Phoenix Contact 2867034 - 900 MHz Transmission System Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 2867034 is a 900 MHz RF Transmitter and Receiver Set designed for general-purpose wireless applications operating in the 902–928 MHz frequency band. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, redesign, and procurement planning. Substitute parts must maintain compatibility with the 900 MHz ISM band while supporting equivalent transmission and reception capabilities.

Substiute Parts

2867034

Phoenix ContactIn Stock: 10642867034 Datasheet

Current PartRFQ

2702877

Phoenix ContactIn Stock: 10082702877 Datasheet

SimilarRFQ

2901540

Phoenix ContactIn Stock: 10452901540 Datasheet

SimilarRFQ

2904801

Phoenix ContactIn Stock: 8272904801 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the Phoenix Contact 2867034 is based on the following critical parameters:

• Frequency Compatibility: All substitute parts must operate within or encompass the 900 MHz ISM band (902–928 MHz or 900 MHz center frequency)
• Functional Equivalence: Substitute parts must provide RF transmission and reception capabilities, either as integrated transceivers or as complementary RF modules
• Regulatory Compliance: All substitutes must maintain RoHS3 compliance and appropriate ECCN classification for export control purposes
• Packaging and Interface: Substitutes are grouped by form factor and connectivity (transceiver modules, modems, or antenna components)

The substitute parts identified fall into two functional categories: active RF transceiver modules (2702877, 2901540) and supporting RF antenna components (2904801). These parts share the 900 MHz frequency specification and Phoenix Contact manufacturing origin, ensuring design continuity and supply chain consistency.

Parameter Comparison

Engineering Selection Recommendations

For RF Transceiver Replacement:

• Phoenix Contact 2702877 (RADIOLINE 900 MHz Transceiver): Active product status with ROHS3 compliance. Provides 1 W output power and −95 dBm sensitivity. Suitable for applications requiring standard transceiver functionality with 500 kbps data rate capability. Supply voltage range 10.8–30.5 V accommodates industrial power specifications.

• Phoenix Contact 2901540 (900 MHz RADIOLINE Radio Module): Active product status with ROHS3 compliance and FHSS modulation support. Offers enhanced receiver sensitivity (−112 dBm) and integrated modem functionality with RS-232 and RS-485 serial interfaces. Recommended for applications requiring protocol-level integration and frequency-hopping spread spectrum operation.

For Antenna Integration:

• Phoenix Contact 2904801 (900 MHz ISM Whip Antenna): Active product status with ROHS3 compliance. Provides 2.15 dBi gain with RP-SMA Male termination and 1.8 m cable assembly. IP65 ingress protection and bracket mounting support industrial deployment. ECCN classification EAR99 indicates unrestricted export status.

All substitute parts maintain Phoenix Contact manufacturing origin and 900 MHz frequency band alignment, ensuring design continuity and regulatory compliance with the original 2867034 specification.

Frequently Asked Questions (FAQ)

Q: Can the 2702877 directly replace the 2867034 in existing designs?

A: The 2702877 provides equivalent 900 MHz transceiver functionality with active product status. However, the original 2867034 specifications for voltage supply, output power, and sensitivity are not documented. Verification of electrical interface compatibility and mechanical form factor is required before substitution.

Q: What is the difference between the 2702877 and 2901540 transceivers?

A: The 2702877 is a basic transceiver with 1 W output and −95 dBm sensitivity. The 2901540 integrates modem functionality with RS-232 and RS-485 interfaces, FHSS modulation support, and superior receiver sensitivity (−112 dBm). Selection depends on whether serial protocol integration and frequency-hopping capability are required.

Q: Is the 2904801 antenna compatible with the transceiver modules?

A: The 2904801 is a 900 MHz ISM whip antenna with RP-SMA Male termination. Compatibility depends on the RF connector type of the selected transceiver module. Mechanical mounting and cable routing must be evaluated for the specific application.

Q: What are the export control implications of these substitutes?

A: The 2867034 carries ECCN 5A002A1 classification. Substitutes 2702877 and 2901540 carry ECCN 5A992C, while the 2904801 antenna carries EAR99 (unrestricted). Verify export control requirements for your jurisdiction and end-use application.

Q: Are all substitute parts RoHS compliant?

A: Yes. The 2867034 is RoHS Compliant. All substitute parts (2702877, 2901540, 2904801) are ROHS3 Compliant, meeting current environmental and hazardous substance restrictions.

Q: What packaging formats are available for these substitutes?

A: The 2702877, 2901540, and 2904801 are supplied in Bulk packaging. Verify minimum order quantities and lead times with your supplier for procurement planning.