Honeywell 26PCCFJ6G23 Pressure Sensor Equivalent & Substitute Parts

Part Overview

The Honeywell 26PCCFJ6G23 is an active, board-mount pressure sensor designed for compound pressure measurement applications. This ±15PSI (±103.42kPa) sensor features a Wheatstone Bridge output with 0 mV to 100 mV signal range and operates across -40°C to 85°C. The component utilizes a male needle port with 0.07" (1.78mm) tube connection and is packaged in a 4-SIP module configuration with PC pin termination for through-hole mounting.

Identifying equivalent and substitute parts is necessary when addressing inventory constraints, supply chain disruptions, or specific packaging requirements while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

26PCCFJ6G23

Honeywell Sensing and Productivity SolutionsIn Stock: 81826PCCFJ6G23 Datasheet

Current PartRFQ

26PCCFJ2G

Honeywell Sensing and Productivity SolutionsIn Stock: 89926PCCFJ2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 26PCCFJ6G23 is determined by strict equivalence across the following critical parameters:

Pressure Specifications: Operating pressure of ±15PSI (±103.42kPa) and maximum pressure rating of ±45PSI (±310.26kPa) must be identical.

Electrical Characteristics: Output type (Wheatstone Bridge), output range (0 mV ~ 100 mV at 10V), accuracy (±0.5%), and supply voltage range (2.5V ~ 16V) must match exactly.

Mechanical Interface: Port configuration (Male - 0.07" needle tube), termination style (PC Pin), mounting type (Through Hole), and package format (4-SIP Module) must be identical.

Environmental & Compliance: Operating temperature range (-40°C ~ 85°C), temperature compensation feature, RoHS compliance, and MSL rating (1) must be maintained.

Series Continuity: The substitute part must belong to the Honeywell 26PC series and maintain Active product status.

Packaging format represents the only allowable variation parameter, provided all other specifications remain unchanged.

Parameter Comparison

Engineering Selection Recommendations

The 26PCCFJ2G qualifies as a direct parametric equivalent to the 26PCCFJ6G23 based on complete alignment of all electrical, mechanical, and environmental specifications. Both components are manufactured by Honeywell Sensing and Productivity Solutions, maintain Active product status, and carry identical RoHS compliance and MSL ratings.

The sole difference between these parts is packaging format: the 26PCCFJ6G23 is supplied in tape and reel configuration, while the 26PCCFJ2G is supplied in bulk packaging. This distinction affects procurement logistics and component handling but does not alter functional performance or circuit-level compatibility.

Selection between these equivalent parts should be based on procurement requirements, inventory management practices, and supply chain availability rather than technical performance criteria.

Frequently Asked Questions (FAQ)

Q: Can the 26PCCFJ2G be used as a direct replacement for the 26PCCFJ6G23 in existing circuit designs?

A: Yes. The 26PCCFJ2G is a parametric equivalent with identical electrical output characteristics, pressure specifications, operating temperature range, and mechanical interface. No circuit modifications are required.

Q: What is the difference between the tape and reel packaging of the 26PCCFJ6G23 and the bulk packaging of the 26PCCFJ2G?

A: Packaging format affects component delivery and handling methods. Tape and reel packaging is optimized for automated assembly processes, while bulk packaging is suitable for manual assembly or lower-volume applications. Both formats contain the same component with identical specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both the 26PCCFJ6G23 and 26PCCFJ2G are RoHS Compliant and carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Do these sensors require any special handling or storage conditions?

A: Both components carry MSL rating 1 (Unlimited), which means they do not require special moisture control or baking procedures prior to assembly.

Q: Can these pressure sensors be used in applications requiring higher pressure ratings?

A: No. Both parts are rated for ±15PSI operating pressure with a maximum pressure limit of ±45PSI. Applications requiring higher pressure ratings require selection of alternative sensor models from the Honeywell 26PC series with higher pressure specifications.

Q: What is the output signal format of these sensors?

A: Both sensors utilize a Wheatstone Bridge output configuration with a signal range of 0 mV to 100 mV when supplied with 10V excitation voltage. The supply voltage range is 2.5V to 16V.