Amphenol RF 262115 MMCX Connector Jack Equivalent & Substitute Parts

Part Overview

The Amphenol RF 262115 is an MMCX connector jack designed as a female socket with 50 ohm impedance for board edge mounting applications. This component features surface mount solder termination and snap-on fastening, operating at frequencies up to 6 GHz. The part is currently active in production status with 899 pieces available in stock inventory.

Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or packaging format preferences while maintaining full electrical and mechanical compatibility.

Substiute Parts

262115

Amphenol RFIn Stock: 978262115 Datasheet

Current PartRFQ

262107

Amphenol RFIn Stock: 1510262107 Datasheet

Parametric EquivalentRFQ

135-3711-801

Cinch Connectivity SolutionsIn Stock: 20724135-3711-801 Datasheet

SimilarRFQ

0734150969

MolexIn Stock: 17980734150969 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol RF 262115 are classified based on strict electrical and mechanical parameter matching. All identified substitutes maintain identical specifications across the following critical parameters:

Electrical Parameters:

• Connector style: MMCX
• Connector type: Jack, Female Socket
• Impedance: 50 Ohms
• Frequency maximum: 6 GHz
• Voltage rating: 170 V
• Mating cycles: 500

Mechanical Parameters:

• Mounting type: Board Edge, Cutout; Surface Mount
• Contact termination: Solder
• Shield termination: Solder
• Fastening type: Snap-On
• Number of ports: 1

Material Specifications:

• Center contact material: Beryllium Copper
• Body material: Brass
• Body finish: Gold
• Center contact plating: Gold
• Dielectric material: Polytetrafluoroethylene (PTFE)

Compliance:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Affected

Substitutes are differentiated by manufacturer origin and packaging format only, with no variation in functional or performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full compliance with ROHS3 and REACH regulatory requirements, matching the primary part specification. Selection between the Amphenol RF 262115 and its substitutes is determined by availability, packaging format requirements, and manufacturer preference.

Amphenol RF 262107 is a parametric equivalent from the same manufacturer, differentiated only by packaging format (Bag versus unspecified) and higher inventory availability at 1441 pieces.

Cinch Connectivity Solutions 135-3711-801 provides cross-manufacturer substitution with identical electrical and mechanical specifications. This part offers the highest inventory availability at 20648 pieces and is supplied in bulk packaging format.

Molex 0734150969 is a parametric equivalent from an alternative manufacturer, supplied in bulk packaging with 1704 pieces in inventory. This part is designated as part of the Molex 73415 series.

All three substitute parts are active in production status and maintain identical performance characteristics across all specified electrical, mechanical, and material parameters.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 262107 be used as a direct replacement for the Amphenol RF 262115?

A: Yes. The 262107 is a parametric equivalent with identical electrical and mechanical specifications. The only difference is packaging format (Bag versus unspecified). Both parts are manufactured by Amphenol RF and maintain the same performance characteristics.

Q: What are the key differences between the Amphenol RF 262115 and the Cinch Connectivity Solutions 135-3711-801?

A: The parts are electrically and mechanically identical across all specified parameters. The primary differences are manufacturer origin and packaging format. The Cinch part is supplied in bulk packaging and has significantly higher inventory availability.

Q: Is the Molex 0734150969 compatible with the Amphenol RF 262115 in terms of electrical performance?

A: Yes. The Molex 0734150969 maintains identical impedance (50 Ohms), frequency rating (6 GHz), voltage rating (170 V), and all other electrical specifications. It is a parametric equivalent suitable for direct substitution.

Q: Are there any operating temperature differences between these parts?

A: The Amphenol RF 262115 does not specify an operating temperature range. The Cinch 135-3711-801 specifies -55°C to 155°C, and the Molex 0734150969 specifies -55°C to 165°C. All parts maintain identical electrical performance within their respective operating ranges.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All parts are ROHS3 compliant, REACH affected, and carry identical regulatory certifications. Moisture Sensitivity Level is 1 (Unlimited) for all parts.

Q: What is the difference in packaging between these parts?

A: The Amphenol RF 262115 packaging is not specified. The Amphenol RF 262107 is supplied in Bag format. Both the Cinch 135-3711-801 and Molex 0734150969 are supplied in Bulk format. Packaging selection depends on assembly process requirements and inventory management practices.

Q: Can these parts be used interchangeably in production?

A: Yes. All substitute parts are parametric equivalents with identical electrical and mechanical specifications. They can be used interchangeably provided that packaging format and inventory availability align with production requirements.