Equivalent & Substitute Parts for Honeywell 26PCCFD6G Pressure Sensor

Part Overview

The Honeywell 26PCCFD6G is an active, board-mount pressure sensor designed for compound pressure measurement applications. This 4-SIP module sensor operates within a ±15PSI (±103.42kPa) range with Wheatstone Bridge output and temperature compensation. The part is RoHS compliant and currently in active production status with 946 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

26PCCFD6G

Honeywell Sensing and Productivity SolutionsIn Stock: 97426PCCFD6G Datasheet

Current PartRFQ

26PCCFD2G

Honeywell Sensing and Productivity SolutionsIn Stock: 98926PCCFD2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 26PCCFD6G are identified based on strict parametric equivalence within the 26PC series. The substitution logic is based on the following critical parameters that must remain identical:

• Pressure Type: Compound
• Operating Pressure Range: ±15PSI (±103.42kPa)
• Output Type: Wheatstone Bridge
• Output Range: 0 mV ~ 100 mV (10V)
• Accuracy: ±0.5%
• Supply Voltage Range: 2.5V ~ 16V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: 4-SIP Module
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Temperature Compensation: Yes
• Port Style: No Port
• RoHS Compliance: Yes

Parts meeting all these parameters are classified as parametric equivalents and may be substituted in applications where the 26PCCFD6G is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the 26PCCFD6G and 26PCCFD2G are active products manufactured by Honeywell Sensing and Productivity Solutions. Selection between these parts should be based on:

Product Availability: The 26PCCFD2G currently maintains higher inventory levels (970 units) compared to the 26PCCFD6G (946 units), making it suitable for high-volume procurement scenarios.

Compliance Status: Both parts maintain identical RoHS compliance and MSL ratings, ensuring equivalent environmental and regulatory suitability for applications requiring compliance documentation.

Electrical and Mechanical Compatibility: The parts are fully interchangeable from an electrical and mechanical standpoint, with identical pressure ranges, output characteristics, supply voltage requirements, and thermal operating windows.

Series Continuity: Both parts belong to the 26PC series with the same base product number (26PCCFD), confirming design-level compatibility within the product family.

Frequently Asked Questions (FAQ)

Q: Can the 26PCCFD2G be used as a direct replacement for the 26PCCFD6G in existing designs?

A: Yes. The 26PCCFD2G is a parametric equivalent with identical electrical specifications, output characteristics, accuracy, supply voltage range, operating temperature range, and package configuration. No circuit modifications are required.

Q: Are there any differences in the 4-SIP module pinout between these parts?

A: No differences are specified in the provided parameters. Both parts use PC Pin termination in a 4-SIP Module package with identical mounting type (Through Hole).

Q: Do both parts support the same pressure measurement range?

A: Yes. Both the 26PCCFD6G and 26PCCFD2G operate at ±15PSI (±103.42kPa) with a maximum pressure rating of ±45PSI (±310.26kPa) and maintain ±0.5% accuracy across the operating range.

Q: What is the significance of the different part number suffixes (6G vs. 2G)?

A: The suffix designates internal manufacturing variants within the 26PC series. Both variants meet identical electrical and mechanical specifications for the parameters listed in this reference.

Q: Are temperature compensation characteristics identical between the two parts?

A: Yes. Both parts include temperature compensation and operate across the identical temperature range of -40°C to 85°C.

Q: Can these parts be used interchangeably in high-volume production?

A: Yes, provided that the application requirements match the specified parameters. Both parts are active products with RoHS compliance and MSL Level 1 ratings suitable for production environments.