TE Connectivity AMP Connectors 2-292173-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 2-292173-7 is a rectangular connector header designed for surface mount, right-angle applications with 7 positions at 0.079" (2.00mm) pitch. This connector is classified as a board-to-cable/wire interface component with shrouded 4-wall construction and solder termination. The part maintains Active product status and is ROHS3 compliant with UL94 V-0 flammability rating. Substitute parts are identified to address inventory availability, application-specific requirements, or design optimization needs while maintaining functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

2-292173-7

TE Connectivity AMP ConnectorsIn Stock: 10412-292173-7 Datasheet

Current PartRFQ

5023520700

MolexIn Stock: 61345023520700 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 2-292173-7 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 7
• Pitch - Mating: 0.079" (2.00mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Surface Mount, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Style: Board to Cable/Wire
• Contact Finish: Tin
• Insulation Material: Polyamide or Nylon-based
• Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

The Molex 5023520700 connector satisfies all mandatory matching parameters. Variations in contact length, insulation height, fastening mechanism (Detent Lock versus Latch Lock), contact material composition (Brass versus Copper Alloy), and insulation color do not preclude substitution when the core functional and electrical parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 2-292173-7 and Molex 5023520700 maintain Active product status with full ROHS3 compliance and REACH unaffected designation. Both connectors carry UL94 V-0 flammability certification and MSL Level 1 (Unlimited) moisture sensitivity rating, indicating equivalent environmental and regulatory compliance profiles.

The TE Connectivity 2-292173-7 features a Detent Lock fastening mechanism with 0.165" (4.20mm) mating contact length and 0.228" (5.80mm) insulation height. The Molex 5023520700 employs a Latch Lock fastening mechanism with 0.136" (3.45mm) mating contact length and 0.252" (6.40mm) insulation height. These dimensional and mechanical variations do not affect electrical compatibility or functional interchangeability within applications where the 7-position, 2.00mm pitch, surface-mount, right-angle header configuration is specified.

Contact material composition differs between brass (TE Connectivity) and copper alloy (Molex), with both materials providing equivalent tin-plated surface finishes. Insulation material specifications both utilize polyamide/nylon formulations with glass-filled variants available, supporting equivalent electrical and thermal performance characteristics.

Selection between these parts should be based on inventory availability, application-specific mechanical requirements related to fastening preference, or design constraints related to connector height and contact engagement depth.

Frequently Asked Questions (FAQ)

Q: Can the Molex 5023520700 directly replace the TE Connectivity 2-292173-7 in existing designs?

A: Yes. Both connectors share identical pitch (0.079"/2.00mm), position count (7), mounting orientation (surface mount right-angle), shrouding configuration (4-wall), and termination method (solder). The connectors are electrically and mechanically interchangeable within applications designed for 7-position, 2.00mm pitch header connectors.

Q: What are the dimensional differences between these two connectors?

A: The TE Connectivity 2-292173-7 has a mating contact length of 0.165" (4.20mm) and insulation height of 0.228" (5.80mm). The Molex 5023520700 has a mating contact length of 0.136" (3.45mm) and insulation height of 0.252" (6.40mm). These variations may affect board-to-connector clearance and mating depth in space-constrained applications.

Q: Do both connectors meet the same regulatory and compliance standards?

A: Yes. Both the TE Connectivity 2-292173-7 and Molex 5023520700 are ROHS3 compliant, REACH unaffected, carry UL94 V-0 flammability certification, and maintain MSL Level 1 (Unlimited) moisture sensitivity rating. Both are classified under ECCN EAR99 and HTSUS code 8536.69.4040.

Q: What is the difference between Detent Lock and Latch Lock fastening mechanisms?

A: The TE Connectivity 2-292173-7 uses Detent Lock fastening, while the Molex 5023520700 uses Latch Lock fastening. Both mechanisms provide secure mating retention. The specific fastening type should be verified against mating connector specifications to ensure compatibility with the corresponding receptacle design.

Q: Are there any differences in contact material that affect performance?

A: The TE Connectivity 2-292173-7 uses brass contacts, while the Molex 5023520700 uses copper alloy contacts. Both materials are tin-plated and provide equivalent electrical conductivity and corrosion resistance for general-purpose and industrial applications.

Q: What packaging format is available for both connectors?

A: Both the TE Connectivity 2-292173-7 and Molex 5023520700 are supplied in Tape & Reel (TR) packaging format, suitable for automated assembly processes.

Q: Can these connectors be used in automotive applications?

A: The TE Connectivity 2-292173-7 is specified for general-purpose applications. The Molex 5023520700 is specified for automotive and industrial applications. Application suitability should be confirmed against specific automotive qualification requirements and design specifications.