25LC020AT-I/MC EEPROM Memory IC Equivalent & Substitute Parts

Part Overview

The 25LC020AT-I/MC is a 2Kbit Serial Peripheral Interface (SPI) EEPROM memory IC manufactured by Microchip Technology. This non-volatile memory device operates at 10 MHz with a supply voltage range of 2.5V to 5.5V and is housed in an 8-DFN (2x3) surface mount package. The device is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are identified when they maintain functional compatibility across memory capacity, interface protocol, organization, and core electrical specifications while accommodating variations in clock frequency, operating temperature range, and package form factors.

Key Parameters

Parameter	Value
Memory Size	2Kbit
Memory Organization	256 x 8
Memory Interface	SPI
Clock Frequency	10 MHz
Write Cycle Time	5ms
Voltage Supply Range	2.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package Type	8-DFN (2x3)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the 25LC020AT-I/MC is determined by the following critical parameters:

Core Functional Requirements (Non-Negotiable):

Memory capacity: 2Kbit
Memory organization: 256 x 8
Interface protocol: SPI
Non-volatile EEPROM technology

Allowable Variations:

Clock frequency: Equal to or greater than 10 MHz
Operating temperature range: Must encompass or exceed -40°C to 85°C minimum
Supply voltage range: Must encompass 2.5V to 5.5V or be compatible within this window
Package form factor: 8-pin DFN/UDFN/MLP variants with exposed pad
Write cycle time: Equal to or less than 5ms
Moisture sensitivity: MSL 1 or MSL 3 acceptable for standard applications

Compliance Requirements:

ROHS3 compliance maintained
Active product status preferred

Parameter Comparison

Parameter	25LC020AT-I/MC	25LC020AT-E/MC	AT25020B-MAHL-T	CAT25020HU4I-GT3	M95020-DRMF3TG/K
Manufacturer	Microchip Technology	Microchip Technology	Microchip Technology	onsemi	STMicroelectronics
Memory Size	2Kbit	2Kbit	2Kbit	2Kbit	2Kbit
Memory Organization	256 x 8	256 x 8	256 x 8	256 x 8	256 x 8
Memory Interface	SPI	SPI	SPI	SPI	SPI
Clock Frequency	10 MHz	10 MHz	20 MHz	10 MHz	20 MHz
Write Cycle Time	5ms	5ms	5ms	5ms	4ms
Voltage Supply Range	2.5V ~ 5.5V	2.5V ~ 5.5V	1.8V ~ 5.5V	1.8V ~ 5.5V	1.8V ~ 5.5V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 125°C
Package Type	8-DFN (2x3)	8-DFN (2x3)	8-UDFN (2x3)	8-UDFN-EP (2x3)	8-MLP (2x3)
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	3 (168 Hours)	1 (Unlimited)	1 (Unlimited)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

25LC020AT-E/MC (Microchip Technology)

This part is the manufacturer-recommended primary substitute. It maintains identical memory specifications, SPI interface, and package form factor as the 25LC020AT-I/MC. The extended operating temperature range (-40°C to 125°C) provides additional thermal margin. Both parts are ROHS3 compliant with MSL 1 rating and active product status. The 25LC020AT-E/MC is verified as programmable through DiGi-Electronics, providing additional qualification assurance.

AT25020B-MAHL-T (Microchip Technology)

This substitute offers doubled clock frequency (20 MHz) while maintaining the 2Kbit capacity and SPI interface. The supply voltage range extends to 1.8V minimum, providing broader compatibility. The 8-UDFN package is mechanically compatible with the original 8-DFN form factor. Operating temperature remains -40°C to 85°C. MSL 3 rating requires controlled storage conditions (168-hour limit after moisture exposure). This part is suitable for applications requiring higher data throughput.

CAT25020HU4I-GT3 (onsemi)

This onsemi-manufactured substitute provides equivalent 2Kbit SPI EEPROM functionality with 10 MHz clock frequency matching the original specification. The 8-UDFN-EP package is mechanically compatible. Supply voltage range extends to 1.8V minimum. MSL 1 rating provides unlimited moisture sensitivity tolerance. This part is suitable for direct replacement in applications where manufacturer diversity is required.

M95020-DRMF3TG/K (STMicroelectronics)

This STMicroelectronics substitute offers 20 MHz clock frequency with 4ms write cycle time, both superior to the original specification. The extended operating temperature range (-40°C to 125°C) and 1.8V minimum supply voltage provide additional design margin. AEC-Q100 automotive qualification and 8-MLP package designation indicate suitability for automotive and industrial applications. MSL 1 rating ensures unlimited moisture tolerance.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a higher clock frequency than the original 25LC020AT-I/MC?

A: Yes. Parts with equal or greater clock frequency (10 MHz or higher) are functionally compatible. Higher frequency capability does not degrade performance in applications designed for 10 MHz operation. The AT25020B-MAHL-T (20 MHz) and M95020-DRMF3TG/K (20 MHz) are valid substitutes in this regard.

Q: Are package form factor differences between DFN, UDFN, and MLP significant for substitution?

A: All substitute parts maintain the 8-pin configuration with 2x3mm footprint dimensions. DFN, UDFN, and MLP are functionally equivalent package variants. PCB layout and reflow profile compatibility should be verified with the specific package datasheet, but electrical and functional substitution is valid.

Q: What is the significance of the MSL 3 rating on the AT25020B-MAHL-T?

A: MSL 3 indicates a 168-hour moisture absorption limit after package opening. This part requires controlled storage and handling procedures. For applications with standard moisture control practices, this is acceptable. MSL 1 parts (25LC020AT-E/MC, CAT25020HU4I-GT3, M95020-DRMF3TG/K) offer unlimited moisture tolerance and are preferred for environments with less stringent moisture control.

Q: Is the extended operating temperature range of 25LC020AT-E/MC and M95020-DRMF3TG/K necessary for my application?

A: The extended range (-40°C to 125°C versus -40°C to 85°C) provides additional thermal margin but is not required if your application operates within -40°C to 85°C. Selection should be based on actual system thermal requirements and cost considerations.

Q: Can I substitute the 25LC020AT-I/MC with the M95020-DRMF3TG/K in a non-automotive application?

A: Yes. The AEC-Q100 automotive qualification of the M95020-DRMF3TG/K indicates enhanced reliability testing and is acceptable for non-automotive applications. The part meets all functional and electrical requirements for direct substitution.

Q: What are the key differences between the Microchip 25LC020AT-E/MC and the onsemi CAT25020HU4I-GT3?

A: Both parts maintain identical 2Kbit SPI EEPROM specifications and 10 MHz clock frequency. The primary differences are manufacturer (Microchip versus onsemi) and package designation (8-DFN versus 8-UDFN-EP). Electrical and functional compatibility is complete. Selection may be based on supply chain availability or manufacturer preference.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message