Ohmite 23JR10 Equivalent & Substitute Parts

Part Overview

The Ohmite 23JR10 is a 100 mOhms ±5% 3W through-hole axial wirewound resistor with flame retardant coating and safety features. This component is classified as Active product status and is currently in stock inventory. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when packaging requirements differ from standard configurations.

Substiute Parts

23JR10

OhmiteIn Stock: 76523JR10 Datasheet

Current PartRFQ

23JR10E

OhmiteIn Stock: 76123JR10E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Ohmite 23JR10 are qualified based on electrical and mechanical parameter equivalence. The following parameters must match for direct substitution:

• Resistance value: 100 mOhms
• Tolerance: ±5%
• Power rating: 3W
• Composition: Wirewound
• Package type: Axial
• Physical dimensions: 0.220" Dia x 0.516" L (5.60mm x 13.10mm)
• Number of terminations: 2
• Features: Flame retardant coating and safety characteristics

The 23JR10E meets all electrical and mechanical requirements for direct substitution. The primary difference is packaging configuration: the 23JR10 is supplied in standard packaging, while the 23JR10E is supplied in bulk packaging.

Parameter Comparison

Engineering Selection Recommendations

Both the 23JR10 and 23JR10E are Active status components suitable for direct substitution based on electrical and mechanical equivalence. Selection between these parts should be based on the following factors:

The 23JR10E offers ROHS3 compliance, making it the preferred choice for applications requiring RoHS certification. The 23JR10 is RoHS non-compliant and should be selected only when RoHS compliance is not a requirement.

Packaging differences exist between the two parts: the 23JR10 uses standard packaging while the 23JR10E uses bulk packaging. Bulk packaging is typically selected for high-volume production runs, while standard packaging is suitable for lower-volume applications or when individual component handling is required.

Both parts share identical electrical specifications, physical dimensions, and safety features, ensuring functional interchangeability in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the 23JR10E replace the 23JR10 in all applications?

A: Yes, the 23JR10E is electrically and mechanically equivalent to the 23JR10. Both components have identical resistance values, tolerance, power ratings, physical dimensions, and safety features. The primary consideration is RoHS compliance: the 23JR10E is ROHS3 compliant while the 23JR10 is not.

Q: What is the difference between standard and bulk packaging?

A: Standard packaging is used for individual component distribution and smaller order quantities. Bulk packaging is designed for high-volume production environments where components are used in large quantities. Both packaging types contain the same component with identical electrical and mechanical specifications.

Q: Are the physical dimensions identical between 23JR10 and 23JR10E?

A: Yes. Both parts have identical dimensions of 0.220" Dia x 0.516" L (5.60mm x 13.10mm) and are supplied in axial package configuration. They are mechanically interchangeable in PCB layouts and through-hole applications.

Q: Which part should be selected for RoHS-compliant applications?

A: The 23JR10E is ROHS3 compliant and should be selected for applications requiring RoHS certification. The 23JR10 is RoHS non-compliant and is not suitable for RoHS-regulated applications.

Q: Do both parts have the same safety and flame retardant features?

A: Yes. Both the 23JR10 and 23JR10E include flame retardant coating and safety features as standard specifications.