TE Connectivity AMP 2-84984-2 FFC/FPC Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP 2-84984-2 is a 22-position flat flexible connector (FFC/FPC) designed for vertical mounting through-hole applications with 1.00mm pitch spacing. This connector features kinked pin termination and is rated for 125V at 1A continuous current, with an operating temperature range of -20°C to 85°C.

The 2-84984-2 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and repair requirements for legacy systems utilizing this connector type.

Substiute Parts

2-84984-2

TE Connectivity AMP ConnectorsIn Stock: 10322-84984-2 Datasheet

Current PartRFQ

0528062210

MolexIn Stock: 65540528062210 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity AMP 2-84984-2 is evaluated based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Number of positions: 22
• Pitch spacing: 0.039" (1.00mm)
• Mounting type: Through hole
• Contact configuration: Vertical - 1 sided
• Termination style: Kinked pin
• FFC/FPC thickness: 0.30mm
• Contact material: Phosphor bronze
• Contact finish: Tin

Allowable Variation Parameters:

• Height above board: Minor variations acceptable within mechanical envelope constraints
• Housing material: Alternative materials acceptable if electrical and mechanical performance maintained
• Voltage rating: Substitute must meet or exceed original specification
• Current rating: Substitute must meet or exceed original specification
• Operating temperature range: Substitute must encompass or exceed original range

The Molex 0528062210 connector satisfies the critical matching parameters for position count, pitch, mounting type, contact configuration, termination style, and material specifications. However, specific electrical rating differences exist and are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Primary Consideration: Electrical Rating Derating

The Molex 0528062210 substitute connector operates at reduced electrical ratings compared to the TE Connectivity AMP 2-84984-2. The substitute is rated for 50V maximum (versus 125V) and 0.5A maximum (versus 1A). Selection of this substitute requires confirmation that the application circuit operates within these reduced electrical parameters.

Secondary Consideration: Product Status and Supply

The TE Connectivity AMP 2-84984-2 is classified as obsolete, indicating discontinued manufacturing and limited future availability. The Molex 0528062210 maintains active product status with current manufacturing support, ensuring long-term supply chain reliability and technical support availability.

Tertiary Consideration: Compliance and Environmental Standards

The Molex 0528062210 is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements. The original TE Connectivity part carries "Not applicable" RoHS status, reflecting its obsolete classification prior to current regulatory frameworks.

Mechanical Compatibility

The 0.007" (0.19mm) difference in height above board between the two connectors falls within standard PCB layout tolerances and does not present mechanical interference concerns for typical through-hole mounting applications. Both connectors maintain identical pitch, position count, and contact configuration, ensuring mechanical interchangeability at the PCB interface.

Temperature Operating Range

The Molex substitute operates to 80°C maximum, compared to 85°C for the original part. This 5°C reduction is acceptable for applications with maximum operating temperatures at or below 80°C. Applications requiring operation above 80°C require alternative substitutes or retention of original TE Connectivity inventory.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0528062210 be used as a direct replacement for the TE Connectivity AMP 2-84984-2?

A: Mechanical and contact configuration compatibility is confirmed. However, electrical rating derating must be evaluated. The substitute is rated for 50V and 0.5A, compared to the original 125V and 1A ratings. Direct replacement is permissible only when application voltage does not exceed 50V and application current does not exceed 0.5A.

Q: What is the significance of the height above board difference?

A: The Molex 0528062210 is 0.007" (0.19mm) lower than the original TE Connectivity connector. This difference is negligible for standard PCB layout and does not affect mechanical clearance or electrical performance in typical applications. No PCB redesign is required.

Q: Are there compatibility issues with the different housing materials?

A: The original uses glass-filled PBT; the substitute uses PPS. Both are thermoplastic engineering polymers with similar electrical insulation properties and thermal stability. Material substitution does not affect electrical performance or mechanical reliability for standard FFC/FPC connector applications.

Q: What does the "Active" product status of the Molex part mean?

A: Active status indicates the Molex 0528062210 is currently manufactured and supported by the vendor. This ensures availability for new orders, technical documentation access, and long-term supply chain continuity, contrasting with the obsolete status of the original TE Connectivity part.

Q: Is the 5°C reduction in maximum operating temperature significant?

A: The reduction from 85°C to 80°C is acceptable for applications with maximum operating temperatures at or below 80°C. Applications requiring sustained operation above 80°C require alternative substitutes or continued use of original TE Connectivity inventory if available.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. Both the original and substitute connectors carry this rating, eliminating moisture sensitivity as a substitution concern.

Q: Are there any compliance or regulatory differences between the two connectors?

A: The Molex 0528062210 is ROHS3 compliant and REACH unaffected, meeting current environmental regulations. The original TE Connectivity part predates these regulatory frameworks. For applications subject to ROHS or REACH requirements, the Molex substitute provides regulatory compliance assurance.

Q: What is the significance of the mating cycles specification?

A: The Molex 0528062210 specifies 10 mating cycles, indicating mechanical durability for connector engagement and disengagement operations. The original part does not specify this parameter. For applications requiring frequent connector mating and unmatting, the Molex specification provides documented mechanical reliability data.