TE Connectivity AMP Connectors 2-767004-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-767004-2 is a 38 Position Connector Receptacle with Center Strip Contacts designed for Surface Mount applications. This rectangular connector operates within the MICTOR series and features gold-plated contacts with a 0.025" (0.64mm) pitch configuration across 2 rows.

The 2-767004-2 is classified as Obsolete. Identification of equivalent and substitute parts is necessary to support ongoing design requirements, production continuity, and system maintenance where this connector type is specified.

Substiute Parts

2-767004-2

TE Connectivity AMP ConnectorsIn Stock: 6236602-767004-2 Datasheet

Current PartRFQ

2-5767004-2

TE Connectivity AMP ConnectorsIn Stock: 19532-5767004-2 Datasheet

DirectRFQ

5767110-1

TE Connectivity AMP ConnectorsIn Stock: 38385767110-1 Datasheet

Parametric EquivalentRFQ

5767181-1

TE Connectivity AMP ConnectorsIn Stock: 8475767181-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2-767004-2 are qualified based on electrical and mechanical parameter equivalence within the rectangular connector category. The following parameters determine substitution eligibility:

Critical Matching Parameters:

• Connector Type: Receptacle, Center Strip Contacts
• Number of Positions: 38
• Pitch: 0.025" (0.64mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Height Above Board: 0.236" (6.00mm)
• Features: Board Guide, Ground Bus (Plane)
• Moisture Sensitivity Level: 1 (Unlimited)
• Mated Stacking Heights: 6.6mm, 9mm, 10.92mm, 12.57mm, 17.96mm, 18.75mm, 20mm, 22.86mm

All substitute parts listed maintain identical electrical and mechanical specifications to the main part number. Differences exist only in product status, RoHS compliance level, and REACH regulatory classification.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: 2-5767004-2

The 2-5767004-2 is the direct manufacturer equivalent to the obsolete 2-767004-2. This part maintains identical electrical and mechanical specifications while offering Active product status and ROHS3 compliance. The 2-5767004-2 is REACH Unaffected, eliminating regulatory concerns associated with the original part. Current inventory of 1,940 pieces supports production requirements.

Secondary Substitutes: 5767110-1 and 5767181-1

Both 5767110-1 and 5767181-1 are parametric equivalents that satisfy all electrical and mechanical requirements. These parts are Active status with REACH Unaffected classification. The 5767110-1 offers higher inventory availability at 3,732 pieces. The 5767181-1 provides an alternative with RoHS Compliant status and 772 pieces in stock.

Regulatory Compliance Considerations

The original 2-767004-2 is RoHS non-compliant and REACH Affected. All substitute parts resolve these regulatory constraints through either ROHS3 Compliant or RoHS Compliant status and REACH Unaffected classification. Selection should align with applicable regulatory requirements for the end application and target market.

Frequently Asked Questions (FAQ)

Q: Can the 2-5767004-2 be used as a direct replacement for the 2-767004-2?

A: Yes. The 2-5767004-2 maintains identical electrical and mechanical specifications to the 2-767004-2, including connector type, position count, pitch, mounting configuration, contact finish, and height above board. The primary differences are product status (Active versus Obsolete) and regulatory compliance (ROHS3 Compliant and REACH Unaffected versus RoHS non-compliant and REACH Affected).

Q: What is the difference between the three substitute parts?

A: All three substitute parts (2-5767004-2, 5767110-1, and 5767181-1) are electrically and mechanically identical. Differences exist in base product numbers, inventory levels, and RoHS compliance classification. The 2-5767004-2 and 5767110-1 are ROHS3 Compliant, while 5767181-1 is RoHS Compliant. All three are REACH Unaffected.

Q: Are these parts interchangeable in existing designs?

A: Yes. All substitute parts share identical connector type, position configuration, pitch, mounting type, contact finish, and physical dimensions. Designs utilizing the 2-767004-2 can incorporate any of the substitute parts without modification to PCB layout, mating connector specifications, or electrical performance.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating?

A: All parts in this comparison carry MSL 1 (Unlimited), indicating no moisture sensitivity constraints. These connectors do not require special handling, storage, or baking procedures prior to assembly.

Q: How do the mated stacking heights affect part selection?

A: The mated stacking heights (6.6mm through 22.86mm) define the vertical distance between mated connector pairs. All substitute parts support the same stacking height options, ensuring compatibility with existing mating connector specifications and system mechanical design.

Q: What is the significance of the Board Guide and Ground Bus features?

A: The Board Guide provides mechanical alignment and stability during PCB assembly. The Ground Bus (Plane) feature establishes a continuous ground reference across the connector. All substitute parts include both features, maintaining electrical performance and mechanical reliability equivalent to the original part.

Q: Are there inventory considerations for part selection?

A: Current inventory levels are 1,940 pieces for 2-5767004-2, 3,732 pieces for 5767110-1, and 772 pieces for 5767181-1. Inventory availability may influence selection for high-volume production requirements.