Equivalent & Substitute Parts for 25BSP22-G-2-10

Part Overview

The 25BSP22-G-2-10 is a mechanical rotary encoder manufactured by Grayhill Inc., configured with 16 pulses per revolution in Gray Code (Absolute) output format. This component operates in a right-angle orientation with a 1/4" diameter flatted end actuator and PCB through-hole mounting. The encoder is classified as Active product status with full RoHS and REACH compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct functional replacement in circuit designs.

Substiute Parts

25BSP22-G-2-10

Grayhill Inc.In Stock: 95325BSP22-G-2-10 Datasheet

Current PartRFQ

25BSP22-G-1-08

Grayhill Inc.In Stock: 104825BSP22-G-1-08 Datasheet

SimilarRFQ

25BSR22-G-1-16C

Grayhill Inc.In Stock: 122325BSR22-G-1-16C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 25BSP22-G-2-10 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Encoder Type: Mechanical
• Output Type: Gray Code (Absolute)
• Pulses per Revolution: 16
• Actuator Type: 1/4" Dia Flatted End
• Mounting Type: PCB, Through Hole
• Orientation: Right Angle
• Termination Style: PC Pin
• Rotational Life (Cycles Min): 50K
• Detent: No
• Built in Switch: No

Compliance Parameters:

• RoHS Status: RoHS Compliant or higher revision
• REACH Status: REACH Unaffected
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The identified substitute parts 25BSP22-G-1-08 and 25BSR22-G-1-16C satisfy all mandatory electrical and mechanical parameters. Variations in packaging format and RoHS revision level do not affect functional substitution capability.

Parameter Comparison

Engineering Selection Recommendations

All three parts—25BSP22-G-2-10, 25BSP22-G-1-08, and 25BSR22-G-1-16C—maintain Active product status and full regulatory compliance. The substitute parts carry ROHS3 Compliant certification, which represents a higher compliance revision than the main part's RoHS Compliant status. Both substitute options are functionally equivalent for applications requiring 16 PPR mechanical Gray Code absolute encoders with right-angle PCB through-hole mounting.

Selection between the main part and substitutes should be based on packaging requirements and inventory availability. The 25BSP22-G-2-10 is supplied in standard packaging, while both substitutes are available in Bulk packaging format. All parts share identical electrical and mechanical specifications, ensuring direct interchangeability in circuit design.

Frequently Asked Questions (FAQ)

Q: Can 25BSP22-G-1-08 replace 25BSP22-G-2-10 in existing designs?

A: Yes. Both parts share identical encoder type, output format, pulse resolution, actuator geometry, mounting configuration, and termination style. The difference in packaging format does not affect functional performance.

Q: What is the significance of the ROHS3 Compliant status on substitute parts?

A: ROHS3 Compliant represents a current revision of RoHS compliance standards. Parts with ROHS3 Compliant status meet or exceed the requirements of RoHS Compliant parts and are suitable for direct substitution.

Q: Are there differences between 25BSP22-G-1-08 and 25BSR22-G-1-16C?

A: Both parts meet all mandatory electrical and mechanical parameters for substitution. The primary difference is the base product number designation (25BSP22 versus 25BSR22), which does not affect functional equivalence for this application.

Q: What parameters must remain constant for substitution?

A: Encoder type, output type, pulses per revolution, actuator type, mounting type, orientation, termination style, rotational life rating, detent status, and built-in switch status must all remain constant. Packaging format and RoHS revision level do not restrict substitution.

Q: Is supply voltage a consideration for substitution?

A: No supply voltage specification is provided for any of these parts. Substitution decisions are based solely on the mechanical and electrical parameters listed in the provided specifications.