Honeywell 26PCCFA3D Pressure Sensor: Equivalent & Substitute Parts

Part Overview

The Honeywell 26PCCFA3D is an active, board-mount differential pressure sensor designed for applications requiring ±15PSI measurement capability. This 4-SIP module sensor features a Wheatstone Bridge output with 0 mV ~ 100 mV signal range and operates across -40°C to 85°C. The sensor is RoHS compliant and currently in active production status. Substitute parts are identified when inventory constraints, supply chain disruptions, or design revisions necessitate alternative component selection while maintaining identical electrical and mechanical specifications.

Substiute Parts

26PCCFA3D

Honeywell Sensing and Productivity SolutionsIn Stock: 111026PCCFA3D Datasheet

Current PartRFQ

26PCCNA3D

Honeywell Sensing and Productivity SolutionsIn Stock: 78026PCCNA3D Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 26PCCFA3D is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish the substitution criteria:

Pressure Specifications: Operating pressure of ±15PSI (±103.42kPa) and maximum pressure rating of ±45PSI (±310.26kPa) must be identical.

Output Characteristics: Wheatstone Bridge output type with 0 mV ~ 100 mV (10V) signal range must be maintained.

Electrical Performance: Accuracy of ±0.5% and supply voltage range of 2.5V ~ 16V must be preserved.

Physical Interface: Port configuration must be Male - 0.2" (5.08mm) Tube, Dual with Barbless style.

Package and Mounting: 4-SIP Module package with Through Hole mounting and PC Pin termination style must be identical.

Environmental Compliance: Operating temperature range of -40°C ~ 85°C, RoHS compliance, and MSL rating of 1 must be maintained.

Temperature Compensation: Feature must be present in substitute parts.

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The 26PCCNA3D is a direct parametric equivalent to the 26PCCFA3D. Both components are manufactured by Honeywell Sensing and Productivity Solutions, maintain active product status, and carry identical electrical, mechanical, and environmental specifications. Selection between these parts is based on availability and supply chain considerations rather than technical differentiation.

Both parts are RoHS compliant and carry MSL rating 1, indicating unlimited shelf life under standard storage conditions. The identical 4-SIP package configuration, Through Hole mounting, and PC Pin termination ensure direct interchangeability in board-level applications without design modification.

Frequently Asked Questions (FAQ)

Q: Can the 26PCCNA3D be used as a direct replacement for the 26PCCFA3D?

A: Yes. The 26PCCNA3D is a parametric equivalent with identical specifications across all electrical, mechanical, and environmental parameters. No design changes are required for substitution.

Q: Are there any differences in the output signal between these two parts?

A: No. Both parts provide identical Wheatstone Bridge output with 0 mV ~ 100 mV (10V) range and ±0.5% accuracy.

Q: Do both parts have the same pressure rating?

A: Yes. Both the 26PCCFA3D and 26PCCNA3D operate at ±15PSI (±103.42kPa) with a maximum pressure rating of ±45PSI (±310.26kPa).

Q: Are the package dimensions and pin configurations identical?

A: Yes. Both parts use the 4-SIP Module package with Through Hole mounting and PC Pin termination. The physical footprint and pin layout are identical.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 85°C with temperature compensation built into the sensor design.

Q: Are both parts RoHS compliant?

A: Yes. Both the 26PCCFA3D and 26PCCNA3D are RoHS compliant with MSL rating 1.

Q: What supply voltage range do these sensors require?

A: Both parts accept supply voltage from 2.5V to 16V, providing flexibility in circuit design.

Q: Can these sensors be used interchangeably in existing PCB designs?

A: Yes. The identical 4-SIP package configuration and PC Pin termination allow direct substitution without PCB layout modifications.