Equivalent & Substitute Parts for 224MABA01KGS5

Part Overview

The 224MABA01KGS5 is a 0.22 µF film capacitor manufactured by Cornell Dubilier / Illinois Capacitor, rated for 800V DC with polypropylene metallized dielectric construction. This component is designed for motor run applications and features radial through-hole mounting. The part is classified as obsolete, necessitating identification of active equivalent and substitute components to maintain design continuity and ensure supply chain availability.

Substiute Parts

224MABA01KGS5

Cornell Dubilier / Illinois CapacitorIn Stock: 1168224MABA01KGS5 Datasheet

Current PartRFQ

R474N32205001K

KEMETIn Stock: 887R474N32205001K Datasheet

SimilarRFQ

R474N322050A1K

KEMETIn Stock: 1103R474N322050A1K Datasheet

SimilarRFQ

MABA013220KGL

NichiconIn Stock: 736MABA013220KGL Datasheet

Parametric EquivalentRFQ

MABA013220KGS

NichiconIn Stock: 1162MABA013220KGS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 224MABA01KGS5 is determined by the following critical parameters:

Parametric Equivalents (Direct Replacement): Parts that maintain identical or superior electrical specifications while preserving mechanical compatibility:

• Capacitance: 0.22 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating - DC: 800V (minimum requirement)
• Dielectric Material: Polypropylene (PP), Metallized (exact match required)
• Operating Temperature: -40°C ~ 100°C (minimum requirement)
• Lead Spacing: 0.886" (22.50mm) (exact match required for PCB compatibility)
• Mounting Type: Through Hole Radial (exact match required)

Functional Substitutes (Higher Voltage Rating): Parts that exceed the voltage specification while maintaining all other critical parameters, suitable for applications where voltage margin is beneficial:

• Capacitance: 0.22 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage Rating - DC: 1000V or higher (exceeds 800V requirement)
• Dielectric Material: Polypropylene (PP), Metallized (exact match required)
• Lead Spacing: 0.886" (22.50mm) (exact match required for PCB compatibility)
• Mounting Type: Through Hole Radial (exact match required)

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalent Selection (Direct Replacement):

MABA013220KGL and MABA013220KGS, both manufactured by Nichicon, are parametric equivalents of the 224MABA01KGS5. These components maintain identical electrical and mechanical specifications, including 0.22 µF capacitance, 800V DC rating, polypropylene metallized dielectric, and 0.886" lead spacing. Both parts are ROHS3 compliant and carry active product status, ensuring long-term supply availability. These parts are suitable for direct substitution in motor run applications without circuit modification.

Functional Substitute Selection (Enhanced Voltage Rating):

R474N32205001K and R474N322050A1K, manufactured by KEMET, are functional substitutes with elevated voltage ratings of 1000V DC. These components maintain the same capacitance, tolerance, dielectric material, and lead spacing as the original part. The higher voltage rating provides additional design margin. R474N322050A1K carries AEC-Q200 automotive qualification and X1 rating, while R474N32205001K carries X2 rating. Both are ROHS3 compliant with active product status. These parts are suitable for applications where enhanced voltage margin is required or beneficial.

Frequently Asked Questions (FAQ)

Q: Can MABA013220KGL or MABA013220KGS be used as direct replacements for 224MABA01KGS5?

A: Yes. Both Nichicon parts are parametric equivalents with identical capacitance (0.22 µF), tolerance (±10%), voltage rating (800V DC), dielectric material (polypropylene metallized), operating temperature range (-40°C ~ 100°C), and lead spacing (0.886" / 22.50mm). These parts are suitable for direct PCB substitution without design modification.

Q: What is the difference between the Nichicon parametric equivalents and the KEMET functional substitutes?

A: The Nichicon parts (MABA013220KGL and MABA013220KGS) match the original 224MABA01KGS5 specification exactly at 800V DC. The KEMET parts (R474N32205001K and R474N322050A1K) provide higher voltage ratings of 1000V DC, offering increased voltage margin. All parts maintain identical capacitance, tolerance, dielectric material, and lead spacing. The KEMET parts also feature extended operating temperature to 110°C.

Q: Are there physical size differences between these substitute parts?

A: The Nichicon parametric equivalents (MABA013220KGL and MABA013220KGS) maintain identical dimensions to the original part: 1.043" L x 0.394" W (26.50mm x 10.00mm) with maximum seated height of 0.728" (18.50mm). The KEMET functional substitutes have slightly larger width (0.433" / 11.00mm) and height (0.791" / 20.10mm) but maintain the same lead spacing (0.886" / 22.50mm), which is the critical PCB compatibility parameter.

Q: Which substitute part should be selected for motor run applications?

A: For motor run applications, the Nichicon parametric equivalents (MABA013220KGL or MABA013220KGS) are the primary recommendation, as they maintain identical specifications to the original 224MABA01KGS5. The KEMET functional substitutes are also suitable if the enhanced voltage rating and extended temperature range provide design benefits.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The 224MABA01KGS5 and all identified substitute parts (MABA013220KGL, MABA013220KGS, R474N32205001K, and R474N322050A1K) are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What is the lead spacing requirement for PCB compatibility?

A: All parts, including the original and all substitutes, maintain a lead spacing of 0.886" (22.50mm). This specification is critical for PCB hole pattern compatibility and must be verified during component selection.