Amphenol CONEC 242A14160X D-Sub Connector Equivalent & Substitute Parts

Part Overview

The Amphenol CONEC 242A14160X is a 25-position D-Sub stacked connector featuring male pins and female socket receptacles in a through-hole, right-angle configuration. This connector is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design requirements and procurement needs. The part operates within a 100V rating at 7.5A maximum current and maintains operational capability across -25°C to 105°C temperature range.

Substiute Parts

242A14160X

Amphenol CONECIn Stock: 1226242A14160X Datasheet

Current PartRFQ

24-008883

Amphenol CONECIn Stock: 97024-008883 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 242A14160X is determined by strict alignment of electrical and mechanical parameters within the D-Sub connector category. The primary substitution criteria are:

Electrical Parameters:

• Voltage rating of 100V or greater
• Current rating of 7.5A or greater
• Contact material composition (Copper Alloy)
• Contact finish specification (Gold plating)

Mechanical Parameters:

• 25-position, 2-row configuration
• D-Sub stacked connector style
• Shell size 3 (DB, B) layout
• Through-hole, right-angle mounting orientation
• Solder termination method
• Housing/Shell flange with 4-40 specification

Environmental & Compliance Parameters:

• Operating temperature range of -25°C to 105°C or broader
• UL94 V-0 flammability rating
• IP20 ingress protection classification

The substitute part 24-008883 from Amphenol CONEC maintains these critical parameters while offering active product status and current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

Selection between the 242A14160X and substitute part 24-008883 is determined by product lifecycle and procurement requirements:

242A14160X Selection Criteria:

• Existing inventory of 1157 units supports short-term component availability
• Obsolete status indicates no future manufacturing or design updates
• Suitable for legacy system maintenance and repair applications where exact part matching is required
• Not recommended for new design implementations

24-008883 Selection Criteria:

• Active product status ensures ongoing manufacturing support and supply chain continuity
• Recommended for new designs and long-term production requirements
• Amphenol CONEC manufacturer continuity provides consistent quality and technical support
• Preferred for applications requiring extended component lifecycle and future availability assurance

For applications transitioning from obsolete to active components, verification of mechanical fit, electrical performance under specified load conditions, and PCB layout compatibility is necessary prior to production implementation.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the 242A14160X?

A: A valid substitute must maintain the 25-position, 2-row D-Sub stacked configuration with shell size 3 (DB, B), support 7.5A current at 100V minimum, utilize solder termination, and operate across -25°C to 105°C temperature range. The substitute must be manufactured by Amphenol CONEC to ensure design consistency and quality standards.

Q: Why is the 242A14160X classified as obsolete?

A: Obsolete classification indicates the manufacturer has discontinued production and no longer provides design updates, technical support, or guaranteed future availability. This status necessitates transition to active equivalent components for new designs and long-term production planning.

Q: Can the 24-008883 be used as a direct replacement in existing PCB designs?

A: Direct replacement compatibility depends on verification of mechanical dimensions, mounting hole spacing, pin configuration, and electrical performance under specified operating conditions. While both components are D-Sub stacked connectors from Amphenol CONEC, detailed dimensional and functional specifications for the 24-008883 must be confirmed against the original design requirements.

Q: What is the difference between "Position Connector" and the detailed connector type specification?

A: The 24-008883 is described as a "Position Connector" in the available data, which indicates a D-Sub connector with position-specific configuration. Complete technical specifications including exact pin count, row configuration, and contact type require consultation of the full component datasheet.

Q: Are there inventory considerations when transitioning from 242A14160X to 24-008883?

A: Current inventory shows 1157 units of 242A14160X and 948 units of 24-008883 in stock. For applications requiring immediate component availability, the 242A14160X inventory supports short-term needs. For production planning beyond current stock levels, the 24-008883 active status ensures replenishment capability.

Q: What certifications and compliance ratings apply to both components?

A: Both components meet UL94 V-0 flammability rating and IP20 ingress protection classification. Compliance with these standards ensures suitability for industrial and commercial applications requiring flame resistance and environmental protection specifications.