQ

1521-60194

Amphenol SV MicrowaveIn Stock: 10811521-60194 Datasheet

Parametric EquivalentRFQ

SF1521-60013

Amphenol SV MicrowaveIn Stock: 874SF1521-60013 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 292-J-P-HP-ST-CM2 are qualified based on strict electrical and mechanical parameter matching. All identified substitutes maintain the following critical parameters:

• Connector style: 2.92mm
• Connector type: Jack, Female Socket
• Impedance: 50 Ohms
• Contact termination: Compression
• Shield termination: Screw
• Mounting type: Surface Mount
• Mounting feature: Flange
• Fastening type: Threaded
• Frequency maximum: 40 GHz
• Number of ports: 1
• Center contact material: Beryllium Copper
• Center contact plating: Gold
• Body material: Stainless Steel
• Housing color: Silver
• RoHS3 compliance: Yes
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts are sourced from Amphenol SV Microwave and are classified as parametric equivalents. All substitutes are active products with confirmed inventory availability.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are active products with confirmed ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Selection among the substitute options is based on inventory availability and dielectric material consideration.

The primary distinction between the main part (292-J-P-HP-ST-CM2) and all Amphenol substitutes is the dielectric material composition. The Samtec part uses Polychlorotrifluoroethylene (PCTFE), while all Amphenol substitutes use Polyetherimide (PEI). Both materials are suitable for RF applications at 40 GHz and maintain 50 ohm impedance characteristics.

Amphenol substitutes 1521-60187, 1521-60188, 1521-60193, and 1521-60194 provide documented operating temperature range (-65°C to 165°C) and mating cycle rating (500 cycles), specifications not provided for the main part. The SF1521-60013 variant offers equivalent electrical and mechanical performance with the same mating cycle rating.

All substitute parts carry EAR99 ECCN classification and HTSUS code 8536.69.4010, consistent with the main part. Amphenol substitutes 1521-60187, 1521-60188, and 1521-60193 are REACH Affected; 1521-60194 status not specified; SF1521-60013 is REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can Amphenol 1521-60187, 1521-60188, 1521-60193, or 1521-60194 be used as direct replacements for the Samtec 292-J-P-HP-ST-CM2?

A: Yes. All four Amphenol parts are parametric equivalents matching the critical electrical and mechanical specifications: 2.92mm connector style, female jack socket, 50 ohm impedance, compression contact termination, screw shield termination, surface mount flange mounting, and 40 GHz frequency rating. All are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between the Samtec dielectric material (PCTFE) and the Amphenol dielectric material (PEI)?

A: The main part uses Polychlorotrifluoroethylene (PCTFE) while all Amphenol substitutes use Polyetherimide (PEI). Both materials are suitable for RF coaxial connector applications at 40 GHz. The dielectric material does not affect the 50 ohm impedance or connector interface compatibility.

Q: Are the Amphenol substitutes field replaceable?

A: Yes. The Amphenol parts 1521-60187, 1521-60188, 1521-60193, and 1521-60194 are designated as field replaceable components. All substitutes maintain identical connector geometry, mounting configuration, and electrical performance.

Q: What is the difference between SF1521-60013 and the other Amphenol substitutes?

A: SF1521-60013 is functionally equivalent to the other Amphenol substitutes with identical electrical and mechanical specifications. The primary difference is the base product number designation (SF1521 versus 1521-60). Operating temperature range is not specified for SF1521-60013, whereas the other Amphenol substitutes specify -65°C to 165°C.

Q: Which substitute part has the highest inventory availability?

A: Amphenol 1521-60193 has the highest inventory with 1146 units in stock, followed by 1521-60194 with 996 units, 1521-60188 with 809 units, SF1521-60013 with 769 units, and 1521-60187 with 742 units.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts (1521-60187, 1521-60188, 1521-60193, 1521-60194, and SF1521-60013) are ROHS3 compliant, matching the compliance status of the main part.

Q: What is the mating cycle rating for these connectors?

A: The Amphenol substitutes specify 500 mating cycles. The main Samtec part does not provide a mating cycle specification in the available data.

Q: Can these connectors be used interchangeably in the same PCB footprint?

A: Yes. All parts share identical mounting specifications: surface mount configuration with flange mounting feature, threaded fastening type, and single port design. PCB footprints designed for the 292-J-P-HP-ST-CM2 accommodate all identified substitutes.