Equivalent & Substitute Parts for 28S2011-000

Part Overview

The 28S2011-000 is a clip-together chassis mount ferrite core manufactured by Laird-Signal Integrity Products. This component provides 280 ohm impedance at 100 MHz and is designed for electromagnetic interference (EMI) suppression applications. The part operates as a flat-type ferrite core assembly, requiring two units to form one complete assembly. Product status is Active, ensuring continued availability and support. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

28S2011-000

Laird-Signal Integrity ProductsIn Stock: 124128S2011-000 Datasheet

Current PartRFQ

28S2011-0P0

Laird-Signal Integrity ProductsIn Stock: 891728S2011-0P0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 28S2011-000 is determined by strict equivalence across the following critical parameters:

• Impedance @ Frequency: 280 Ohm @ 100 MHz (exact match required)
• Type: Flat (exact match required)
• Design: Clip Together assembly configuration (exact match required)
• Mounting Type: Chassis Mount (exact match required)
• Inner Dimension: 2.570" W x 0.033" H / 65.28 mm x 0.84 mm (exact match required)
• Outer Dimension: 3.000" W x 0.250" H / 76.20 mm x 6.35 mm (exact match required)
• Length: 1.125" / 28.58 mm (exact match required)
• Material: 28 (exact match required)
• RoHS Status: ROHS3 Compliant (compliance requirement)

The substitute part 28S2011-0P0 meets all electrical and mechanical parameters specified above, establishing direct equivalence with the main part number.

Parameter Comparison

Engineering Selection Recommendations

Both 28S2011-000 and 28S2011-0P0 are Active status products from Laird-Signal Integrity Products, ensuring ongoing manufacturer support and availability. Both parts are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements. The parts are classified under ECCN EAR99 and HTSUS 8547.10.8000, indicating identical export and tariff classifications.

Selection between these parts may be based on inventory availability and lead time requirements. The 28S2011-0P0 currently maintains higher inventory levels (8897 pcs) compared to 28S2011-000 (1134 pcs), which may influence procurement decisions for high-volume applications or time-sensitive projects.

Frequently Asked Questions (FAQ)

Q: Are 28S2011-000 and 28S2011-0P0 electrically identical?

A: Yes. Both parts provide 280 ohm impedance at 100 MHz and are constructed from the same material (28). They are direct electrical equivalents.

Q: Can these parts be used interchangeably in circuit designs?

A: Yes. The parts are mechanically and electrically identical across all specified parameters, including inner dimensions (2.570" W x 0.033" H), outer dimensions (3.000" W x 0.250" H), and length (1.125"). They mount identically as chassis mount components.

Q: What does "Clip Together (Order Qty 2=1 Assembly)" mean?

A: This design requires two individual ferrite core units to form one complete assembly. When ordering, specify quantities in multiples of 2 to obtain complete assemblies.

Q: Are both parts compliant with current environmental standards?

A: Yes. Both 28S2011-000 and 28S2011-0P0 are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations.

Q: Which part should I select based on availability?

A: Selection should be based on project requirements and lead time. The 28S2011-0P0 has higher current inventory (8897 pcs) versus 28S2011-000 (1134 pcs). Consult your supplier for current stock status and delivery schedules.

Q: Do these parts require any special handling or storage?

A: Moisture Sensitivity Level (MSL) is Not Applicable for both parts, indicating standard handling and storage conditions are acceptable.