Ohmite 23JR13 Equivalent & Substitute Parts

Part Overview

The Ohmite 23JR13 is a 130 mOhms ±5% 3W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is currently in stock with 961 pieces available. Finding equivalent and substitute parts is necessary to ensure supply chain continuity, optimize procurement across different packaging formats, and maintain design flexibility for production environments.

Substiute Parts

23JR13

OhmiteIn Stock: 104823JR13 Datasheet

Current PartRFQ

23JR13E

OhmiteIn Stock: 116323JR13E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 23JR13 are determined by strict equivalence across the following critical parameters:

• Resistance value: 130 mOhms
• Tolerance: ±5%
• Power rating: 3W
• Composition: Wirewound
• Package configuration: Axial
• Physical dimensions: 0.220" Dia x 0.516" L (5.60mm x 13.10mm)
• Features: Flame Retardant Coating, Safety
• Number of terminations: 2

The substitute part 23JR13E maintains identical electrical and mechanical specifications while differing only in packaging format and compliance certifications. Both parts belong to the Ohmite Series 20 and are classified as Active products.

Parameter Comparison

Engineering Selection Recommendations

Both the 23JR13 and 23JR13E are Active products from Ohmite's Series 20 and provide identical electrical and mechanical performance for axial wirewound resistor applications requiring 130 mOhms at 3W with ±5% tolerance.

The primary distinction between these parts is compliance certification. The 23JR13E is ROHS3 compliant, while the 23JR13 is RoHS non-compliant. For applications subject to RoHS3 regulatory requirements, the 23JR13E is the appropriate selection. Both parts maintain REACH Unaffected status and EAR99 export classification.

Packaging format differs between the two parts: the 23JR13 is supplied in standard packaging, while the 23JR13E is supplied in bulk packaging. Selection between these formats depends on procurement and inventory management requirements rather than technical performance.

Frequently Asked Questions (FAQ)

Q: Are the 23JR13 and 23JR13E electrically identical?

A: Yes. Both parts have identical resistance (130 mOhms), tolerance (±5%), power rating (3W), composition (wirewound), and feature set (flame retardant coating, safety). They are functionally equivalent for circuit applications.

Q: What is the difference between these two part numbers?

A: The primary differences are RoHS compliance status and packaging format. The 23JR13E is ROHS3 compliant with bulk packaging, while the 23JR13 is RoHS non-compliant with standard packaging. Electrical and mechanical specifications are identical.

Q: Can I substitute the 23JR13E for the 23JR13 in my design?

A: Yes, provided your application does not have specific RoHS non-compliance requirements. The 23JR13E offers improved compliance status and is therefore suitable for most applications. Physical dimensions and mounting characteristics are identical.

Q: Does packaging format affect component performance?

A: No. Packaging format (standard versus bulk) affects only procurement, handling, and inventory management. Electrical and mechanical performance of the resistor itself remains unchanged.

Q: Are both parts currently available?

A: Yes. The 23JR13 has 961 pieces in stock, and the 23JR13E has 1117 pieces in stock, both listed as new original inventory.

Q: What are the physical dimensions of these resistors?

A: Both parts measure 0.220" diameter by 0.516" length (5.60mm x 13.10mm) in axial configuration with two terminations.