WAGO 256-746 Equivalent & Substitute Parts

Part Overview

The WAGO 256-746 is a 1 Position Wire to Board Terminal Block with 45° (135°) angle orientation and board through hole mounting. This stackable PCB terminal block features screwless push button clamp wire termination and is designed for applications requiring secure wire-to-board connections with push button actuation. The component is Active product status and maintains full RoHS3 compliance. Substitute parts are identified when equivalent functional performance is required due to inventory constraints, application-specific requirements, or design flexibility needs while maintaining critical electrical and mechanical parameters.

Substiute Parts

256-746

WAGO CorporationIn Stock: 1092256-746 Datasheet

Current PartRFQ

1706714

Phoenix ContactIn Stock: 76171706714 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the WAGO 256-746 terminal block is determined by alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 1 Position
• Mating Orientation: 45° (135°) Angle with Board
• Mounting Type: Through Hole
• Voltage Rating: 300 V
• Wire Termination Type: Screwless clamp mechanism

Allowable Parameter Variations:

• Current Rating: Substitute must meet or exceed the application requirement (minimum 10 A for the identified substitute)
• Wire Gauge: Substitute wire gauge range must accommodate the application wire sizes (14-24 AWG minimum acceptable)
• Operating Temperature: Substitute must support the required operating range
• Housing Material: Polyamide or equivalent thermoplastic materials acceptable
• Compliance: RoHS3 compliance required

The Phoenix Contact 1706714 qualifies as a substitute based on matching the mandatory parameters while operating within acceptable current and wire gauge tolerances for applications not requiring the full 15 A capacity or extended 12 AWG wire support of the primary part.

Parameter Comparison

Engineering Selection Recommendations

WAGO 256-746 Primary Selection: Select the WAGO 256-746 for applications requiring the full 15 A current capacity and extended wire gauge support (12-28 AWG). This part is recommended for designs utilizing 12 or 13 AWG conductors or applications with current demands approaching 15 A. The push button clamp termination mechanism provides the specified actuation feature. Active product status ensures continued availability and supply chain stability.

Phoenix Contact 1706714 Substitute Selection: The Phoenix Contact 1706714 serves as a functional substitute for applications with current requirements not exceeding 10 A and wire gauges within the 14-24 AWG range. This substitute maintains identical voltage rating, mating orientation, mounting type, and through hole configuration. Both parts achieve RoHS3 compliance and active product status. The spring cage tension clamp termination mechanism differs from the push button design but provides equivalent screwless wire retention.

Compliance and Certification: Both parts maintain ROHS3 compliance, Moisture Sensitivity Level 1 (Unlimited), REACH Unaffected status, and EAR99 ECCN classification. Selection between primary and substitute parts does not compromise regulatory or environmental compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1706714 replace the WAGO 256-746 in all applications?

A: The Phoenix Contact 1706714 is suitable for applications where current requirements do not exceed 10 A and wire gauges fall within 14-24 AWG. Applications requiring 12 or 13 AWG wire support or currents approaching 15 A must use the WAGO 256-746.

Q: What is the primary difference in wire termination between these parts?

A: The WAGO 256-746 uses push button clamp termination, while the Phoenix Contact 1706714 uses spring cage tension clamp termination. Both are screwless mechanisms providing secure wire retention without screw fastening.

Q: Are both parts suitable for the same voltage applications?

A: Yes. Both the WAGO 256-746 and Phoenix Contact 1706714 are rated for 300 V operation and are suitable for identical voltage applications.

Q: What is the difference in packaging between these parts?

A: The WAGO 256-746 is supplied in Box packaging, while the Phoenix Contact 1706714 is supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: Do both parts support the same operating temperature range?

A: The WAGO 256-746 operates from -60°C to 105°C. Operating temperature data for the Phoenix Contact 1706714 was not provided in the specification parameters. Verify temperature requirements for the specific application before substitution.

Q: Are both parts through hole mounted?

A: Yes. Both the WAGO 256-746 and Phoenix Contact 1706714 feature through hole mounting with 45° (135°) angle board orientation.

Q: Can these parts be used interchangeably on the same PCB?

A: Physical and electrical compatibility exists for applications within the Phoenix Contact 1706714 parameter limits (≤10 A, 14-24 AWG wire gauge). PCB layout and hole positioning must accommodate the specific part geometry. Verify mechanical fit and termination mechanism compatibility with the application design.