25MS710MEFC4X7 Equivalent & Substitute Parts

Part Overview

The 25MS710MEFC4X7 is a 10 µF, 25 V aluminum electrolytic capacitor in radial, can package manufactured by Rubycon from the MS7 series. This component is rated for 1000 hours at 85°C and is designed for general-purpose applications requiring through-hole mounting. The part carries an obsolete product status, making equivalent and substitute parts necessary for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Capacitance	10 µF
Tolerance	±20%
Voltage - Rated	25 V
Lifetime @ Temperature	1000 Hrs @ 85°C
Operating Temperature Range	-40°C ~ 85°C
Lead Spacing	0.059" (1.50mm)
Size / Dimension	0.157" Dia (4.00mm)
Height - Seated (Max)	0.315" (8.00mm)
Mounting Type	Through Hole
Package / Case	Radial, Can
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the 25MS710MEFC4X7 is determined by the following critical parameters:

Capacitance: Must remain 10 µF
Tolerance: Must remain ±20%
Voltage Rating: Minimum 25 V (higher ratings acceptable for drop-in replacement)
Lead Spacing: Must match 0.059" (1.50mm)
Physical Dimensions: Must fit within or match 0.157" Dia × 0.315" Max Height envelope
Mounting Type: Must be Through Hole, Radial configuration
Polarization: Must be Polar

Substitute parts are categorized into two groups:

Upgrade Substitutes (35 V rated): 35ML10MEFC4X7, 106PUM035M, and ESRG350ELL100MD07D provide higher voltage ratings while maintaining identical capacitance, tolerance, lead spacing, and physical dimensions. These parts are direct mechanical and electrical upgrades suitable for applications where the original 25 V rating is no longer required.

Similar Substitute (25 V rated): EEA-GA1E100 maintains the original 25 V voltage rating and capacitance specification, offering an alternative from a different manufacturer with active product status.

Parameter Comparison

Parameter	25MS710MEFC4X7	35ML10MEFC4X7	106PUM035M	ESRG350ELL100MD07D	EEA-GA1E100
Manufacturer	Rubycon	Rubycon	Cornell Dubilier / Illinois Capacitor	Chemi-Con	Panasonic Electronic Components
Capacitance	10 µF	10 µF	10 µF	10 µF	10 µF
Tolerance	±20%	±20%	±20%	±20%	±20%
Voltage - Rated	25 V	35 V	35 V	35 V	25 V
Lead Spacing	0.059" (1.50mm)	0.059" (1.50mm)	0.059" (1.50mm)	0.059" (1.50mm)	0.059" (1.50mm)
Size / Dimension	0.157" Dia (4.00mm)	0.157" Dia (4.00mm)	0.157" Dia (4.00mm)	0.157" Dia (4.00mm)	0.157" Dia (4.00mm)
Height - Seated (Max)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.276" (7.00mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Radial, Can	Radial, Can	Radial, Can	Radial, Can	Radial, Can
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 105°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 105°C
Lifetime @ Temperature	1000 Hrs @ 85°C	5000 Hrs @ 105°C	2000 Hrs @ 85°C	2000 Hrs @ 85°C	1000 Hrs @ 105°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
Product Status	Obsolete	Obsolete	Active	Active	Active

Engineering Selection Recommendations

For applications requiring direct replacement with identical electrical specifications:

EEA-GA1E100 (Panasonic) maintains the original 25 V voltage rating and 10 µF capacitance. This part carries active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment. The slightly reduced height (0.276" vs. 0.315") provides additional PCB layout flexibility.

For applications where voltage margin improvement is acceptable:

35ML10MEFC4X7 (Rubycon) provides a voltage upgrade to 35 V while maintaining identical physical dimensions and lead spacing. Despite obsolete status, this part shares the same manufacturer lineage as the original component. The extended operating temperature range (-40°C ~ 105°C) and significantly improved lifetime rating (5000 Hrs @ 105°C) offer enhanced reliability for demanding environments.

106PUM035M (Cornell Dubilier / Illinois Capacitor) and ESRG350ELL100MD07D (Chemi-Con) are both active-status alternatives rated at 35 V. Both maintain mechanical compatibility and offer improved lifetime specifications compared to the original part. 106PUM035M provides documented ESR specification (19.894 Ohm @ 120Hz), while ESRG350ELL100MD07D offers superior high-frequency ripple current performance (57.6 mA @ 100 kHz).

Frequently Asked Questions (FAQ)

Q: Can I use a 35 V rated capacitor in place of the 25 V original?

A: Yes. Higher voltage-rated capacitors are electrically compatible in applications designed for lower voltages. The 35 V substitutes (35ML10MEFC4X7, 106PUM035M, ESRG350ELL100MD07D) maintain identical capacitance, tolerance, and physical dimensions, making them direct mechanical replacements.

Q: What is the difference between the upgrade substitutes?

A: All three 35 V alternatives share the same electrical specifications (10 µF, ±20%, 35 V) and physical footprint. Key differences include manufacturer, product status, and thermal performance. 35ML10MEFC4X7 is obsolete but from the original manufacturer. 106PUM035M and ESRG350ELL100MD07D carry active status, ensuring ongoing availability. ESRG350ELL100MD07D provides superior high-frequency ripple current capability.

Q: Does the slightly shorter height of EEA-GA1E100 affect compatibility?

A: No. The EEA-GA1E100 height of 0.276" (7.00mm) is within the original envelope requirement of 0.315" (8.00mm) maximum. This reduced height may provide additional clearance on densely populated PCBs.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitutes carry either ROHS3 or RoHS compliance certification, meeting current regulatory requirements.

Q: Which substitute offers the best long-term availability?

A: 106PUM035M, ESRG350ELL100MD07D, and EEA-GA1E100 all carry active product status, ensuring continued manufacturing and supply chain support. The original 25MS710MEFC4X7 and 35ML10MEFC4X7 are obsolete and subject to inventory depletion.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message