TE Connectivity AMP Connectors 282822-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 282822-7 is a 7-position terminal block header with male pins, shrouded on 2 sides, designed for vertical through-hole mounting with 0.197" (5.00mm) pitch spacing. This component is part of the Buchanan series and is classified as Active product status. The terminal block operates at 300 V UL and 15 A UL current rating, with solder termination and polyamide (PA66) nylon housing. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility is required within compatible electrical and mechanical parameters.

Substiute Parts

282822-7

TE Connectivity AMP ConnectorsIn Stock: 1126282822-7 Datasheet

Current PartRFQ

1753534

Phoenix ContactIn Stock: 28181753534 Datasheet

SimilarRFQ

EDSTL955/7

On Shore Technology Inc.In Stock: 1137EDSTL955/7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 282822-7 are qualified based on the following critical parameters that determine functional compatibility:

Primary Matching Criteria:

• Number of positions: 7
• Pitch spacing: 0.197" (5.00mm)
• Header orientation: Vertical
• Voltage rating: 300 V UL minimum
• Termination method: Solder compatible
• Housing material: Polyamide (PA) or Nylon
• Contact mating finish: Tin
• Insulation height: 0.472" (12.00mm) or equivalent

Substitution Logic: Parts are grouped as equivalent when they maintain identical position count, pitch spacing, vertical orientation, and voltage/current ratings within UL specifications. Housing shrouding configuration (2-side vs. 4-side) and contact tail length variations are noted as design differences that may affect mechanical fit in specific applications but do not preclude functional substitution when circuit board layout accommodates the physical differences.

Parameter Comparison

Engineering Selection Recommendations

282822-7 (TE Connectivity AMP Connectors - Primary Part) Select this part when the original design specification calls for TE Connectivity Buchanan series components, 2-side shrouding configuration, and the extended operating temperature range of -40°C to 110°C is required. This part maintains Active product status and RoHS compliance.

1753534 (Phoenix Contact - Equivalent Substitute) This part qualifies as a direct functional equivalent with matching 7-position, 5.00mm pitch, vertical orientation, and 300 V UL rating. The Phoenix Contact COMBICON MSTBV series maintains identical insulation height (0.472") and tin contact finish. Current rating is 12 A UL, which is lower than the primary part's 15 A rating; applications requiring the full 15 A capacity must retain the original 282822-7. This substitute is ROHS3 compliant and REACH Unaffected, providing enhanced regulatory documentation. Inventory availability is higher (2750 pcs vs. 1078 pcs).

EDSTL955/7 (On Shore Technology - Conditional Substitute) This part shares the 7-position, 5.00mm pitch, and vertical orientation with the primary part and meets the 300 V UL voltage requirement. However, the insulation height is significantly reduced (0.154" vs. 0.472"), and the shrouding configuration is 4-side rather than 2-side. These mechanical differences may affect circuit board layout compatibility and require verification of physical fit within the target application. The contact tail length is longer (0.154" vs. 0.138"), which may impact PCB hole spacing requirements. Operating temperature range is -30°C to 105°C, which does not extend to the -40°C lower limit of the primary part. This part is ROHS3 compliant and REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1753534 be used as a direct replacement for the TE Connectivity 282822-7?

A: The Phoenix Contact 1753534 is functionally equivalent for applications requiring up to 12 A at 300 V UL. Both parts share identical 7-position count, 5.00mm pitch, vertical orientation, and 0.472" insulation height. If the application circuit requires the full 15 A capacity of the original part, the 282822-7 must be retained. For 12 A or lower current applications, the 1753534 provides equivalent electrical performance with improved regulatory documentation (ROHS3 and REACH Unaffected status).

Q: What are the key differences between the On Shore Technology EDSTL955/7 and the TE Connectivity 282822-7?

A: The EDSTL955/7 differs in three significant ways: (1) insulation height is 0.154" compared to 0.472", which may affect circuit board clearance and mechanical fit; (2) shrouding is 4-side rather than 2-side, changing the physical profile; (3) operating temperature range is -30°C to 105°C versus -40°C to 110°C. These differences require physical verification of fit within the target application before substitution.

Q: Are all three parts RoHS compliant?

A: Yes. The TE Connectivity 282822-7 is RoHS Compliant. Both substitute parts (Phoenix Contact 1753534 and On Shore Technology EDSTL955/7) are ROHS3 Compliant, which represents an updated compliance standard. All three parts have Moisture Sensitivity Level 1 (Unlimited).

Q: What is the impact of contact tail length differences on substitution?

A: The TE Connectivity 282822-7 has a contact tail length of 0.138" (3.50mm), while both substitute parts have 0.154" (3.90mm) tail length. This 0.016" difference affects the depth of insertion into circuit board holes and may require adjustment of PCB hole depth specifications. Verify that the target PCB design accommodates the longer tail length before substitution.

Q: Can the EDSTL955/7 be used in applications requiring -40°C operation?

A: No. The EDSTL955/7 operating temperature range is -30°C to 105°C, which does not extend to the -40°C lower limit. Applications requiring -40°C operation must use either the TE Connectivity 282822-7 (-40°C to 110°C) or verify that the Phoenix Contact 1753534 meets the specific application temperature requirements (operating temperature range not specified in available data).

Q: How do the shrouding configurations affect mechanical compatibility?

A: The TE Connectivity 282822-7 and Phoenix Contact 1753534 both feature 2-side shrouding, providing identical mechanical profiles. The On Shore Technology EDSTL955/7 features 4-side shrouding, which increases the overall physical envelope and may interfere with adjacent components or circuit board layout. Verify mechanical clearance before substituting the EDSTL955/7 in existing designs.

Q: What is the current rating difference between the 282822-7 and 1753534?

A: The TE Connectivity 282822-7 is rated for 15 A UL, while the Phoenix Contact 1753534 is rated for 12 A UL. For applications requiring currents between 12 A and 15 A, the original 282822-7 must be used. For applications at 12 A or below, the 1753534 provides equivalent performance.