TE Connectivity AMP Connectors 2-796636-8 Terminal Block Header Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-796636-8 is a 15-position terminal block header with male pins, shrouded on four sides, designed for vertical through-hole mounting with 0.200" (5.08mm) pitch spacing. This component is classified as an active product and serves as a connector interface for electrical termination in industrial and commercial applications. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when supply chain flexibility is required.

Substiute Parts

2-796636-8

TE Connectivity AMP ConnectorsIn Stock: 8072-796636-8 Datasheet

Current PartRFQ

1755862

Phoenix ContactIn Stock: 8471755862 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 2-796636-8 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 15
• Pitch: 0.200" (5.08mm)
• Header Orientation: Vertical
• Type: Header, Male Pins, Shrouded (4 Side)
• Mounting Type: Through Hole
• Termination Style: Solder
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

Acceptable Variation Parameters:

• Current Rating: Substitute may meet or exceed UL current specification
• Voltage Rating: Substitute must meet or exceed UL voltage specification
• Contact Tail Length: Minor dimensional variation acceptable within mechanical tolerance
• Insulation Height: Must match primary specification

The Phoenix Contact 1755862 satisfies all mandatory matching parameters and meets or exceeds electrical performance specifications, qualifying it as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 2-796636-8 (Primary Part)

Selection is appropriate when:

• TE Connectivity supply chain is preferred or established
• UL current rating of 15 A is required for the application
• Contact tail length of 0.138" (3.50mm) is specified in PCB design

Phoenix Contact 1755862 (Substitute Part)

Selection is appropriate when:

• TE Connectivity 2-796636-8 is unavailable
• Application current requirement does not exceed 12 A
• Phoenix Contact supply chain is preferred or established
• Contact tail length of 0.154" (3.90mm) is compatible with PCB design

Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and operate across the same temperature range. Both maintain identical pitch, position count, and shrouded male pin configuration. The primary electrical difference is the UL current rating: the TE Connectivity part is rated for 15 A while the Phoenix Contact part is rated for 12 A. Both meet the 300 V UL voltage specification.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1755862 be used in place of the TE Connectivity 2-796636-8 in all applications?

A: The Phoenix Contact 1755862 is a direct substitute provided the application current requirement does not exceed 12 A. The TE Connectivity part supports 15 A. If the circuit requires 15 A operation, the TE Connectivity part must be used. Both parts share identical pitch, position count, orientation, and mounting configuration.

Q: What is the significance of the contact tail length difference between these parts?

A: The TE Connectivity 2-796636-8 has a contact tail length of 0.138" (3.50mm), while the Phoenix Contact 1755862 has 0.154" (3.90mm). This difference affects PCB hole depth and solder joint geometry. PCB design must accommodate the specific contact tail length of the selected part.

Q: Are both parts suitable for the same voltage applications?

A: Yes. Both parts are rated for 300 V under UL specifications and are suitable for identical voltage applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the operating temperature range for both parts?

A: The TE Connectivity 2-796636-8 operates from -40°C to 110°C. Operating temperature data for the Phoenix Contact 1755862 was not provided in the specification parameters.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in bulk packaging.

Q: What is the moisture sensitivity level for these components?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.