Equivalent & Substitute Parts for Ohmite 23J2K0

Part Overview

The Ohmite 23J2K0 is a 2 kOhms ±5% 3W through-hole resistor with axial leads, featuring wirewound construction and flame retardant coating. This component is classified as Active product status with 1081 pieces currently in stock. Alternative part numbers are necessary to address packaging variations, compliance requirements, and inventory availability across different procurement channels.

Substiute Parts

23J2K0

OhmiteIn Stock: 112723J2K0 Datasheet

Current PartRFQ

23J2K0E

OhmiteIn Stock: 182023J2K0E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 23J2K0E is classified as a direct equivalent based on the following criteria:

• Identical resistance value: 2 kOhms
• Identical tolerance: ±5%
• Identical power rating: 3W
• Identical composition: Wirewound
• Identical package configuration: Axial
• Identical temperature coefficient: ±30ppm/°C
• Identical physical dimensions: 0.220" Dia x 0.516" L (5.60mm x 13.10mm)
• Identical number of terminations: 2
• Identical features: Flame Retardant Coating, Safety

The primary distinction between these parts is packaging format (tape/reel versus bulk) and RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the 23J2K0 and 23J2K0E are Active status components manufactured by Ohmite with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

• RoHS Compliance Requirements: The 23J2K0E meets ROHS3 compliance standards, while the 23J2K0 is RoHS non-compliant. Applications subject to RoHS directives must use the 23J2K0E.
• Packaging Requirements: The 23J2K0E is supplied in bulk packaging, suitable for high-volume manufacturing processes. The 23J2K0 uses standard packaging appropriate for lower-volume or mixed-component procurement.
• Inventory Availability: The 23J2K0E has higher current stock levels (1785 pcs) compared to the 23J2K0 (1081 pcs).

Both parts share identical REACH and ECCN classifications (REACH Unaffected, EAR99).

Frequently Asked Questions (FAQ)

Q: Can 23J2K0E be used as a direct replacement for 23J2K0?

A: Yes. Both parts have identical electrical specifications (2 kOhms, ±5%, 3W), identical wirewound composition, identical axial package configuration, and identical physical dimensions. The 23J2K0E is electrically and mechanically interchangeable with the 23J2K0.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging format (bulk versus standard) and RoHS compliance status. The 23J2K0E is ROHS3 compliant, while the 23J2K0 is not. Both parts are functionally identical.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. If RoHS compliance is mandatory, use 23J2K0E. If RoHS compliance is not required and standard packaging is preferred, either part is suitable based on availability and procurement preferences.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical dimensions of 0.220" Dia x 0.516" L (5.60mm x 13.10mm) and identical axial package configuration, ensuring identical PCB footprint and mounting characteristics.

Q: What certifications apply to both parts?

A: Both parts are classified as REACH Unaffected and carry EAR99 ECCN designation. The 23J2K0E additionally meets ROHS3 compliance requirements.