23FD3310-F Film Capacitor - Equivalent & Substitute Parts

Part Overview

The 23FD3310-F is a 10 µF film capacitor rated for 330V AC, manufactured by Cornell Dubilier Electronics (CDE) in the MPF series. This component is designed for motor run and power factor correction (PFC) applications and features a metallized polypropylene dielectric in a radial, can-style package with quick connect/disconnect termination.

The 23FD3310-F carries an Obsolete product status. Identifying qualified substitute components ensures continued availability and supports maintenance of equipment requiring this capacitor specification.

Substiute Parts

23FD3310-F

Cornell Dubilier Electronics (CDE)In Stock: 110723FD3310-F Datasheet

Current PartRFQ

23FD3310A-F

Cornell Dubilier Electronics (CDE)In Stock: 83223FD3310A-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 23FD3310-F is determined by the following critical parameters that must match:

• Capacitance Value: 10 µF (exact match required)
• Voltage Rating: 330V AC (minimum requirement)
• Dielectric Type: Polypropylene (PP), Metallized
• Package Configuration: Radial, Can
• Termination Type: Quick Connect, Disconnect
• Lead Spacing: 0.813" (20.64mm)
• Temperature Range: -40°C to 70°C (minimum)

Components matching all these parameters are classified as direct substitutes. Variations in physical dimensions (such as height), inventory status, or packaging configuration do not affect functional substitutability when the above core parameters are preserved.

Parameter Comparison

Engineering Selection Recommendations

The 23FD3310A-F qualifies as a direct functional substitute for the 23FD3310-F. Both components are manufactured by Cornell Dubilier Electronics within the same MPF series and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction is product status: the original 23FD3310-F is obsolete, while the 23FD3310A-F maintains active status and availability. Both components carry ROHS3 compliance and equivalent environmental ratings.

Height dimension variation (2.880" vs. 2.630") exists between the two parts due to packaging differences, but this does not impact electrical performance or functional compatibility in chassis-mount applications where the component utilizes a holder/bracket assembly.

Frequently Asked Questions (FAQ)

Q: Can the 23FD3310A-F replace the 23FD3310-F in existing equipment?

A: The 23FD3310A-F is electrically and mechanically equivalent to the 23FD3310-F. Both components maintain identical capacitance, voltage rating, temperature range, and termination configuration. Substitution is appropriate for applications currently using the obsolete 23FD3310-F.

Q: What is the difference between these part numbers?

A: The part numbers differ in their suffix designations (F vs. A-F), reflecting packaging and product status differences. The 23FD3310-F is obsolete with specific packaging, while 23FD3310A-F is the active production variant available in bulk packaging. Electrical performance and core specifications are identical.

Q: Does the height difference affect installation?

A: The seated height difference (2.880" vs. 2.630") is accommodated by the chassis-mount bracket/holder assembly. Since both components use identical lead spacing (0.813") and mounting configuration, physical installation in bracket-based systems is compatible.

Q: Are both parts RoHS compliant?

A: Both the 23FD3310-F and 23FD3310A-F carry ROHS3 compliance status, confirming conformance to RoHS requirements.

Q: What applications are these capacitors suitable for?

A: Both parts are specified for motor run applications and power factor correction (PFC) circuits operating at 330V AC.