24FC04HT-E/ST EEPROM Memory IC Equivalent & Substitute Parts

Part Overview

The 24FC04HT-E/ST is a 4Kbit I2C EEPROM memory IC manufactured by Microchip Technology, designed for non-volatile data storage applications requiring serial communication. This device operates at 1 MHz clock frequency with 450 ns access time and supports a wide supply voltage range of 1.7V to 5.5V. The part is actively produced and available in 8-TSSOP surface mount packaging. Equivalent substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across manufacturers, ensuring direct interchangeability in circuit designs.

Substiute Parts

24FC04HT-E/ST
Microchip TechnologyIn Stock: 67224FC04HT-E/ST Datasheet
24FC04HT-E/ST
Current Part
M24C04-DRDW3TP/K
STMicroelectronicsIn Stock: 3024M24C04-DRDW3TP/K Datasheet
M24C04-DRDW3TP/K
Parametric Equivalent
NV24C04DTVLT3G
onsemiIn Stock: 3863NV24C04DTVLT3G Datasheet
NV24C04DTVLT3G
Parametric Equivalent

Key Parameters

Parameter Value
Memory Size 4Kbit
Memory Format EEPROM
Memory Interface I2C
Clock Frequency 1 MHz
Access Time 450 ns
Voltage Supply Range 1.7V ~ 5.5V
Operating Temperature -40°C ~ 125°C
Package Type 8-TSSOP (0.173", 4.40mm Width)
Mounting Type Surface Mount
RoHS Status ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the 24FC04HT-E/ST are qualified based on the following critical parameters that determine functional and mechanical interchangeability:

Electrical Compatibility Criteria:

  • Memory capacity: 4Kbit
  • Memory type: EEPROM (non-volatile)
  • Interface protocol: I2C serial communication
  • Clock frequency: 1 MHz
  • Access time: 450 ns
  • Supply voltage range: 1.7V ~ 5.5V
  • Operating temperature range: -40°C ~ 125°C

Mechanical Compatibility Criteria:

  • Package type: 8-TSSOP
  • Package dimensions: 0.173" × 4.40mm width
  • Mounting type: Surface Mount

The identified substitute parts meet all specified electrical and mechanical parameters, enabling direct replacement in existing circuit designs without modification to PCB layout or firmware.

Parameter Comparison

Parameter 24FC04HT-E/ST (Microchip) M24C04-DRDW3TP/K (STMicroelectronics) NV24C04DTVLT3G (onsemi)
Memory Size 4Kbit 4Kbit 4Kbit
Memory Format EEPROM EEPROM EEPROM
Memory Interface I2C I2C I2C
Clock Frequency 1 MHz 1 MHz 1 MHz
Access Time 450 ns 450 ns 450 ns
Voltage Supply Range 1.7V ~ 5.5V 1.7V ~ 5.5V 1.7V ~ 5.5V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C -40°C ~ 125°C
Package Type 8-TSSOP 8-TSSOP 8-TSSOP
Package Dimensions 0.173" × 4.40mm 0.173" × 4.40mm 0.173" × 4.40mm
Mounting Type Surface Mount Surface Mount Surface Mount
RoHS Status ROHS3 Compliant ROHS3 Compliant ROHS3 Compliant
Product Status Active Active Active

Engineering Selection Recommendations

All three parts maintain active production status and full ROHS3 compliance. The M24C04-DRDW3TP/K and NV24C04DTVLT3G substitute parts carry AEC-Q100 automotive qualification, providing additional reliability assurance for applications requiring automotive-grade components. The 24FC04HT-E/ST remains suitable for general industrial and consumer applications. Selection between these parts should be based on supply chain availability, packaging format preference (Tape & Reel versus Cut Tape & Digi-Reel), and any specific automotive qualification requirements of the end application.

Frequently Asked Questions (FAQ)

Q: Can M24C04-DRDW3TP/K replace 24FC04HT-E/ST directly on the PCB?

A: Yes. Both parts share identical electrical specifications (4Kbit I2C EEPROM, 1 MHz, 450 ns access time, 1.7V–5.5V supply) and the same 8-TSSOP package footprint. No PCB modifications are required.

Q: What is the difference between the memory organization values (256 x 8 x 2 versus 512 x 8)?

A: Memory organization notation differs between manufacturers but represents the same 4Kbit capacity. Both configurations deliver identical functional performance in I2C EEPROM applications.

Q: Are the substitute parts suitable for automotive applications?

A: M24C04-DRDW3TP/K and NV24C04DTVLT3G carry AEC-Q100 automotive qualification. The 24FC04HT-E/ST does not list automotive qualification. For automotive designs, the qualified substitutes are preferred.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both are surface mount tape formats suitable for automated assembly. Tape & Reel is continuous reel packaging; Cut Tape & Digi-Reel is pre-cut tape on a reel. Selection depends on assembly equipment compatibility and order quantity requirements.

Q: Do all three parts have the same write cycle time?

A: The 24FC04HT-E/ST specifies 5ms write cycle time, while M24C04-DRDW3TP/K and NV24C04DTVLT3G specify 4ms. Both values are within acceptable margins for I2C EEPROM applications and do not affect functional interchangeability.

Q: Are moisture sensitivity levels identical across all three parts?

A: Yes. All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Request Quote (Ships tomorrow)