25LC020A-E/ST EEPROM Memory IC Equivalent & Substitute Parts

Part Overview

The 25LC020A-E/ST is a 2Kbit Serial Peripheral Interface (SPI) EEPROM memory IC manufactured by Microchip Technology. This non-volatile memory device operates at 10 MHz clock frequency with a supply voltage range of 2.5V to 5.5V and is housed in an 8-TSSOP surface mount package. The part is currently in active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative manufacturers' components offer improved specifications, or when design requirements necessitate enhanced performance characteristics such as higher clock frequency or extended temperature ranges.

Key Parameters

Parameter	Value
Memory Size	2Kbit
Memory Organization	256 x 8
Memory Interface	SPI
Clock Frequency	10 MHz
Supply Voltage Range	2.5V ~ 5.5V
Operating Temperature	-40°C ~ 125°C
Write Cycle Time	5ms
Package Type	8-TSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution compatibility for the 25LC020A-E/ST is determined by the following critical parameters: 2Kbit memory capacity, 256 x 8 memory organization, SPI interface protocol, 8-TSSOP package footprint, and surface mount mounting type. All substitute parts listed maintain these core specifications.

Secondary parameters that may vary between the main part and substitutes include clock frequency (10 MHz to 20 MHz), supply voltage range (2.5V ~ 5.5V or 1.8V ~ 5.5V), operating temperature range (-40°C ~ 125°C or -40°C ~ 85°C), write cycle time (4ms to 5ms), and automotive qualification status (AEC-Q100).

Substitutes are grouped into two categories: direct functional equivalents with identical or superior clock frequency specifications, and enhanced-performance alternatives offering higher clock speeds or extended automotive qualification.

Parameter Comparison

Part Number	Manufacturer	Memory Size	Clock Frequency	Supply Voltage	Operating Temperature	Write Cycle Time	Package	Product Status	Automotive Grade
25LC020A-E/ST	Microchip Technology	2Kbit	10 MHz	2.5V ~ 5.5V	-40°C ~ 125°C	5ms	8-TSSOP	Active	No
AT25020B-XHL-B	Microchip Technology	2Kbit	20 MHz	1.8V ~ 5.5V	-40°C ~ 85°C	5ms	8-TSSOP	Active	No
BR25H020FVT-2CE2	Rohm Semiconductor	2Kbit	10 MHz	2.5V ~ 5.5V	-40°C ~ 125°C	4ms	8-TSSOP	Active	Yes (AEC-Q100)
CAT25020YI-GT3	onsemi	2Kbit	20 MHz	1.8V ~ 5.5V	-40°C ~ 85°C	5ms	8-TSSOP	Active	No
CAV25020YE-GT3	onsemi	2Kbit	10 MHz	2.5V ~ 5.5V	-40°C ~ 125°C	5ms	8-TSSOP	Active	Yes (AEC-Q100)
M95020-DRDW3TP/K	STMicroelectronics	2Kbit	20 MHz	1.8V ~ 5.5V	-40°C ~ 125°C	4ms	8-TSSOP	Active	Yes (AEC-Q100)
M95020-RDW6TP	STMicroelectronics	2Kbit	20 MHz	1.8V ~ 5.5V	-40°C ~ 85°C	5ms	8-TSSOP	Active	No
M95020-WDW6TP	STMicroelectronics	2Kbit	20 MHz	2.5V ~ 5.5V	-40°C ~ 85°C	5ms	8-TSSOP	Active	No

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance, ensuring long-term availability and regulatory conformance equivalent to the 25LC020A-E/ST.

For applications requiring automotive-grade qualification (AEC-Q100), select BR25H020FVT-2CE2, CAV25020YE-GT3, or M95020-DRDW3TP/K. These parts satisfy automotive reliability standards while maintaining core memory specifications.

For applications requiring extended operating temperature range (-40°C ~ 125°C), select BR25H020FVT-2CE2, CAV25020YE-GT3, or M95020-DRDW3TP/K. These parts match or exceed the original part's temperature specification.

For applications requiring higher clock frequency (20 MHz), select AT25020B-XHL-B, CAT25020YI-GT3, M95020-DRDW3TP/K, M95020-RDW6TP, or M95020-WDW6TP. These parts provide doubled clock frequency while maintaining SPI interface compatibility.

For applications with reduced supply voltage requirements (1.8V minimum), select AT25020B-XHL-B, CAT25020YI-GT3, M95020-DRDW3TP/K, or M95020-RDW6TP.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with 20 MHz clock frequency in place of the 10 MHz 25LC020A-E/ST?

A: Yes. Higher clock frequency parts are backward compatible with lower frequency applications. The SPI interface protocol remains identical, and the device will operate correctly at reduced clock speeds.

Q: What is the difference between the 8-TSSOP and 8-TSSOP-B package designations?

A: Both designations refer to the same 8-pin Thin Shrink Small Outline Package with identical 0.173" width and 4.40mm dimensions. The "-B" suffix indicates a variant designation from the manufacturer but maintains footprint compatibility.

Q: Are all substitute parts pin-compatible with the 25LC020A-E/ST?

A: Yes. All listed substitute parts use the 8-TSSOP package with identical pin configuration and SPI interface pinout, ensuring direct PCB footprint compatibility.

Q: Which substitute part offers the best performance upgrade?

A: M95020-DRDW3TP/K provides the most comprehensive performance enhancement, combining 20 MHz clock frequency, extended temperature range (-40°C ~ 125°C), automotive qualification (AEC-Q100), and reduced write cycle time (4ms).

Q: Can I use a part rated for 1.8V minimum supply voltage in a 2.5V system?

A: Yes. Parts with 1.8V ~ 5.5V supply range are fully compatible with systems operating at 2.5V or higher. The wider voltage range provides additional design flexibility.

Q: What does ROHS3 compliance mean for this component?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All listed parts maintain this compliance standard.

Q: Are automotive-grade parts (AEC-Q100) required for non-automotive applications?

A: No. Automotive-grade qualification is optional for non-automotive applications. Standard parts provide equivalent functionality; automotive qualification adds reliability testing and traceability requirements specific to automotive industry standards.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message