Phoenix Contact 2297387 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 2297387 is a 3-phase reversing contactor designed for industrial switching applications. This solid-state relay (SSR) operates with a 230VAC input and supports load voltages ranging from 48V to 575V, with a rated load current of 37A. The device features zero-cross switching technology and DIN rail mounting for standard industrial panel installations.

This part is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and new installations where continued supply cannot be guaranteed.

Substiute Parts

2297387

Phoenix ContactIn Stock: 10642297387 Datasheet

Current PartRFQ

RGC3A60A30KGE

Carlo Gavazzi Inc.In Stock: 1098RGC3A60A30KGE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 2297387 is determined by the following critical parameters:

• Circuit Configuration: Must maintain 3PST-NO (3 Form A) topology for three-phase reversing control
• Output Type: AC switching with zero-cross capability required for load protection
• Load Current: Substitute must support minimum 37A continuous rating
• Input Voltage: Control signal compatibility at 230VAC or compatible range
• Load Voltage Range: Must encompass the 48–575V operating window
• Mounting and Termination: DIN rail compatibility with screw terminal connections
• Package Type: SSR with integrated heat sink for thermal management

The Carlo Gavazzi RGC3A60A30KGE qualifies as a functional substitute based on matching circuit topology, output switching characteristics, mounting compatibility, and termination style. However, the load current rating differs and must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The Carlo Gavazzi RGC3A60A30KGE presents a viable alternative for applications currently using the obsolete Phoenix Contact 2297387, provided the following conditions are met:

Compatibility Factors:

• Both devices maintain identical 3PST-NO circuit topology and zero-cross AC switching characteristics
• Input voltage range of the Carlo Gavazzi unit (20–275VAC) encompasses the 230VAC control signal requirement
• Load voltage capability of the Carlo Gavazzi unit (42–600V) exceeds the original specification range (48–575V)
• DIN rail mounting and screw terminal termination are preserved across both devices

Critical Consideration:

• The Carlo Gavazzi RGC3A60A30KGE is rated for 30A continuous load current, compared to the original 37A rating. Applications operating at or near the 37A threshold require load current reassessment to confirm compatibility within the reduced rating.

Compliance Status:

• The Carlo Gavazzi unit maintains active product status with current RoHS compliance certification, ensuring long-term availability and regulatory alignment
• Both devices carry EAR99 export classification

Frequently Asked Questions (FAQ)

Q: Can the Carlo Gavazzi RGC3A60A30KGE directly replace the Phoenix Contact 2297387 in all applications?

A: Direct replacement is possible for applications where the load current does not exceed 30A. The 7A reduction in current rating must be verified against actual system load requirements. All other electrical and mechanical parameters are compatible.

Q: What is the significance of the load current difference between these two devices?

A: Load current rating determines the maximum continuous current the relay can safely switch without thermal degradation. The Phoenix Contact unit supports 37A; the Carlo Gavazzi unit supports 30A. Applications operating above 30A require alternative solutions or load redistribution.

Q: Are the input voltage ranges compatible?

A: Yes. The Phoenix Contact 2297387 operates at 230VAC input. The Carlo Gavazzi RGC3A60A30KGE accepts 20–275VAC, which includes the 230VAC control signal. The Carlo Gavazzi unit also accepts 24–190VDC, providing additional control flexibility.

Q: Do both devices support the same load voltage range?

A: The Carlo Gavazzi unit supports a broader load voltage range (42–600V) compared to the Phoenix Contact unit (48–575V). Both ranges are compatible with standard three-phase industrial power systems.

Q: What are the mounting differences between these devices?

A: The Phoenix Contact 2297387 is specified for DIN rail mounting. The Carlo Gavazzi RGC3A60A30KGE supports both chassis mount and DIN rail configurations, providing installation flexibility.

Q: Are there compliance or regulatory differences?

A: The Phoenix Contact unit carries ROHS3 compliance; the Carlo Gavazzi unit carries standard RoHS compliance. Both are EAR99 classified. The Carlo Gavazzi unit is currently active in production, while the Phoenix Contact unit is obsolete.