2225GC153MAT1A Equivalent & Substitute Parts

Part Overview

The 2225GC153MAT1A is a 0.015 µF ceramic capacitor rated for 2000V (2kV) with X7R temperature coefficient, manufactured by KYOCERA AVX in the 2225 (5763 Metric) surface mount package. This component is designed for general-purpose high-voltage applications requiring stable capacitance across the operating temperature range of -55°C to 125°C. The part is currently active and ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance can be maintained or enhanced while preserving mechanical compatibility and application requirements.

Substiute Parts

2225GC153MAT1A

KYOCERA AVXIn Stock: 7572225GC153MAT1A Datasheet

Current PartRFQ

2225HC153KAT1A

KYOCERA AVXIn Stock: 52182225HC153KAT1A Datasheet

UpgradeRFQ

C2225C153KHRAC7800

KEMETIn Stock: 1678C2225C153KHRAC7800 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2225GC153MAT1A is determined by the following criteria:

Mandatory Compatibility Parameters:

• Capacitance value: 0.015 µF (exact match required)
• Package / Case: 2225 (5763 Metric) (exact match required)
• Mounting Type: Surface Mount, MLCC (exact match required)
• Temperature Coefficient: X7R (exact match required)
• Operating Temperature Range: -55°C to 125°C (minimum requirement)

Allowable Variations:

• Voltage Rating: Equal to or greater than 2000V
• Tolerance: Equal to or tighter than ±20%
• Manufacturer: Different manufacturers permitted if all mandatory parameters match
• RoHS / REACH Compliance: Must maintain or exceed current compliance level

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts provide enhanced electrical performance relative to the main part 2225GC153MAT1A:

2225HC153KAT1A (KYOCERA AVX): This substitute maintains identical physical dimensions and thickness while upgrading voltage rating from 2000V to 3000V and improving tolerance from ±20% to ±10%. Mechanical compatibility is complete with no dimensional variation. This part is suitable for direct replacement in applications where higher voltage margin or tighter capacitance tolerance is beneficial.

C2225C153KHRAC7800 (KEMET): This substitute provides the same voltage upgrade (3000V) and tolerance improvement (±10%) as the KYOCERA AVX alternative. Dimensional variation is minimal: length reduced by 0.005" (0.12mm), width increased by 0.002" (0.05mm), and thickness increased by 0.006" (0.16mm). These variations remain within typical PCB layout tolerances for 2225 package footprints. This part includes Low ESL characteristics and is suitable for applications where reduced equivalent series inductance is advantageous.

All three parts maintain ROHS3 compliance, MSL 1 rating, and active product status.

Frequently Asked Questions (FAQ)

Q: Can 2225HC153KAT1A or C2225C153KHRAC7800 be used as direct replacements for 2225GC153MAT1A?

A: Yes. Both substitute parts maintain the same capacitance value (0.015 µF), temperature coefficient (X7R), operating temperature range (-55°C to 125°C), and package classification (2225 / 5763 Metric). Physical dimensions are compatible with standard 2225 PCB footprints. The substitutes provide enhanced voltage rating (3000V vs. 2000V) and improved tolerance (±10% vs. ±20%).

Q: What is the difference between the two substitute parts?

A: Both provide identical electrical upgrades. The primary difference is manufacturer: 2225HC153KAT1A is KYOCERA AVX with exact dimensional match to the original part, while C2225C153KHRAC7800 is KEMET with minor dimensional variation (±0.006" thickness) and specified Low ESL characteristics.

Q: Are there any compatibility concerns with the dimensional differences in C2225C153KHRAC7800?

A: The dimensional variations (0.005" length reduction, 0.002" width increase, 0.006" thickness increase) are within standard manufacturing tolerances for 2225 package components and do not affect PCB footprint compatibility. Verify clearance for the increased thickness (2.70mm vs. 2.54mm) in height-constrained applications.

Q: Do all parts meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited moisture sensitivity) rating. ECCN and HTSUS classifications are identical across all parts.

Q: What inventory levels are available?

A: 2225GC153MAT1A: 652 pcs. 2225HC153KAT1A: 5200 pcs. C2225C153KHRAC7800: 1615 pcs.