26100C Equivalent & Substitute Parts

Part Overview

The 26100C is a 10 µH unshielded wirewound inductor manufactured by Murata Power Solutions Inc., rated for 2.6 A continuous current with a maximum DC resistance of 60 mOhm. This component is designed for surface mount applications in nonstandard package configurations and is currently in active production status. Alternative parts may be required due to inventory constraints, supply chain considerations, or specific application requirements that benefit from extended operating temperature ranges or alternative core materials.

Substiute Parts

26100C

Murata Power Solutions Inc.In Stock: 94726100C Datasheet

Current PartRFQ

SDR1006-100ML

Bourns Inc.In Stock: 5934SDR1006-100ML Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The SDR1006-100ML from Bourns Inc. qualifies as a direct substitute based on the following critical parameters:

• Inductance Value: Both parts specify 10 µH at 1 kHz test frequency
• Current Rating: Both rated for 2.6 A continuous current
• DC Resistance: Both maintain 60 mOhm maximum DC resistance
• Shielding Configuration: Both are unshielded designs
• Mounting Type: Both are surface mount components
• Package Classification: Both use nonstandard package configurations
• Compliance: Both are ROHS3 compliant and REACH unaffected

The substitute part incorporates a drum core ferrite construction compared to the main part's unspecified core material, and extends the operating temperature range to -40°C ~ 125°C, providing additional thermal margin for demanding applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 26100C and SDR1006-100ML maintain identical electrical specifications for inductance, current rating, and DC resistance. Selection between these parts should be based on:

26100C (Murata Power Solutions Inc.): Select when the standard operating temperature range of -40°C to 85°C is sufficient for the application and when Murata component qualification is required.

SDR1006-100ML (Bourns Inc.): Select when extended thermal performance to 125°C maximum operating temperature is beneficial, or when Bourns component qualification is specified. This part is currently available in higher inventory quantities (5900 pcs vs. 920 pcs).

Both parts are active products with full RoHS3 compliance and unlimited moisture sensitivity rating, ensuring long-term supply viability and environmental regulation adherence.

Frequently Asked Questions (FAQ)

Q: Are the 26100C and SDR1006-100ML electrically interchangeable?

A: Yes. Both parts specify identical inductance (10 µH), current rating (2.6 A), and DC resistance (60 mOhm max) at the same test frequency (1 kHz). They are electrically equivalent for standard circuit applications.

Q: What is the difference in self-resonant frequency between these parts?

A: The 26100C has a self-resonant frequency of 24.8 MHz, while the SDR1006-100ML is specified at 21 MHz. This difference reflects the different core materials and physical construction. For applications operating below these frequencies, this difference is not operationally significant.

Q: Can I use the SDR1006-100ML in place of the 26100C in high-temperature environments?

A: The SDR1006-100ML supports operating temperatures up to 125°C, compared to the 26100C maximum of 85°C. If your application requires sustained operation above 85°C, the SDR1006-100ML provides additional thermal margin.

Q: Are both parts available in the same package?

A: Both parts use nonstandard surface mount packages with identical seated heights (0.228" / 5.80mm max). Footprint dimensions are similar: 26100C is 10.00mm x 9.00mm, while SDR1006-100ML is 9.80mm x 9.80mm. Verify PCB layout compatibility before substitution.

Q: Do both parts have the same compliance certifications?

A: Yes. Both the 26100C and SDR1006-100ML are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS codes (8504.50.4000).