TE Connectivity AMP Connectors 2-87215-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-87215-6 is a rectangular connector header designed for through-hole mounting applications. This connector features 52 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnections. The part is currently active in production status with 1103 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component selection flexibility for procurement, inventory management, or design revision purposes.

Substiute Parts

2-87215-6

TE Connectivity AMP ConnectorsIn Stock: 11242-87215-6 Datasheet

Current PartRFQ

PEC26DFDN

Sullins Connector SolutionsIn Stock: 1100PEC26DFDN Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for rectangular connector headers is determined by alignment of critical electrical and mechanical parameters. The following parameters establish substitution validity:

Primary Matching Criteria:

• Connector Type: Header (with or without breakaway feature)
• Contact Type: Male Pin
• Number of Positions: 52
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Current Rating: 3A
• Material Flammability Rating: UL94 V-0

Secondary Compatibility Factors:

• Operating Temperature Range (minimum -65°C, maximum ≥105°C)
• Contact Material: Phosphor Bronze
• Insulation Material: Thermoplastic or equivalent
• RoHS Compliance Status

The substitute part PEC26DFDN from Sullins Connector Solutions meets all primary matching criteria and maintains compatibility across secondary factors, with noted variations in contact geometry and finish specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: TE Connectivity 2-87215-6

The TE Connectivity AMP Connectors 2-87215-6 is the recommended primary selection. This part maintains active production status, ensuring long-term availability and supply chain stability. The connector is RoHS Compliant and carries UL94 V-0 flammability certification. Gold-plated contacts provide superior corrosion resistance and contact reliability. The part is suitable for applications requiring standard 2.54mm pitch header configurations with 52-position capacity.

Substitute Selection: Sullins PEC26DFDN

The Sullins Connector Solutions PEC26DFDN serves as a functional substitute when the TE Connectivity part is unavailable. This part meets all primary electrical and mechanical matching criteria and provides ROHS3 compliance. The substitute features an extended operating temperature range (-65°C ~ 125°C), offering thermal performance advantage in high-temperature applications. However, the following design differences require evaluation:

• Contact post length is 0.295" (7.49mm) longer, resulting in increased overall connector height
• Contact geometry transitions from circular to square profile
• Contact finish changes from gold to tin plating
• Insulation height increases by 0.010" (0.25mm)

These dimensional and material variations necessitate verification of PCB layout compatibility, mating connector clearances, and contact retention characteristics before substitution in existing designs. The part is currently discontinued at DiGi Electronics, limiting future procurement options.

Compliance Status:

Both parts satisfy UL94 V-0 flammability requirements and maintain RoHS compliance. The TE Connectivity part is RoHS Compliant (standard revision), while the Sullins part specifies ROHS3 Compliant status. Both parts carry EAR99 ECCN classification and share identical HTSUS code 8536.69.4040.

Frequently Asked Questions (FAQ)

Q: Can the Sullins PEC26DFDN directly replace the TE Connectivity 2-87215-6 in existing designs?

A: Direct replacement requires design verification. While both connectors share identical pitch (0.100"), position count (52), and row configuration (2 rows), the Sullins part has a longer contact post (0.420" vs. 0.125") and increased overall height (0.838" vs. 0.533"). PCB layout, mating connector clearances, and mechanical mounting must be evaluated to confirm compatibility.

Q: What are the key electrical differences between these two connectors?

A: Both connectors carry identical current ratings (3A) and operate within overlapping temperature ranges. The TE Connectivity part operates from -65°C to 105°C, while the Sullins substitute extends to 125°C maximum. Contact material (Phosphor Bronze) is identical in both parts. The primary electrical difference is contact finish: gold plating on the TE part versus tin plating on the Sullins part. Gold provides superior corrosion resistance; tin offers cost reduction.

Q: Are there mechanical compatibility issues with the contact geometry difference?

A: Yes. The TE Connectivity part features circular contact pins, while the Sullins part uses square contact geometry. This difference affects contact retention in mating connectors and may influence insertion force characteristics. Mating connector compatibility must be confirmed before substitution.

Q: What is the significance of the insulation material difference?

A: The TE Connectivity part uses generic thermoplastic insulation, while the Sullins part specifies Polybutylene Terephthalate (PBT). PBT is a high-performance engineering thermoplastic offering superior dimensional stability, chemical resistance, and thermal performance. This represents a material upgrade in the substitute part.

Q: Why is the Sullins part discontinued at DiGi Electronics?

A: Discontinuation at DiGi Electronics indicates the distributor has ceased stocking this part. This does not necessarily reflect manufacturer discontinuation but rather distributor inventory decisions. Availability through alternative distributors should be confirmed before committing to this substitute for new designs.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 2-87215-6 is RoHS Compliant (standard revision). The Sullins PEC26DFDN is ROHS3 Compliant, which represents the current RoHS Directive revision. Both parts meet RoHS requirements and are suitable for applications subject to RoHS regulations.

Q: What is the impact of the contact finish difference on reliability?

A: Gold plating (TE Connectivity part) provides superior protection against oxidation and corrosion, particularly in humid or corrosive environments. Tin plating (Sullins part) is more susceptible to oxidation but offers cost advantages. For applications with stringent reliability requirements or extended storage periods, gold-plated contacts are preferred.

Q: Can I use the Sullins part in a new design if the TE Connectivity part becomes unavailable?

A: The Sullins part can be used in new designs provided all dimensional differences are accommodated in PCB layout and mechanical design. The extended operating temperature range may provide design benefits. However, the discontinued status at DiGi Electronics suggests limited long-term availability. Confirm alternative distribution channels and establish secondary sourcing before committing to this part for production designs.