Equivalent & Substitute Parts for 2250507-1

Part Overview

The 2250507-1 is a 1 Port RJ45 Through Hole 5G Base-T modular connector manufactured by TRP Connector B.V. under the MagJack® series. This connector supports AutoMDIX and Power over Ethernet (PoE) applications with a 90° right-angle orientation and solder termination. The part is Active in product status with 880 units currently in stock. Alternative equivalent parts may be required due to supply availability, lead time considerations, or inventory constraints in procurement workflows.

Substiute Parts

2250507-1

TRP Connector B.V.In Stock: 9482250507-1 Datasheet

Current PartRFQ

0826-1X1T-KL-F

Bel Fuse Inc.In Stock: 17020826-1X1T-KL-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 0826-1X1T-KL-F manufactured by Bel Fuse Inc. qualifies as a direct equivalent based on the following critical parameters:

All electrical and mechanical specifications are identical to the main part: RJ45 connector type, single port configuration, through-hole mounting, 90° right-angle orientation, solder termination, 0.536" (13.61mm) height above board, 5G Base-T with AutoMDIX and PoE support, shielded construction with EMI finger, phosphor bronze contacts with gold finish, and -40°C to 85°C operating temperature range. Both parts carry identical compliance certifications: ROHS3 Compliant, MSL 1 (Unlimited), REACH Unaffected, and EAR99 ECCN classification. The substitute part is also Active in product status with higher inventory availability (1602 units in stock).

Parameter Comparison

Engineering Selection Recommendations

Both the 2250507-1 and 0826-1X1T-KL-F are Active products with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on procurement factors including inventory availability, lead time, and cost. The 0826-1X1T-KL-F currently has higher stock availability (1602 units versus 880 units). Both parts meet all regulatory requirements including REACH compliance and EAR99 export classification. No technical performance differentiation exists between these equivalent parts for 5G Base-T, AutoMDIX, and PoE applications.

Frequently Asked Questions (FAQ)

Q: Can 0826-1X1T-KL-F be used as a direct replacement for 2250507-1?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters including connector type, port configuration, mounting method, orientation, termination type, height above board, shielding, contact materials, and operating temperature range. Both carry identical compliance certifications.

Q: Are there any differences in housing material between these parts?

A: The main part 2250507-1 specifies Thermoplastic housing material, while the substitute 0826-1X1T-KL-F specifies Polyamide (PA), Nylon housing material. Both materials are suitable for the specified operating temperature range and environmental conditions. This difference does not affect electrical or mechanical compatibility.

Q: What are the key parameters that determine substitution eligibility?

A: Critical parameters for substitution are: RJ45 connector type, single port configuration, through-hole mounting, 90° right-angle orientation, solder termination, 0.536" (13.61mm) height above board, 5G Base-T with AutoMDIX and PoE support, shielded construction with EMI finger, phosphor bronze contacts with gold finish, and -40°C to 85°C operating temperature range.

Q: Are both parts available in the same packaging format?

A: Yes. Both 2250507-1 and 0826-1X1T-KL-F are supplied in Tray packaging.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are ROHS3 Compliant, REACH Unaffected, classified as EAR99, and share the same HTSUS code 8536.69.4040. Both carry MSL 1 (Unlimited) moisture sensitivity rating.