Equivalent & Substitute Parts for 226TLS016M

Part Overview

The 226TLS016M is a 22 µF, 16 V aluminum electrolytic capacitor in axial configuration, manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for general-purpose applications requiring through-hole mounting. The part operates across a temperature range of -40°C to 85°C with a rated lifetime of 2000 hours at 85°C. Substitute parts are identified when equivalent capacitance and tolerance specifications can be maintained while accommodating different voltage ratings or performance characteristics within the same physical form factor and mounting type.

Substiute Parts

226TLS016M

Cornell Dubilier / Illinois CapacitorIn Stock: 1165226TLS016M Datasheet

Current PartRFQ

226TTA035M

Cornell Dubilier / Illinois CapacitorIn Stock: 21175226TTA035M Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 226TLS016M is permissible with the 226TTA035M based on the following criteria:

Maintained Parameters (Substitution Basis):

• Capacitance: 22 µF (identical)
• Tolerance: ±20% (identical)
• Polarization: Polar (identical)
• Operating Temperature Range: -40°C ~ 85°C (identical)
• Lifetime @ Temperature: 2000 Hrs @ 85°C (identical)
• Package / Case: Axial, Can (identical)
• Mounting Type: Through Hole (identical)
• Physical Dimensions: 0.197" Dia x 0.512" L / 5.00mm x 13.00mm (identical)
• RoHS Status: ROHS3 Compliant (identical)
• MSL Rating: 1 (Unlimited) (identical)

Differing Parameters (Upgrade Characteristics):

• Voltage - Rated: 226TLS016M operates at 16 V; 226TTA035M operates at 35 V
• ESR @ 120Hz: 226TLS016M has 12.057 Ohm; 226TTA035M has 10.55 Ohm (lower)
• Ripple Current @ 120 Hz: 226TLS016M rated at 60 mA; 226TTA035M rated at 70 mA

The 226TTA035M represents a voltage-rated upgrade with improved electrical performance characteristics while maintaining identical mechanical and thermal specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the 226TLS016M and 226TTA035M are Active product status components manufactured by Cornell Dubilier / Illinois Capacitor. Both parts are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

The 226TTA035M is electrically compatible as a substitute for the 226TLS016M in applications where the circuit voltage does not exceed 16 V. The higher voltage rating of the 226TTA035M (35 V versus 16 V) provides additional safety margin in circuits operating at or below 16 V. The lower ESR value (10.55 Ohm versus 12.057 Ohm) and higher ripple current rating (70 mA versus 60 mA) of the 226TTA035M indicate improved performance characteristics.

Selection between these parts depends on circuit voltage requirements and performance specifications. The 226TLS016M is appropriate for applications with strict voltage matching at 16 V. The 226TTA035M is appropriate for applications where voltage headroom is beneficial or where improved ripple current handling is required.

Frequently Asked Questions (FAQ)

Q: Can the 226TTA035M be used in place of the 226TLS016M?

A: Yes. The 226TTA035M is electrically compatible as a substitute for the 226TLS016M in circuits operating at 16 V or below. Both parts have identical capacitance (22 µF), tolerance (±20%), operating temperature range (-40°C ~ 85°C), and physical dimensions (5.00mm x 13.00mm). The 226TTA035M has a higher voltage rating (35 V) and lower ESR, making it suitable for direct substitution in applications where these characteristics are acceptable.

Q: What are the key differences between these parts?

A: The primary differences are voltage rating and electrical performance. The 226TLS016M is rated for 16 V with ESR of 12.057 Ohm and ripple current of 60 mA at 120 Hz. The 226TTA035M is rated for 35 V with ESR of 10.55 Ohm and ripple current of 70 mA at 120 Hz. Both parts maintain identical capacitance, tolerance, temperature range, and physical form factor.

Q: Are both parts RoHS compliant?

A: Yes. Both the 226TLS016M and 226TTA035M are ROHS3 Compliant and REACH Unaffected, meeting current regulatory standards for electronic components.

Q: Do these parts have the same physical dimensions?

A: Yes. Both parts are packaged in identical axial, can configuration with dimensions of 0.197" diameter by 0.512" length (5.00mm x 13.00mm). Both are through-hole mounted components suitable for the same PCB footprint.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts have MSL Rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.