Equivalent & Substitute Parts for 227SVL010MFE

Part Overview

The 227SVL010MFE is a 220 µF, 10 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general purpose applications. The part operates across a temperature range of -55°C to 105°C with a rated lifetime of 5000 hours at 105°C. Substitute parts are identified when equivalent capacitance and tolerance specifications can be maintained while accommodating different voltage ratings, ESR characteristics, or ripple current requirements within the same physical package category.

Substiute Parts

227SVL010MFE

Cornell Dubilier / Illinois CapacitorIn Stock: 857227SVL010MFE Datasheet

Current PartRFQ

ATB227M025

Cornell Dubilier / Illinois CapacitorIn Stock: 32834ATB227M025 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 227SVL010MFE is determined by the following criteria:

Capacitance Match: The substitute part must maintain 220 µF capacitance value with ±20% tolerance to ensure functional equivalence in the circuit.

Voltage Rating Compatibility: The substitute part may have a higher voltage rating than the original 10 V specification. A higher voltage rating does not compromise circuit function and provides additional design margin. The substitute part ATB227M025 operates at 25 V, which is compatible with applications designed for 10 V operation.

Physical Package Compatibility: Both parts must use the same Radial, Can - SMD package type with surface mount mounting. The physical dimensions (diameter and height) must be compatible with the PCB land pattern and assembly process.

Electrical Performance Parameters: ESR, ripple current ratings, and operating temperature range must be suitable for the intended application. The substitute part may exhibit improved electrical characteristics (lower ESR, higher ripple current capacity) compared to the original part.

Compliance and Certification: Both parts must maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status to ensure regulatory and environmental compatibility.

Parameter Comparison

Engineering Selection Recommendations

The ATB227M025 serves as a direct substitute for the 227SVL010MFE based on the following engineering criteria:

Capacitance and Tolerance Equivalence: Both parts maintain identical 220 µF capacitance with ±20% tolerance, ensuring functional compatibility in circuits designed for the original specification.

Voltage Rating Upgrade: The ATB227M025 operates at 25 V compared to the 10 V rating of the 227SVL010MFE. This higher voltage rating is compatible with 10 V circuit applications and provides additional design margin without introducing functional incompatibility.

Improved Electrical Performance: The substitute part exhibits lower ESR (960 mOhm versus 1.81 Ohm at 120 Hz) and higher ripple current capacity (420 mA at 120 Hz and 600 mA at 100 kHz versus 170 mA and 255 mA respectively). These improvements enhance circuit performance and thermal characteristics.

Physical Package Compatibility: Both parts use identical Radial, Can - SMD package type with compatible physical dimensions (8.00 mm diameter, approximately 10.5-10.6 mm height). The surface mount land pattern compatibility ensures seamless PCB integration.

Regulatory and Compliance Alignment: Both parts maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status, ensuring regulatory requirements are met for both original and substitute applications.

Product Status and Availability: Both parts carry Active product status with established manufacturing and supply chains, supporting long-term design reliability and component availability.

Frequently Asked Questions (FAQ)

Q: Can the ATB227M025 be used as a direct replacement for the 227SVL010MFE in a 10 V circuit?

A: Yes. The ATB227M025 is electrically compatible with circuits designed for the 227SVL010MFE. The higher 25 V voltage rating of the substitute part does not compromise functionality in a 10 V application and provides additional design margin.

Q: What is the primary difference between these two parts?

A: The main differences are voltage rating (10 V versus 25 V), ESR (1.81 Ohm versus 960 mOhm at 120 Hz), and ripple current capacity. The ATB227M025 offers improved electrical performance characteristics while maintaining identical capacitance and tolerance specifications.

Q: Are the physical dimensions compatible for PCB assembly?

A: Yes. Both parts use the same Radial, Can - SMD package type with compatible physical dimensions. The diameter is identical at 0.315" (8.00 mm), and the heights are nearly equivalent (0.417" versus 0.413" seated maximum), ensuring PCB land pattern compatibility.

Q: Do both parts meet the same regulatory and environmental standards?

A: Yes. Both the 227SVL010MFE and ATB227M025 are ROHS3 compliant, carry MSL Level 1 rating, and maintain REACH unaffected status, ensuring equivalent regulatory and environmental compliance.

Q: What is the lifetime specification for both parts?

A: Both parts are rated for 5000 hours of operation at 105°C, providing identical thermal reliability specifications across the operating temperature range of -55°C to 105°C.

Q: Can the substitute part handle higher ripple currents?

A: Yes. The ATB227M025 supports higher ripple current ratings (420 mA at 120 Hz and 600 mA at 100 kHz) compared to the 227SVL010MFE (170 mA at 120 Hz and 255 mA at 100 kHz), making it suitable for applications with elevated ripple current requirements.