TE Connectivity AMP Connectors 292323-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 292323-2 is a stacked USB 2.0 Type-A receptacle connector designed for through-hole, right-angle mounting applications. This connector features 8 positions, dual ports, and is rated for 1A per contact at 30VAC. The part maintains active product status and is RoHS compliant with UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical specifications, mechanical mounting characteristics, and connector topology align with the original component's functional requirements.

Substiute Parts

292323-2

TE Connectivity AMP ConnectorsIn Stock: 943292323-2 Datasheet

Current PartRFQ

614008246521

Würth ElektronikIn Stock: 1060614008246521 Datasheet

Parametric EquivalentRFQ

61400826021

Würth ElektronikIn Stock: 220261400826021 Datasheet

Parametric EquivalentRFQ

896-43-008-90-000000

Mill-Max Manufacturing Corp.In Stock: 7527896-43-008-90-000000 Datasheet

Parametric EquivalentRFQ

SS-52100-003

Stewart ConnectorIn Stock: 14033SS-52100-003 Datasheet

Parametric EquivalentRFQ

UJ2-ADH-W1-TH

CUI DevicesIn Stock: 1549UJ2-ADH-W1-TH Datasheet

Parametric EquivalentRFQ

USB-A-D-RA

Adam TechIn Stock: 4014USB-A-D-RA Datasheet

Parametric EquivalentRFQ

USB1035-GF-P-0-B-B

GCTIn Stock: 2217USB1035-GF-P-0-B-B Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 292323-2 are qualified based on strict parametric equivalence across the following critical criteria:

Mandatory Matching Parameters:

• Connector Type: USB-A (USB TYPE-A), Stacked
• Number of Contacts: 8
• Gender: Receptacle
• Specifications: USB 2.0
• Mounting Type: Through Hole, Right Angle
• Mounting Feature: Horizontal
• Termination: Solder
• Number of Ports: 2
• Shielding: Shielded
• Material Flammability Rating: UL94 V-0

Allowable Parameter Variations: Substitute parts may differ in operating temperature range, current rating (when equal to or exceeding 1A), shell/shielding material composition, contact finish type, and manufacturer identity, provided all mandatory parameters remain identical. Voltage rating, mating cycles, and compliance certifications must meet or exceed the original specification.

All identified substitutes maintain active product status, RoHS3 compliance, and REACH unaffected status, ensuring regulatory alignment with the original component.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status and meet or exceed the regulatory and compliance requirements of the original TE Connectivity 292323-2 component. Selection among substitutes should be based on the following engineering considerations:

Würth Elektronik 614008246521: This substitute provides enhanced current rating (1.5A) and extended operating temperature range (-40°C to 105°C). However, this part features a single port configuration, which differs from the dual-port requirement of the original specification. This part is not suitable for direct substitution.

Würth Elektronik 61400826021: This substitute maintains dual-port configuration with enhanced current rating (1.5A) and extended operating temperature range (-40°C to 105°C). Brass shell material and ROHS3 compliance align with regulatory requirements. This part qualifies as a direct substitute.

Mill-Max Manufacturing 896-43-008-90-000000: This substitute maintains all critical parameters with stainless steel shell material and ROHS3 compliance. Current rating matches the original specification at 1A. This part qualifies as a direct substitute.

Stewart Connector SS-52100-003: This substitute maintains dual-port configuration and copper alloy shell material matching the original. However, current rating, voltage rating, and mating cycle specifications are not provided. Incomplete specification data limits engineering confidence for direct substitution.

CUI Devices UJ2-ADH-W1-TH: This substitute maintains all critical parameters with brass shell material, 1A current rating, and ROHS3 compliance. Operating temperature range (-20°C to 85°C) is narrower than the original but remains within acceptable bounds for most applications. This part qualifies as a direct substitute.

Adam Tech USB-A-D-RA: This substitute maintains all critical parameters with 1A current rating and ROHS3 compliance. Operating temperature range (-20°C to 60°C) is narrower than the original specification. Mating cycle specification is not provided. This part qualifies as a direct substitute with temperature limitations.

GCT USB1035-GF-P-0-B-B: This substitute provides enhanced current rating (1.5A) and extended operating temperature range (-40°C to 85°C). Steel shell material and ROHS3 compliance align with regulatory requirements. This part qualifies as a direct substitute.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the TE Connectivity 292323-2?

A: A valid substitute must maintain identical connector type (USB-A stacked receptacle), contact count (8 positions), gender (receptacle), USB 2.0 specification, through-hole right-angle mounting, horizontal mounting feature, solder termination, dual-port configuration, shielded design, and UL94 V-0 flammability rating. Current rating must equal or exceed 1A, voltage rating must equal or exceed 30V, and mating cycles must equal or exceed 1500 cycles.

Q: Can I use Würth Elektronik 614008246521 as a direct replacement?

A: No. While this part meets most electrical and mechanical parameters, it features a single-port configuration instead of the required dual-port design. This fundamental difference in port count makes it unsuitable for direct substitution.

Q: What is the significance of the operating temperature range differences among substitutes?

A: Operating temperature range defines the environmental conditions under which the connector maintains specified electrical and mechanical performance. The original TE Connectivity part operates from -55°C to 85°C. Substitutes with narrower ranges (such as -20°C to 60°C) are suitable only for applications within their specified temperature envelope. Extended range substitutes (such as -40°C to 105°C) provide greater operational flexibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. All identified substitutes carry ROHS3 compliance certification, meeting or exceeding the RoHS compliance status of the original TE Connectivity 292323-2 component.

Q: What is the difference between shell materials (copper alloy, brass, steel) in these connectors?

A: Shell and shielding materials affect electromagnetic shielding effectiveness, corrosion resistance, and mechanical durability. Copper alloy and brass provide superior electromagnetic shielding and corrosion resistance. Stainless steel and standard steel provide robust mechanical properties. Material selection should align with application-specific environmental and performance requirements.

Q: Why do some substitutes have higher current ratings than the original?

A: Higher current ratings indicate enhanced contact design and material composition that support greater current flow without exceeding temperature limits. A substitute with 1.5A rating can safely handle the original 1A requirement with additional margin. This does not affect compatibility; it represents improved performance capability.

Q: Is the Stewart Connector SS-52100-003 a suitable substitute despite incomplete specifications?

A: The Stewart Connector SS-52100-003 maintains all critical mechanical and electrical topology parameters. However, missing current rating, voltage rating, and mating cycle specifications create uncertainty regarding full compliance with the original design envelope. Engineering judgment should weigh this incomplete data against application requirements before selection.

Q: What does "Moisture Sensitivity Level (MSL)" mean, and why does CUI Devices UJ2-ADH-W1-TH show "Not Applicable"?

A: MSL indicates the maximum time a component can be exposed to ambient moisture before soldering without degradation. MSL 1 (Unlimited) means the component has no moisture sensitivity restrictions. CUI Devices marking this as "Not Applicable" suggests the component does not require moisture control measures, which is equivalent to MSL 1 for practical purposes.

Q: Can I substitute based on packaging type alone?

A: No. Packaging type (tray, tube, reel) affects handling, storage, and assembly logistics but does not determine electrical or mechanical compatibility. Substitution decisions must be based on connector specifications, not packaging format.