TE Connectivity 225092-1 N Type Coaxial Connector Plug Equivalent & Substitute Parts

Part Overview

The TE Connectivity 225092-1 is an N Type connector plug designed for 50 ohm coaxial cable applications. This male pin connector features crimp termination for both center contact and shield, with a free hanging (in-line) mounting configuration. The connector operates across a frequency range up to 11 GHz and maintains performance across an operating temperature range of -65°C to 165°C.

The 225092-1 is classified as an active product with 700 units currently in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and termination methods within the N Type coaxial connector category.

Substiute Parts

225092-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 715225092-1 Datasheet

Current PartRFQ

1-225092-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 8401-225092-1 Datasheet

Parametric EquivalentRFQ

082-4425

Amphenol RFIn Stock: 1074082-4425 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 225092-1 are identified through strict alignment with core electrical and mechanical parameters. The substitution logic is based on the following criteria:

Primary Matching Parameters:

• Connector Style: N Type
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Frequency - Max: 11 GHz
• Operating Temperature: -65°C ~ 165°C
• Mating Cycles: 500

Termination Compatibility:

• Contact Termination: Crimp (primary) or Crimp/Solder (compatible alternative)
• Shield Termination: Crimp

Material and Construction:

• Center Contact Material: Brass
• Body Material: Brass
• Center Contact Plating: Gold
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Substitute parts must maintain these core specifications to ensure functional and mechanical compatibility within 50 ohm RF coaxial cable systems.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 225092-1 (Primary Part)

The 225092-1 is the primary specification part with active product status and established supply availability. This part is suitable for new designs and applications requiring TE Connectivity sourcing.

TE Connectivity 1-225092-1 (Parametric Equivalent)

The 1-225092-1 is a parametric equivalent offering identical electrical and mechanical specifications to the 225092-1. However, this part is discontinued at DiGi Electronics. The 1-225092-1 maintains full compatibility with the main part across all critical parameters including impedance, frequency range, operating temperature, and voltage rating. This part is suitable only for replacement applications where existing inventory is available.

Amphenol RF 082-4425 (Cross-Manufacturer Substitute)

The 082-4425 is a cross-manufacturer substitute from Amphenol RF that meets all core electrical and mechanical requirements of the 225092-1. Key differences include:

• Contact Termination: Supports both Crimp and Solder methods (versus Crimp only for 225092-1)
• Voltage Rating: 1500 V (versus 1000 V for 225092-1)
• Cable Group Compatibility: Supports RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, 393 (broader cable compatibility)
• Insertion Loss: 0.15 dB (specified for 082-4425)
• Moisture Sensitivity Level: 1 (Unlimited)

The 082-4425 is active and maintains higher inventory availability (984 units). This part is suitable for applications where cross-manufacturer sourcing is acceptable and where the enhanced voltage rating and termination flexibility provide system benefits.

All three parts maintain ROHS3 compliance, REACH affected status, and EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can the 1-225092-1 be used as a direct replacement for the 225092-1?

A: The 1-225092-1 is a parametric equivalent with identical electrical and mechanical specifications. However, the 1-225092-1 is discontinued at DiGi Electronics. Direct substitution is technically valid but subject to inventory availability constraints.

Q: What are the key differences between the 225092-1 and the Amphenol RF 082-4425?

A: The 082-4425 differs in three areas: (1) Contact Termination supports both Crimp and Solder methods versus Crimp only; (2) Voltage Rating is 1500 V versus 1000 V; (3) Cable Group compatibility is broader, supporting RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, 393 versus the 225092-1 which specifies RG-214. All other electrical and mechanical parameters are identical.

Q: Are all three parts compatible with the same cable types?

A: The 225092-1 specifies RG-214 cable group. The 1-225092-1 specifies RG-393. The 082-4425 supports a broader range including RG-8, 8A, 9, 9A, 9B, 87, 213, 214, 225, 302, 393. Cable compatibility must be verified for specific applications.

Q: Do all substitute parts maintain the same operating temperature range?

A: Yes. All three parts operate across -65°C to 165°C, ensuring thermal compatibility across the specified range.

Q: What is the mating cycle rating for these connectors?

A: All three parts are rated for 500 mating cycles, indicating equivalent mechanical durability.

Q: Are there compliance differences between the parts?

A: All three parts are ROHS3 compliant, REACH affected, and classified as EAR99 for export purposes. Compliance status is equivalent across all parts.

Q: Which part should be selected for new designs?

A: The 225092-1 is recommended for new designs due to active product status and established supply. The 082-4425 is an acceptable alternative where cross-manufacturer sourcing is permitted and where the enhanced voltage rating (1500 V) and termination flexibility provide system benefits.

Q: What is the frequency operating range for these N Type connectors?

A: All three parts operate up to 11 GHz maximum frequency, suitable for RF and microwave applications within this bandwidth.

Q: Do these connectors include ferrule components?

A: Yes. All three parts include 3 pieces per connector: 1 Connector, 1 Contact, 1 Ferrule.