24FD3760-F Film Capacitor Equivalent & Substitute Parts

Part Overview

The 24FD3760-F is a 60 µF film capacitor rated for 370V AC operation, manufactured by Cornell Dubilier Electronics (CDE) in the MPF series. This component is designed for motor run and power factor correction (PFC) applications and features a polypropylene (PP) metallized dielectric in a radial, can-style package with quick connect/disconnect termination.

The 24FD3760-F is classified as obsolete. Substitute parts are necessary to maintain system functionality and ensure continued availability for replacement and new production applications. Two direct substitutes are available from the same manufacturer, both with active product status and equivalent electrical specifications.

Substiute Parts

24FD3760-F

Cornell Dubilier Electronics (CDE)In Stock: 105324FD3760-F Datasheet

Current PartRFQ

24FD3760A-F

Cornell Dubilier Electronics (CDE)In Stock: 113424FD3760A-F Datasheet

DirectRFQ

SFT37T60K291B-F

Cornell Dubilier Electronics (CDE)In Stock: 889SFT37T60K291B-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 24FD3760-F is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match Exactly):

• Capacitance: 60 µF
• Tolerance: ±10%
• Voltage Rating (AC): 370V
• Dielectric Material: Polypropylene (PP), Metallized

Mechanical Parameters (Must Match or Be Compatible):

• Package Type: Radial, Can
• Mounting Type: Chassis Mount, Requires Holder/Bracket
• Termination: Quick Connect, Disconnect
• Lead Spacing: 0.810" to 0.813" (20.57mm to 20.64mm)

Environmental & Compliance Parameters:

• Operating Temperature Range: -40°C to 70°C
• RoHS Status: ROHS3 Compliant

Both substitute parts (24FD3760A-F and SFT37T60K291B-F) meet all electrical requirements and are mechanically compatible within dimensional tolerances. Physical dimensions vary slightly between models but remain within acceptable limits for chassis-mounted applications using standard holder/bracket assemblies.

Parameter Comparison

Engineering Selection Recommendations

24FD3760A-F is the primary substitute for the obsolete 24FD3760-F. Both parts belong to the same MPF series and share identical electrical specifications and lead spacing. The 24FD3760A-F maintains active product status with higher inventory availability (1072 pcs vs. 1003 pcs for the main part). Physical dimensions are identical to the main part, ensuring direct mechanical compatibility in existing designs. ROHS3 compliance and MSL rating of 1 (Unlimited) are maintained. REACH Unaffected status is confirmed.

SFT37T60K291B-F is an alternative substitute from the SF series. This part meets all electrical requirements and is mechanically compatible within dimensional tolerances. The SFT37T60K291B-F features a slightly more compact form factor with reduced height (3.030" vs. 3.250"), which may be advantageous in space-constrained applications. Lead spacing tolerance of 0.810" (20.57mm) is within acceptable limits for standard holder/bracket assemblies. ROHS3 compliance is maintained. MSL rating is not applicable for this series. REACH Unaffected status is confirmed.

Both substitutes are manufactured by Cornell Dubilier Electronics and carry active product status, ensuring long-term availability and supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the 24FD3760A-F be used as a direct replacement for the 24FD3760-F?

A: Yes. The 24FD3760A-F is electrically and mechanically equivalent to the 24FD3760-F. Both parts have identical capacitance (60 µF), voltage rating (370V AC), tolerance (±10%), dielectric material (polypropylene metallized), lead spacing (0.813"), and diameter (2.625"). Physical dimensions are identical, ensuring compatibility with existing holder/bracket assemblies.

Q: What is the difference between the 24FD3760A-F and SFT37T60K291B-F?

A: Both parts are electrically equivalent with identical capacitance, voltage rating, tolerance, and dielectric material. The primary differences are series designation (MPF vs. SF) and physical dimensions. The SFT37T60K291B-F is more compact with a maximum seated height of 3.030" compared to 3.160" for the 24FD3760A-F. Lead spacing differs slightly (0.810" vs. 0.813"), but both are compatible with standard quick connect/disconnect termination systems.

Q: Are all three parts RoHS compliant?

A: Yes. The 24FD3760-F, 24FD3760A-F, and SFT37T60K291B-F are all ROHS3 compliant.

Q: What is the operating temperature range for these capacitors?

A: All three parts operate within the temperature range of -40°C to 70°C.

Q: Can these capacitors be used in motor run and power factor correction applications?

A: Yes. The 24FD3760-F and 24FD3760A-F are specified for motor run and power factor correction (PFC) applications. The SFT37T60K291B-F is specified for motor run applications.

Q: What mounting configuration is required for these capacitors?

A: All three parts are chassis-mounted components that require a holder/bracket assembly. They feature quick connect/disconnect termination for secure installation.

Q: Are there inventory considerations when selecting a substitute?

A: The 24FD3760A-F has higher inventory availability (1072 pcs) compared to the main part (1003 pcs). The SFT37T60K291B-F has 818 pcs in stock. All three parts are listed as new original stock.

Q: What is the lead spacing for each part?

A: The 24FD3760-F and 24FD3760A-F both have lead spacing of 0.813" (20.64mm). The SFT37T60K291B-F has lead spacing of 0.810" (20.57mm). These differences are within acceptable tolerances for standard holder/bracket systems.