PSR-PIP-24DC/MXF3/4X1/2X2/B Equivalent & Substitute Parts

Part Overview

The PSR-PIP-24DC/MXF3/4X1/2X2/B is a 24VDC relay manufactured by Phoenix Contact, configured as a 4PST-NO (4 Form A) switching device with 6A contact rating. This component is classified as obsolete, making identification of functionally compatible alternatives essential for ongoing system maintenance and new design implementations where equivalent performance is required.

Substiute Parts

2903259

Phoenix ContactIn Stock: 7472903259 Datasheet

Current PartRFQ

1104972

Phoenix ContactIn Stock: 7541104972 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution analysis for the PSR-PIP-24DC/MXF3/4X1/2X2/B is based on the following critical parameters:

• Coil voltage compatibility (24VDC)
• Mounting configuration (DIN Rail)
• Termination method (Spring Terminal)
• Manufacturer ecosystem (Phoenix Contact)
• Contact form and switching capability
• Environmental compliance (RoHS status)

The identified substitute part 1104972 shares the core operational voltage, mounting standard, and termination style. However, significant differences exist in contact configuration and current rating that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The PSR-PIP-24DC/MXF3/4X1/2X2/B is an obsolete component, necessitating alternative sourcing for new applications or system replacements.

Part 1104972 is an active Phoenix Contact product within the PSR series, maintaining compatibility in core infrastructure parameters: 24VDC coil voltage, DIN Rail mounting, and Spring Terminal termination. Both components feature integrated diodes and lighted indicators, supporting equivalent control circuit integration.

Critical differences require application-level evaluation:

• Contact configuration: The main part provides 4PST-NO switching; the substitute provides 3PST-NO switching
• Current capacity: The main part supports 6A; the substitute supports 1.6A
• Switching voltage range: The main part operates up to 250VAC/250VDC; the substitute operates at 24VDC nominal

Selection of part 1104972 is appropriate for applications requiring three independent normally-open switching paths at 24VDC with maximum 1.6A per contact. Applications requiring four switching paths or higher current capacity require alternative evaluation.

Both components maintain current RoHS compliance status, supporting regulatory requirements for new designs and replacements.

Frequently Asked Questions (FAQ)

Q: Can part 1104972 directly replace the PSR-PIP-24DC/MXF3/4X1/2X2/B in all applications?

A: No. While both components share 24VDC coil voltage, DIN Rail mounting, and Spring Terminal termination, the substitute provides 3PST-NO contact configuration versus the original 4PST-NO. Applications requiring four independent switching paths cannot use this substitute without circuit redesign.

Q: What is the primary limitation of part 1104972 as a substitute?

A: The contact current rating of 1.6A is significantly lower than the original part's 6A rating. Applications switching loads exceeding 1.6A per contact require alternative components.

Q: Are both components RoHS compliant?

A: Yes. The original part is RoHS Compliant; the substitute is ROHS3 Compliant. Both meet current environmental regulatory requirements.

Q: Do both components support the same switching voltage range?

A: No. The original part supports switching voltages up to 250VAC and 250VDC. The substitute operates at 24VDC nominal. Applications requiring higher switching voltages cannot use the substitute.

Q: What is the packaging difference between these components?

A: The original part uses standard packaging; the substitute is supplied in Box packaging. Both are DIN Rail mounted with Spring Terminal termination.

Q: Can the substitute handle the same operating temperature range?

A: No. The original part operates from -20°C to 45°C; the substitute operates from -10°C to 55°C. Applications requiring operation below -10°C cannot use the substitute.