Equivalent & Substitute Parts for 25BSP22-G-4-16F

Part Overview

The 25BSP22-G-4-16F is a mechanical rotary encoder manufactured by Grayhill Inc., classified within the Series 25 product line. This component generates 16 pulses per revolution using Gray Code (Absolute) output format and features a right-angle orientation with PCB through-hole mounting. The part is currently in active product status with 924 units available in inventory. Alternative equivalent parts are necessary when specific packaging requirements, compliance certifications, or inventory constraints necessitate component substitution while maintaining functional compatibility.

Substiute Parts

25BSP22-G-4-16F

Grayhill Inc.In Stock: 102425BSP22-G-4-16F Datasheet

Current PartRFQ

25BSP22-G-1-08

Grayhill Inc.In Stock: 104825BSP22-G-1-08 Datasheet

SimilarRFQ

25BSR22-G-1-16C

Grayhill Inc.In Stock: 122325BSR22-G-1-16C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 25BSP22-G-4-16F is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Encoder Type: Mechanical
• Output Type: Gray Code (Absolute)
• Pulses per Revolution: 16
• Actuator Type: 1/4" Dia Flatted End
• Mounting Type: PCB, Through Hole
• Orientation: Right Angle
• Termination Style: PC Pin
• Rotational Life: 50K cycles minimum
• Detent: No
• Built in Switch: No
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute parts 25BSP22-G-1-08 and 25BSR22-G-1-16C satisfy all mandatory matching parameters. Variations in packaging format (Bulk versus other configurations) and RoHS certification revision levels (RoHS3 Compliant versus RoHS Compliant) do not affect functional substitution capability.

Parameter Comparison

Engineering Selection Recommendations

All three parts—25BSP22-G-4-16F, 25BSP22-G-1-08, and 25BSR22-G-1-16C—maintain active product status and comply with RoHS and REACH regulatory requirements. The substitute parts 25BSP22-G-1-08 and 25BSR22-G-1-16C carry ROHS3 Compliant certification, representing the current RoHS revision standard. Selection between these parts should be based on packaging availability, inventory levels, and specific procurement requirements rather than functional performance, as all three components are electrically and mechanically equivalent for the specified application parameters.

Frequently Asked Questions (FAQ)

Q: Can 25BSP22-G-1-08 directly replace 25BSP22-G-4-16F in an existing design?

A: Yes. Both parts share identical functional parameters including encoder type, output format (Gray Code Absolute), 16 pulses per revolution, actuator geometry, mounting configuration, and rotational life specification. The parts are functionally interchangeable.

Q: What is the difference between 25BSP22-G-4-16F and 25BSR22-G-1-16C?

A: The primary difference is the base product number designation (25BSP22 versus 25BSR22). All other electrical and mechanical parameters are identical. Both parts are mechanically compatible and functionally equivalent.

Q: Does packaging format affect substitution compatibility?

A: Packaging format (Bulk versus other configurations) does not affect functional substitution. Packaging differences relate to supply chain and inventory management only, not component performance or compatibility.

Q: Are there compliance differences between the substitute parts?

A: The main part carries RoHS Compliant certification, while both substitute parts carry ROHS3 Compliant certification. ROHS3 represents the current RoHS revision. Both compliance levels satisfy RoHS regulatory requirements. REACH status is identical across all three parts (REACH Unaffected).

Q: Which substitute part should be selected if inventory is a consideration?

A: 25BSR22-G-1-16C has the highest inventory level at 1188 units, followed by 25BSP22-G-1-08 at 1018 units. Selection should align with procurement lead time and supply chain requirements.