227BPS100M Aluminum Electrolytic Capacitor - Equivalent & Substitute Parts

Part Overview

The 227BPS100M is a 220 µF, 100 V aluminum electrolytic capacitor manufactured by Cornell Dubilier / Illinois Capacitor in the BPS series. This radial, through-hole component is designed for audio applications with a rated lifetime of 2000 hours at 85°C and operates across the temperature range of -40°C to 85°C. The part maintains Active product status and is RoHS3 compliant.

Substitute parts become necessary when the primary component reaches end-of-life inventory, when supply chain constraints occur, or when design flexibility is required for procurement optimization. Equivalent components must maintain identical electrical performance characteristics and physical compatibility to ensure direct replacement without circuit redesign.

Substiute Parts

227BPS100M

Cornell Dubilier / Illinois CapacitorIn Stock: 915227BPS100M Datasheet

Current PartRFQ

UVP2A221MHD

NichiconIn Stock: 854UVP2A221MHD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 227BPS100M is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 220 µF (exact match)
• Voltage rating: 100 V (minimum, equal or higher acceptable)
• Tolerance: ±20% (matching or tighter tolerance acceptable)
• Lifetime rating: 2000 Hrs @ 85°C (minimum requirement)
• Operating temperature range: -40°C ~ 85°C (minimum coverage required)
• Ripple current capability: 720 mA @ 120 Hz and 1.0728 A @ 50 kHz (minimum)

Mechanical Equivalence Requirements:

• Package type: Radial, Can (exact match)
• Mounting type: Through Hole (exact match)
• Lead spacing: 0.295" (7.50 mm) (exact match)
• Physical dimensions: 0.709" Dia (18.00 mm) and 1.476" Height (37.50 mm) (exact match)
• Polarization: Bi-Polar (exact match)

Compliance Requirements:

• RoHS3 compliance (mandatory for new designs)
• HTSUS classification: 8532.22.0020 (commodity code alignment)

The UVP2A221MHD from Nichicon meets all electrical and mechanical equivalence criteria and maintains RoHS3 compliance, qualifying it as a direct substitute for the 227BPS100M.

Parameter Comparison

Engineering Selection Recommendations

Primary Component (227BPS100M): The 227BPS100M maintains Active product status and is the preferred selection for new designs. This component is manufactured by Cornell Dubilier / Illinois Capacitor and carries full RoHS3 compliance certification. Current inventory of 861 pieces supports immediate procurement requirements.

Substitute Component (UVP2A221MHD): The UVP2A221MHD from Nichicon is classified as "Not For New Designs" and carries REACH Affected status, whereas the primary part is REACH Unaffected. This substitute is suitable for legacy system maintenance, field replacements, or procurement scenarios where the primary component is unavailable. The substitute maintains electrical and mechanical equivalence with identical capacitance, voltage rating, tolerance, lifetime rating, temperature range, ripple current specifications, and physical dimensions. Current inventory of 813 pieces is available.

Selection Criteria: For new design implementations, the 227BPS100M is the specified component. For existing systems requiring replacement or when primary component supply is constrained, the UVP2A221MHD provides direct functional and mechanical compatibility. Both components are RoHS3 compliant and share identical HTSUS commodity classification (8532.22.0020).

Frequently Asked Questions (FAQ)

Q: Can the UVP2A221MHD directly replace the 227BPS100M in existing circuits?

A: Yes. The UVP2A221MHD is electrically and mechanically equivalent to the 227BPS100M. Both components share identical capacitance (220 µF), voltage rating (100 V), tolerance (±20%), lifetime rating (2000 Hrs @ 85°C), operating temperature range (-40°C ~ 85°C), ripple current specifications, and physical dimensions (0.709" diameter, 1.476" height, 0.295" lead spacing). Through-hole radial mounting is identical on both components.

Q: What is the difference between the ESR specifications of these two parts?

A: The 227BPS100M specifies ESR of 750 mOhm @ 120 Hz. The UVP2A221MHD does not provide ESR specification in the available data. For applications where ESR is a critical design parameter, the 227BPS100M should be prioritized. For general-purpose applications, the UVP2A221MHD is suitable.

Q: Why is the UVP2A221MHD marked "Not For New Designs"?

A: The UVP2A221MHD carries a "Not For New Designs" status, indicating that Nichicon has designated this part for legacy support only. New designs should specify the 227BPS100M. The substitute is appropriate for field replacements, maintenance of existing systems, or temporary procurement solutions.

Q: Are there compliance differences between these components?

A: Both components are RoHS3 compliant. The 227BPS100M is REACH Unaffected, while the UVP2A221MHD is REACH Affected. Both share the same HTSUS classification (8532.22.0020) and ECCN designation (EAR99). For applications with strict REACH compliance requirements, the 227BPS100M is preferred.

Q: Can these capacitors be used in audio applications?

A: The 227BPS100M is specified for audio applications. The UVP2A221MHD is designated for general-purpose applications. Both components possess the electrical characteristics necessary for audio circuit implementation, including appropriate ripple current ratings and low ESR performance (where specified).

Q: What is the lead spacing and how does it affect PCB design?

A: Both components have identical lead spacing of 0.295" (7.50 mm). PCB layouts designed for the 227BPS100M require no modification to accommodate the UVP2A221MHD. The radial, through-hole package type and physical dimensions are identical across both components.