Equivalent & Substitute Parts for Bourns 2310-V-RC

Part Overview

The Bourns 2310-V-RC is a 56 µH unshielded toroidal inductor rated for 10.2 A continuous current with a maximum DC resistance of 17 mOhm. This through-hole component operates across the industrial temperature range of -55°C to 105°C and is ROHS3 compliant. The part is currently active in production with 913 units in stock. Substitute parts may be required due to inventory constraints, application-specific shielding requirements, or supply chain considerations.

Substiute Parts

2310-V-RC

Bourns Inc.In Stock: 9762310-V-RC Datasheet

Current PartRFQ

HCTI-56-10.2

Signal TransformerIn Stock: 2223HCTI-56-10.2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The Signal Transformer HCTI-56-10.2 qualifies as a direct substitute based on the following critical parameters:

• Inductance value: 56 µH (identical)
• Inductance tolerance: ±15% (identical)
• Current rating: 10.2 A (identical)
• DC resistance: 17 mOhm maximum (identical)
• Operating temperature range: -55°C to 105°C (identical)
• Mounting type: Through hole (identical)
• Package configuration: Radial, Vertical (Open) (identical)
• Physical dimensions: 1.280" Dia x 0.650" W (32.51mm x 16.51mm) (identical)
• Inductance test frequency: 1 kHz (identical)

The primary difference between these parts is the shielding configuration: the Bourns 2310-V-RC is unshielded, while the Signal Transformer HCTI-56-10.2 is shielded. Both parts maintain identical electrical performance specifications and physical form factors, making them functionally interchangeable in applications where shielding requirements are compatible.

Parameter Comparison

Engineering Selection Recommendations

Both the Bourns 2310-V-RC and Signal Transformer HCTI-56-10.2 are active production components with full ROHS3 and REACH compliance. Selection between these parts should be based on application-specific requirements:

The Bourns 2310-V-RC unshielded configuration is suitable for applications where electromagnetic shielding is not required or where cost optimization is prioritized. The Signal Transformer HCTI-56-10.2 shielded variant provides electromagnetic containment for noise-sensitive circuits and environments where EMI mitigation is necessary. Both parts deliver identical electrical performance across the specified inductance, current, and resistance parameters. Packaging format differs (Bulk versus Tray), which may influence procurement and assembly workflows.

Frequently Asked Questions (FAQ)

Q: Can the Signal Transformer HCTI-56-10.2 replace the Bourns 2310-V-RC in all applications?

A: Yes, from an electrical and mechanical standpoint. The shielded variant provides additional EMI containment. Verify that your application either requires or tolerates shielding before substitution.

Q: What is the primary difference between these two inductors?

A: The Bourns 2310-V-RC is unshielded, while the Signal Transformer HCTI-56-10.2 is shielded. All other electrical specifications and physical dimensions are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 1.280" diameter by 0.650" width (32.51mm x 16.51mm) and use the same radial, vertical (open) package configuration for through-hole mounting.

Q: Do both parts meet the same compliance standards?

A: Yes. Both are ROHS3 compliant and REACH unaffected, with identical operating temperature ranges of -55°C to 105°C.

Q: What is the difference in packaging format?

A: The Bourns 2310-V-RC is supplied in bulk packaging, while the Signal Transformer HCTI-56-10.2 is supplied in tray packaging. This affects handling and assembly processes but does not impact electrical performance.

Q: Are the inductance values and tolerances identical?

A: Yes. Both parts are rated at 56 µH with ±15% tolerance, tested at 1 kHz.