TE Connectivity AMP Connectors 282822-9 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 282822-9 is a 9-position terminal block header with male pins, shrouded on 2 sides, designed for vertical through-hole mounting with 0.197" (5.00mm) pitch spacing. This component operates at 300 V UL and 15 A UL current rating, with an operating temperature range of -40°C to 110°C. The part is manufactured from polyamide (PA66) nylon housing with copper alloy contacts and tin mating finish. Product status is active with RoHS compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the primary component becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative manufacturers meeting identical or compatible electrical and mechanical specifications.

Substiute Parts

282822-9

TE Connectivity AMP ConnectorsIn Stock: 1061282822-9 Datasheet

Current PartRFQ

1753576

Phoenix ContactIn Stock: 16001753576 Datasheet

SimilarRFQ

EDSTL955/9

On Shore Technology Inc.In Stock: 1011EDSTL955/9 Datasheet

SimilarRFQ

ELFH09250

Amphenol PCDIn Stock: 1111ELFH09250 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 282822-9 is determined by the following critical parameters:

Primary Matching Criteria:

• 9-position configuration
• 0.197" (5.00mm) pitch spacing (or 0.200" (5.08mm) with minor mechanical tolerance consideration)
• Vertical header orientation
• Male pin configuration
• Through-hole or solder mounting capability
• Minimum 300 V UL voltage rating
• Minimum 12 A current rating (UL or IEC)
• Shrouded design (2-side or 4-side acceptable)
• Solder termination style
• Operating temperature range compatibility

Compliance Criteria:

• RoHS compliance (RoHS3 or RoHS Compliant)
• MSL 1 (Unlimited) rating
• UL94 V-0 or equivalent flammability rating (where specified)
• ECCN EAR99 classification

The three substitute parts listed below meet these criteria with documented electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Phoenix Contact 1753576 (COMBICON MSTBV Series)

The Phoenix Contact 1753576 provides direct substitution for the TE Connectivity 282822-9. Both components share identical pitch (0.197" / 5.00mm), position count (9), orientation (vertical), shroud configuration (2-side), and mounting type (through-hole). Electrical ratings are compatible: 300 V UL and 12 A UL (versus 15 A on the primary part). Both components are RoHS3 compliant with MSL 1 rating and UL94 V-0 flammability rating. This substitute is suitable for applications where the 12 A current rating is sufficient. Inventory availability is 1550 pieces.

Amphenol PCD ELFH09250 (ELFH Series)

The Amphenol PCD ELFH09250 serves as a substitute with minor pitch variation (0.200" / 5.08mm versus 0.197" / 5.00mm). This component maintains 9-position configuration, vertical orientation, through-hole mounting, and solder termination. Electrical specifications match the primary part: 300 V UL and 15 A UL. The ELFH09250 features 4-side shrouding (versus 2-side on the primary part), providing enhanced EMI shielding. Housing material differs (PBT versus PA66), and contact material is brass rather than copper alloy. Both are RoHS3 compliant with UL94 V-0 rating. Operating temperature range is -40°C to 105°C. This substitute is suitable for applications requiring higher shrouding and is available in 1019 pieces.

On Shore Technology EDSTL955/9 (EDSTL955 Series)

The On Shore Technology EDSTL955/9 provides substitution with pitch compatibility (0.197" / 5.00mm) and 9-position configuration. This component features 4-side shrouding and vertical orientation. Mounting type is specified as solder (versus through-hole on the primary part). Voltage rating is 300 V UL. Operating temperature range is -30°C to 105°C. RoHS3 compliance and MSL 1 rating are confirmed. Current rating and additional electrical specifications are not provided in available documentation. This substitute is suitable for applications where solder mounting is preferred and is available in 943 pieces.

Selection Basis:

All three substitute parts maintain active product status and meet the core electrical requirements (300 V UL, minimum 12 A current). All are RoHS3 compliant with MSL 1 rating and ECCN EAR99 classification. Selection between substitutes depends on specific application requirements regarding current capacity, shrouding configuration, housing material, and mounting methodology.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1753576 replace the TE Connectivity 282822-9 in all applications?

A: The Phoenix Contact 1753576 is electrically and mechanically compatible for applications requiring up to 12 A at 300 V. The primary difference is the reduced current rating (12 A versus 15 A on the TE part). If your application requires the full 15 A capacity, the Amphenol PCD ELFH09250 is recommended as it maintains the 15 A rating.

Q: What is the significance of the pitch difference between the TE part (5.00mm) and the Amphenol part (5.08mm)?

A: The pitch difference of 0.08mm (0.003") is within standard mechanical tolerance for terminal block applications. Both components maintain 9-position configuration with compatible PCB footprint spacing for standard applications. However, for designs with tight mechanical constraints, verification of PCB layout compatibility is necessary.

Q: Why does the On Shore Technology EDSTL955/9 have a different mounting type (solder) compared to the primary part (through-hole)?

A: The EDSTL955/9 is designed for direct solder mounting to PCB pads rather than insertion into through-hole vias. This mounting methodology is functionally equivalent for electrical connection but requires different PCB design and assembly processes. Selection depends on your manufacturing capability and design requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. The TE Connectivity 282822-9 is RoHS Compliant, and all three substitute parts are ROHS3 Compliant. All components meet current RoHS directive requirements and are suitable for applications requiring RoHS compliance.

Q: What is the difference between 2-side and 4-side shrouding?

A: The primary TE part features 2-side shrouding (protection on two opposing sides), while the Amphenol and On Shore substitutes feature 4-side shrouding (protection on all four sides). Four-side shrouding provides enhanced EMI shielding and mechanical protection. Both configurations are functionally compatible for standard terminal block applications.

Q: Can I use the Amphenol ELFH09250 if my application requires the full 15 A current rating?

A: Yes. The Amphenol ELFH09250 maintains the 15 A UL current rating, matching the primary TE part. This substitute is suitable for applications requiring maximum current capacity.

Q: What housing material differences exist between the substitutes?

A: The TE primary part uses polyamide (PA66) nylon, the Phoenix Contact uses polyamide (PA) nylon, and the Amphenol uses polybutylene terephthalate (PBT). All materials meet UL94 V-0 flammability requirements. PBT offers enhanced chemical resistance and dimensional stability compared to polyamide, while polyamide provides superior impact resistance at low temperatures.

Q: Are all parts available in the same packaging?

A: Yes. All parts are supplied in bulk packaging. Inventory availability varies: TE Connectivity 282822-9 (1016 pieces), Phoenix Contact 1753576 (1550 pieces), On Shore Technology EDSTL955/9 (943 pieces), and Amphenol PCD ELFH09250 (1019 pieces).

Q: What is the operating temperature range compatibility?

A: The TE primary part operates from -40°C to 110°C. The Phoenix Contact 1753576 operating temperature is not specified. The On Shore EDSTL955/9 operates from -30°C to 105°C, and the Amphenol ELFH09250 operates from -40°C to 105°C. For applications requiring the full -40°C to 110°C range, the TE primary part or Amphenol substitute are recommended.