24VL014H/P EEPROM Memory IC Equivalent & Substitute Parts

Part Overview

The 24VL014H/P is a 1Kbit EEPROM memory integrated circuit manufactured by Microchip Technology, designed for I2C serial communication applications operating at 400 kHz. This non-volatile memory device is housed in an 8-DIP through-hole package and supports supply voltages from 1.5V to 3.6V across an operating temperature range of -20°C to 85°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when electrical parameters, memory specifications, interface protocols, and physical packaging remain identical across alternative part numbers from the same manufacturer.

Substiute Parts

24VL014H/P

Microchip TechnologyIn Stock: 101924VL014H/P Datasheet

Current PartRFQ

24VL014/P

Microchip TechnologyIn Stock: 241524VL014/P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The 24VL014/P qualifies as a parametric equivalent to the 24VL014H/P based on strict alignment across all critical electrical and mechanical parameters. Substitution validity is determined by matching the following criteria:

• Memory capacity and organization (1Kbit, 128 x 8 configuration)
• Serial communication protocol (I2C at 400 kHz)
• Timing specifications (900 ns access time, 5 ms write cycle)
• Supply voltage range (1.5V ~ 3.6V)
• Operating temperature range (-20°C ~ 85°C)
• Physical package (8-DIP through-hole, 0.300" pitch)
• Regulatory compliance (RoHS3, REACH Unaffected, EAR99)

Both parts are manufactured by Microchip Technology and share the base product number 24VL014, with packaging designation as the only distinguishing factor between part numbers.

Parameter Comparison

Engineering Selection Recommendations

Both the 24VL014H/P and 24VL014/P maintain Active product status with full regulatory compliance under RoHS3 and REACH Unaffected classifications. Selection between these parts should be based on availability and supply chain requirements rather than technical performance, as all electrical, timing, and mechanical specifications are identical. The 24VL014/P currently maintains higher inventory availability (2398 pcs) compared to the 24VL014H/P (962 pcs), making it suitable for high-volume production requirements. Both parts are suitable for I2C-based EEPROM applications requiring 1Kbit non-volatile storage in through-hole 8-DIP packages across the specified voltage and temperature ranges.

Frequently Asked Questions (FAQ)

Q: Can 24VL014/P be used as a direct replacement for 24VL014H/P?

A: Yes. Both parts are electrically and mechanically identical, with matching memory capacity, I2C interface specifications, timing parameters, supply voltage range, operating temperature range, and 8-DIP through-hole packaging. No circuit modifications are required.

Q: What is the difference between 24VL014H/P and 24VL014/P?

A: The parts differ only in packaging designation (H versus standard). All functional and electrical specifications are identical. Both are manufactured by Microchip Technology under the base product number 24VL014.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical RoHS3 compliance, REACH Unaffected status, and EAR99 ECCN classification. Moisture sensitivity level is 1 (Unlimited) for both.

Q: What are the critical parameters for I2C EEPROM substitution?

A: Memory capacity (1Kbit), organization (128 x 8), interface protocol (I2C 400 kHz), access time (900 ns), write cycle time (5 ms), supply voltage range (1.5V ~ 3.6V), operating temperature (-20°C ~ 85°C), and physical package (8-DIP through-hole) must all match for direct substitution.

Q: Can these parts be used in new designs?

A: Yes. Both parts maintain Active product status, indicating ongoing manufacturer support and availability for new design implementations.