Amphenol RF 262114-10 MMCX Connector Plug Equivalent & Substitute Parts

Part Overview

The Amphenol RF 262114-10 is an MMCX connector plug designed for RF coaxial applications requiring 50 Ohm impedance. This male pin connector features through-hole solder termination and snap-on fastening, suitable for PCB integration in RF signal transmission systems. The part is currently active in production with 940 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring MMCX plug connectors with identical electrical and mechanical specifications.

Substiute Parts

262114-10

Amphenol RFIn Stock: 1004262114-10 Datasheet

Current PartRFQ

135-3801-201

Cinch Connectivity SolutionsIn Stock: 4283135-3801-201 Datasheet

Parametric EquivalentRFQ

1408496-1

TE Connectivity AMP ConnectorsIn Stock: 8411408496-1 Datasheet

Parametric EquivalentRFQ

81_MMCX-50-0-1/111_OE

Huber+Suhner, Inc.In Stock: 150381_MMCX-50-0-1/111_OE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol RF 262114-10 are qualified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters:

Electrical Equivalence:

• Connector style: MMCX
• Connector type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency maximum: 6 GHz
• Number of ports: 1

Mechanical Equivalence:

• Mounting type: Through Hole
• Contact termination: Solder
• Shield termination: Solder
• Fastening type: Snap-On
• Housing color: Gold
• Body material: Brass
• Body finish: Gold
• Center contact plating: Gold
• Dielectric material: PTFE (or PTFE-compatible)
• Mating cycles: 500

Compliance Equivalence:

• RoHS3 Compliant
• REACH Affected
• ECCN: EAR99
• HTSUS: 8536.69.4010

All substitute parts listed maintain these core parameters, ensuring direct functional and physical compatibility with the primary part in PCB-mounted RF applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: Amphenol RF 262114-10

The Amphenol RF 262114-10 is the primary specification part with active product status and ROHS3 compliance. This part is suitable for new designs and ongoing production applications.

Active Substitute Options:

Cinch Connectivity Solutions 135-3801-201 is a direct parametric equivalent with active product status and ROHS3 compliance. This part offers the highest inventory availability (4225 units) and includes specified operating temperature range (-55°C to 155°C) and voltage rating (170 V). Selection of this part is appropriate for applications requiring maximum supply availability.

Huber+Suhner 81_MMCX-50-0-1/111_OE is a direct parametric equivalent with active product status and ROHS3 compliance. This part features dual dielectric material specification (PTFE and PFA) and REACH Unaffected status. Selection of this part is appropriate for applications with REACH compliance requirements or where PFA dielectric material is specified.

Obsolete Substitute Option:

TE Connectivity 1408496-1 carries obsolete product status and is not recommended for new designs or long-term production applications. This part is listed for reference only in legacy system documentation and reverse-engineering scenarios. Existing inventory (740 units) may be used for maintenance and repair of fielded equipment only.

Frequently Asked Questions (FAQ)

Q: Can the Cinch 135-3801-201 be used as a direct replacement for the Amphenol RF 262114-10?

A: Yes. The Cinch 135-3801-201 meets all parametric equivalence criteria for electrical and mechanical specifications, including connector style, impedance, mounting type, termination method, and frequency rating. Both parts are ROHS3 compliant and REACH Affected. The primary difference is center contact material (Beryllium Copper versus Brass), which does not affect functional compatibility in 50 Ohm RF applications.

Q: What is the difference between the Huber+Suhner 81_MMCX-50-0-1/111_OE and the Amphenol RF 262114-10?

A: Both parts are parametrically equivalent across all critical electrical and mechanical specifications. The Huber+Suhner part specifies dual dielectric materials (PTFE and PFA) and carries REACH Unaffected status, whereas the Amphenol part specifies PTFE only and is REACH Affected. Selection depends on regulatory requirements and dielectric material specifications for the application.

Q: Why is the TE Connectivity 1408496-1 listed if it is obsolete?

A: The TE Connectivity 1408496-1 is included for reference in applications involving legacy equipment maintenance, field repairs, and reverse-engineering documentation. This part is not suitable for new designs or production applications. Active alternatives (Cinch 135-3801-201 or Huber+Suhner 81_MMCX-50-0-1/111_OE) should be selected for ongoing applications.

Q: Are there operating temperature or voltage specifications for the Amphenol RF 262114-10?

A: Operating temperature and voltage rating specifications are not provided for the Amphenol RF 262114-10 in the primary specification data. The Cinch 135-3801-201 and TE Connectivity 1408496-1 specify operating temperature range of -55°C to 155°C and voltage rating of 170 V. The Huber+Suhner part specifies the same operating temperature and voltage range. Consult the manufacturer datasheet for complete thermal and electrical specifications of the Amphenol part.

Q: What is the significance of the center contact material difference between parts?

A: The Amphenol RF 262114-10 and TE Connectivity 1408496-1 specify Brass center contact material, while the Cinch 135-3801-201 and Huber+Suhner 81_MMCX-50-0-1/111_OE specify Beryllium Copper. Both materials are acceptable for 50 Ohm RF applications and do not affect impedance or frequency performance. Material selection may influence mechanical durability and mating cycle performance, but both materials meet the specified 500 mating cycle requirement.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. All substitute parts share identical mounting type (Through Hole), contact termination (Solder), shield termination (Solder), and fastening type (Snap-On). PCB footprints and solder pad layouts are compatible across all listed parts. No PCB redesign is required when substituting between these parts.

Q: What is the REACH Unaffected status of the Huber+Suhner part?

A: REACH Unaffected status indicates that the Huber+Suhner 81_MMCX-50-0-1/111_OE does not contain substances of very high concern (SVHC) listed under REACH regulations. This status may be advantageous for applications with strict REACH compliance requirements. The Amphenol RF 262114-10 and Cinch 135-3801-201 carry REACH Affected status, indicating potential presence of SVHC substances requiring regulatory documentation.

Q: Is inventory availability a factor in part selection?

A: Inventory availability is provided for reference only and should not be the primary selection criterion. The Cinch 135-3801-201 offers the highest inventory (4225 units), followed by Huber+Suhner (1395 units) and Amphenol RF (940 units). Part selection should prioritize product status, compliance requirements, and application specifications. Inventory levels are subject to change and should be verified with the supplier at the time of procurement.