Equivalent & Substitute Parts for Honeywell 24PCBFD6G Pressure Sensor

Part Overview

The Honeywell 24PCBFD6G is a compound pressure sensor designed for board mount applications. This sensor operates within a ±5PSI (±34.47kPa) range and delivers output signals through a Wheatstone Bridge configuration. The device is currently in Active product status with 1034 units available in stock.

Substitute parts become necessary when the primary component reaches end-of-life status, experiences supply constraints, or when design flexibility permits selection from equivalent alternatives within the same product family. The 24PCBND6G represents a parametric equivalent that shares identical electrical and mechanical specifications with the primary part.

Substiute Parts

24PCBFD6G

Honeywell Sensing and Productivity SolutionsIn Stock: 105324PCBFD6G Datasheet

Current PartRFQ

24PCBND6G

Honeywell Sensing and Productivity SolutionsIn Stock: 72424PCBND6G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 24PCBFD6G is determined by strict parametric matching across the following critical criteria:

Electrical Parameters:

• Pressure measurement range: ±5PSI (±34.47kPa)
• Output configuration: Wheatstone Bridge
• Output signal range: 0 mV ~ 115 mV (10V)
• Accuracy specification: ±1%
• Supply voltage requirement: 10V ~ 12V

Mechanical Parameters:

• Package type: 4-SIP Module
• Termination: PC Pin
• Mounting method: Through Hole
• Port configuration: No Port

Compliance & Environmental:

• RoHS Compliance: Required
• Moisture Sensitivity Level: 1 (Unlimited)
• Operating temperature range: -40°C ~ 85°C

The 24PCBND6G meets all specified parameters and qualifies as a parametric equivalent. The primary distinction between these parts is product status: the 24PCBFD6G maintains Active status while the 24PCBND6G is classified as Obsolete.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: 24PCBFD6G

The 24PCBFD6G is the recommended choice for new designs and ongoing production. This part maintains Active product status with Honeywell Sensing and Productivity Solutions, ensuring long-term availability and continued manufacturer support. Current inventory of 1034 units supports immediate procurement requirements. The part carries full RoHS compliance certification and MSL Level 1 rating, meeting modern environmental and reliability standards.

Alternative Selection: 24PCBND6G

The 24PCBND6G qualifies as a parametric equivalent for applications where the primary part becomes unavailable. This substitute maintains identical electrical performance, mechanical compatibility, and environmental compliance. However, the Obsolete product status indicates this part is no longer in active production. Selection of the 24PCBND6G should be limited to situations where existing inventory is available and supply chain continuity is confirmed. Current inventory of 615 units is available but represents a finite supply.

Compliance Considerations

Both parts satisfy RoHS compliance requirements and carry MSL Level 1 ratings, indicating compatibility with standard manufacturing and storage conditions without moisture sensitivity constraints.

Frequently Asked Questions (FAQ)

Q: Can the 24PCBND6G directly replace the 24PCBFD6G in existing designs?

A: Yes. The 24PCBND6G is a parametric equivalent with identical electrical specifications, output characteristics, accuracy, supply voltage requirements, and mechanical package configuration. Direct substitution is electrically and mechanically compatible.

Q: What is the primary difference between these two parts?

A: The 24PCBFD6G maintains Active product status with ongoing manufacturer support, while the 24PCBND6G is classified as Obsolete. Both parts share identical technical specifications and performance parameters.

Q: Are there any temperature or environmental differences between these sensors?

A: No. Both parts operate across the identical temperature range of -40°C to 85°C and carry the same MSL Level 1 rating, indicating equivalent environmental performance and storage requirements.

Q: Will the 24PCBND6G work with the same PCB layout and connector configuration?

A: Yes. Both parts use identical 4-SIP Module packaging with PC Pin termination and Through Hole mounting. PCB layouts, footprints, and connector configurations are fully compatible.

Q: Which part should be specified for new product designs?

A: The 24PCBFD6G should be specified for new designs due to its Active product status and assured long-term availability. The 24PCBND6G should be reserved for legacy system support or when primary part availability is constrained.

Q: Are both parts RoHS compliant?

A: Yes. Both the 24PCBFD6G and 24PCBND6G carry full RoHS compliance certification, meeting environmental and regulatory requirements for modern electronics manufacturing.

Q: What is the output signal compatibility between these sensors?

A: Both sensors deliver identical Wheatstone Bridge output in the range of 0 mV to 115 mV at 10V supply, ensuring signal processing and conditioning circuits require no modification between parts.