26220C Equivalent & Substitute Parts

Part Overview

The 26220C is a 22 µH unshielded wirewound inductor manufactured by Murata Power Solutions, rated for 1.95 A with a maximum DC resistance of 100mOhm. This component is classified as Active and is RoHS3 compliant. The part is available in Surface Mount packaging with nonstandard dimensions (10.00mm x 9.00mm x 5.80mm maximum height). Equivalent parts are identified when they maintain the same electrical specifications and mechanical compatibility for direct circuit board substitution.

Substiute Parts

26220C

Murata Power SolutionsIn Stock: 96626220C Datasheet

Current PartRFQ

SDR1006-220ML

Bourns Inc.In Stock: 6778SDR1006-220ML Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 26220C is determined by strict equivalence across the following critical parameters:

• Inductance value: 22 µH (exact match required)
• Current rating: 1.95 A minimum
• DC resistance: 100mOhm maximum
• Shielding configuration: Unshielded
• Mounting type: Surface Mount
• Regulatory compliance: RoHS3 compliant

The SDR1006-220ML from Bourns Inc. meets all substitution criteria. Both parts share identical inductance, current rating, and DC resistance specifications. Physical dimensions are comparable (9.80mm x 9.80mm vs. 10.00mm x 9.00mm), with matching seated height of 5.80mm maximum. Both components are RoHS3 compliant and rated for unlimited moisture sensitivity.

Parameter Comparison

Engineering Selection Recommendations

Both the 26220C and SDR1006-220ML are Active products with current RoHS3 compliance and REACH unaffected status. Selection between these parts is based on availability, packaging format preference, and operating temperature requirements. The SDR1006-220ML supports an extended operating temperature range of -40°C to 125°C compared to the 26220C range of -40°C to 85°C. For applications requiring operation above 85°C, the SDR1006-220ML is the appropriate selection. Both parts carry identical regulatory classifications (EAR99, HTSUS 8504.50.4000) and moisture sensitivity ratings.

Frequently Asked Questions (FAQ)

Q: Can the SDR1006-220ML directly replace the 26220C on a circuit board?

A: Yes. Both inductors share identical electrical specifications (22 µH, 1.95 A, 100mOhm DCR) and matching seated height (5.80mm maximum). Physical footprint dimensions are comparable, with the SDR1006-220ML measuring 9.80mm x 9.80mm versus the 26220C at 10.00mm x 9.00mm. Pad layout compatibility should be verified for the specific application.

Q: What is the difference in core material between these parts?

A: The 26220C uses a wirewound construction with unspecified core material. The SDR1006-220ML uses a ferrite drum core with wirewound construction. Both achieve the same inductance and current rating specifications.

Q: Are there packaging differences between these parts?

A: The 26220C is supplied in Tape & Reel (TR) format. The SDR1006-220ML is available in Cut Tape (CT) and Digi-Reel® formats. Packaging selection depends on assembly line requirements and order quantities.

Q: Which part should be selected for high-temperature applications?

A: The SDR1006-220ML supports operation from -40°C to 125°C, providing a 40°C higher maximum temperature rating than the 26220C (-40°C to 85°C). For applications exceeding 85°C, the SDR1006-220ML is the required selection.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the 26220C and SDR1006-220ML are RoHS3 compliant, REACH unaffected, and classified as EAR99 with HTSUS code 8504.50.4000. Both carry Moisture Sensitivity Level 1 (Unlimited).