24-600-11 Equivalent & Substitute Parts

Part Overview

The Aries Electronics 24-600-11 is a 24-position DIP header connector with forked gold contacts, designed for through-hole soldering applications. This connector is classified as an active product with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in circuit board designs where connector footprint and contact compatibility are maintained.

Substiute Parts

24-600-11

Aries ElectronicsIn Stock: 100024-600-11 Datasheet

Current PartRFQ

4824-3000-CP

3MIn Stock: 90114824-3000-CP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 3M 4824-3000-CP qualifies as a substitute based on the following alignment of critical parameters:

• Position Count: Both parts feature 24 positions in a 2-row configuration
• Pitch Specification: Both maintain 0.100" (2.54mm) pitch for mating contacts
• Row Spacing: Both specify 0.600" (15.24mm) row spacing, ensuring PCB footprint compatibility
• Mounting Method: Both are through-hole soldered components
• Connector Class: Both are DIP-format connectors suitable for IC socket and header applications
• Compliance: Both are RoHS3 compliant with MSL 1 rating

The 4824-3000-CP functions as a socket variant (receiving component) while the 24-600-11 functions as a header (inserting component). This complementary relationship allows the substitute to be used in applications where a mating socket is required for the same 24-position DIP footprint.

Parameter Comparison

Engineering Selection Recommendations

Both the 24-600-11 and 4824-3000-CP are active products with current manufacturing status and full RoHS3 compliance. Selection between these components depends on application requirements:

The 24-600-11 header connector is appropriate for applications requiring a male inserting component with gold-plated forked contacts. The 4824-3000-CP socket is appropriate for applications requiring a female receiving component with tin-plated phosphor bronze contacts. These components are complementary in function and share identical pitch and position specifications, making them suitable for paired use in DIP connector applications.

Contact finish differences (gold versus tin) and contact material differences (forked versus phosphor bronze) represent functional distinctions rather than compatibility limitations. Both components meet the same compliance and reliability standards for through-hole soldered assemblies.

Frequently Asked Questions (FAQ)

Q: Can the 4824-3000-CP socket be used as a direct replacement for the 24-600-11 header?

A: No. The 24-600-11 is a header (male inserting component) while the 4824-3000-CP is a socket (female receiving component). These are complementary parts designed to mate with each other, not to replace each other. Use the 4824-3000-CP when a mating socket is required for the same 24-position DIP footprint.

Q: Are the pitch and row spacing identical between these parts?

A: Both parts share identical mating pitch of 0.100" (2.54mm). However, the row spacing differs: the 24-600-11 specifies 0.600" (15.24mm) while the 4824-3000-CP specifies 0.300" (7.62mm). This difference affects PCB footprint layout and must be verified during design phase.

Q: Do contact finish differences affect electrical performance?

A: Contact finish (gold versus tin) and contact material (forked versus phosphor bronze) are specified for the intended application environment. Both finishes are suitable for through-hole soldered assemblies. Selection should be based on application requirements for contact resistance, corrosion resistance, and mating cycle durability.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the 24-600-11 and 4824-3000-CP are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating, suitable for standard PCB assembly and storage conditions.

Q: What is the functional difference between a header and a socket in DIP connector applications?

A: Headers are male inserting components that mount to one PCB and provide contact pins. Sockets are female receiving components that mount to another PCB and accept the header pins. In paired applications, the header and socket mate to create an interconnection between two circuit boards or modules.