Equivalent & Substitute Parts for 224MABA05KHS

Part Overview

The 224MABA05KHS is a 0.22 µF film capacitor manufactured by Cornell Dubilier / Illinois Capacitor, rated for 1200V DC with polypropylene metallized dielectric construction. This component is designed for motor run applications and features radial through-hole mounting. The part is currently obsolete, necessitating identification of equivalent and substitute components that maintain functional compatibility within system requirements.

Substiute Parts

224MABA05KHS

Cornell Dubilier / Illinois CapacitorIn Stock: 882224MABA05KHS Datasheet

Current PartRFQ

R474N32205001K

KEMETIn Stock: 887R474N32205001K Datasheet

SimilarRFQ

R474N322050A1K

KEMETIn Stock: 1103R474N322050A1K Datasheet

SimilarRFQ

MABA053220KHL

NichiconIn Stock: 1004MABA053220KHL Datasheet

Parametric EquivalentRFQ

MABA053220KHS

NichiconIn Stock: 1010MABA053220KHS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 224MABA05KHS is determined by the following critical parameters:

Parametric Equivalents (Full Compatibility): Parts that match all electrical and mechanical specifications, including capacitance (0.22 µF), tolerance (±10%), DC voltage rating (1200V), AC voltage rating (500V), dielectric material (polypropylene metallized), operating temperature range (-40°C ~ 100°C), lead spacing (27.50mm), and radial through-hole mounting. These parts are direct replacements with identical form factor and performance characteristics.

Functional Substitutes (Reduced Voltage Rating): Parts that maintain identical capacitance, tolerance, dielectric material, and mounting configuration but operate at reduced DC voltage ratings (1000V instead of 1200V). These substitutes are applicable only in circuits where the lower voltage rating remains within system safety margins. Lead spacing is reduced to 22.50mm, requiring PCB layout verification.

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalents - MABA053220KHL and MABA053220KHS (Nichicon):

Both Nichicon parts provide complete electrical and mechanical equivalence to the 224MABA05KHS. These components maintain identical voltage ratings (1200V DC / 500V AC), capacitance value, tolerance, dielectric material, operating temperature range, and lead spacing. Both parts are ROHS3 compliant and currently in active production status. Selection between MABA053220KHL and MABA053220KHS is determined by specific packaging and termination requirements not differentiated in the provided parameters. These parts are suitable for direct substitution without circuit modification.

Functional Substitutes - R474N322050A1K and R474N32205001K (KEMET):

The KEMET R47 series parts provide functional substitution with reduced DC voltage rating (1000V versus 1200V). These components maintain identical capacitance, tolerance, and dielectric material specifications. The reduced lead spacing (22.50mm versus 27.50mm) and smaller physical dimensions require PCB layout verification prior to implementation. The R474N322050A1K carries AEC-Q200 and X1 ratings, while R474N32205001K carries X2 rating. Both parts are ROHS3 compliant and in active production. These substitutes are applicable only in applications where the 1000V DC rating satisfies system voltage requirements with adequate safety margin.

Frequently Asked Questions (FAQ)

Q: Can the KEMET R474N series parts directly replace the 224MABA05KHS without PCB modification?

A: The KEMET parts have reduced lead spacing (22.50mm versus 27.50mm) and smaller physical dimensions. PCB layout verification is required to confirm hole spacing compatibility. The reduced voltage rating (1000V DC versus 1200V DC) must also be evaluated against circuit requirements.

Q: What is the primary reason for substituting the 224MABA05KHS?

A: The 224MABA05KHS is obsolete. The Nichicon MABA053220KHL and MABA053220KHS parts are parametric equivalents in active production and provide identical electrical and mechanical performance.

Q: Are the Nichicon MABA053220KHL and MABA053220KHS parts interchangeable?

A: Both Nichicon parts provide identical electrical specifications and physical dimensions. Selection between them depends on specific packaging and termination requirements not differentiated in the provided technical data.

Q: What is the voltage derating consideration for KEMET R474N substitutes?

A: The KEMET parts operate at 1000V DC compared to the original 1200V DC rating. The 200V reduction must be evaluated against the maximum circuit voltage to ensure adequate safety margin and compliance with system design specifications.

Q: Are all substitute parts RoHS compliant?

A: All parts listed—the original 224MABA05KHS and all substitute options—are ROHS3 compliant.

Q: What is the temperature operating range difference between the main part and substitutes?

A: The original 224MABA05KHS and Nichicon equivalents operate from -40°C to 100°C. The KEMET R474N substitutes have an extended upper temperature limit of 110°C, providing additional thermal margin in high-temperature applications.