Phoenix Contact 2283621 - 25 Position Interface Module Terminal Block

Part Overview

The Phoenix Contact 2283621 is a 25-position interface module terminal block designed for screw connection to D-Sub male connectors. This component provides electrical interface between process-side terminal blocks and control-side D-Sub connectors with jackscrew socket retention. The part is classified as obsolete, making identification of suitable alternatives necessary for ongoing system maintenance and new designs requiring equivalent functionality.

Substiute Parts

2283621

Phoenix ContactIn Stock: 7302283621 Datasheet

Current PartRFQ

2315133

Phoenix ContactIn Stock: 13332315133 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 2283621 is determined by the following critical parameters:

• Connector Type & Configuration: D-Sub male interface with 25 positions
• Connection Method: Screw connection on process side
• Electrical Ratings: Voltage and current capacity per contact
• Wire Gauge Compatibility: 12-24 AWG acceptance
• Physical Dimensions: Form factor and mounting compatibility
• Environmental Compliance: RoHS and REACH certification status
• Operating Temperature Range: -20°C ~ 50°C

The Phoenix Contact 2315133 qualifies as a substitute based on matching connector type, position count, connection method, wire gauge range, and operating temperature specifications. Variations in current rating, voltage specification, physical dimensions, and series designation reflect design evolution within the VARIOFACE product family.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 2315133 is an active product substitute for the obsolete 2283621. Both components share identical functional specifications for connector type, position count, connection methodology, and operating temperature range. The 2315133 provides current regulatory compliance through ROHS3 certification and active product status, ensuring continued availability and support.

The primary electrical difference is the current rating per contact: 2283621 is rated at 2.5 A while 2315133 is rated at 2 A. Applications requiring the full 2.5 A per-contact capacity must evaluate whether the 2 A rating of the substitute is acceptable for the intended circuit. Physical dimensions differ between the two parts; mounting and spatial constraints must be verified for compatibility in existing installations.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 2315133 directly replace the 2283621 in all applications?

A: Both parts share identical D-Sub male 25-position interface specifications, screw connection methodology, and operating temperature range. The 2315133 is suitable for applications where the 2 A per-contact current rating meets circuit requirements. Physical dimensions differ; verify mounting compatibility in your specific installation.

Q: What is the significance of the series designation change from FLK to VIP?

A: The series designation reflects product line evolution within the VARIOFACE family. Both FLK and VIP series maintain compatibility with D-Sub male 25-position connectors and screw-connection terminal blocks. The VIP series represents the current active product line.

Q: Are there compliance differences between the two parts?

A: The 2283621 carries RoHS Compliant certification, while the 2315133 carries ROHS3 Compliant certification. The 2315133 is also REACH Affected, indicating current regulatory tracking. Both parts maintain MSL 1 (Unlimited) moisture sensitivity classification.

Q: How do the physical dimensions affect substitution?

A: The 2283621 measures 2.795" × 2.031" while the 2315133 measures 2.260" × 2.717". Length and width differences may impact panel mounting, connector alignment, and spatial clearance. Verify dimensional compatibility within your enclosure or mounting structure before substitution.

Q: What wire gauge range is supported by both parts?

A: Both the 2283621 and 2315133 accept 12-24 AWG wire gauge, ensuring compatibility with standard industrial wiring practices for this connector class.