KYOCERA AVX 2225CC103MATME Equivalent & Substitute Parts

Part Overview

The KYOCERA AVX 2225CC103MATME is a 10000 pF ceramic capacitor rated at 630V with X7R temperature coefficient, designed for surface mount applications in the 2225 (5763 Metric) package. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide alternative voltage ratings while maintaining identical capacitance, package dimensions, and core electrical characteristics for applications requiring higher voltage ratings or improved tolerance specifications.

Substiute Parts

2225CC103MATME

KYOCERA AVXIn Stock: 11172225CC103MATME Datasheet

Current PartRFQ

2225GC103KAT1A

KYOCERA AVXIn Stock: 46012225GC103KAT1A Datasheet

UpgradeRFQ

2225HC103KAT1A

KYOCERA AVXIn Stock: 1142802225HC103KAT1A Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2225CC103MATME are qualified based on the following criteria:

• Identical Capacitance: All substitutes maintain 10000 pF capacitance value
• Same Package Geometry: All substitutes use 2225 (5763 Metric) package with identical physical dimensions (5.72mm × 6.35mm × 2.54mm max thickness)
• Identical Temperature Coefficient: All substitutes maintain X7R temperature coefficient and -55°C to 125°C operating range
• Same Mounting Technology: All substitutes are Surface Mount MLCC components
• Compliance Alignment: All substitutes maintain ROHS3 compliance, MSL 1 rating, and REACH Unaffected status

The substitute parts differ in voltage rating and tolerance specification. The 2225GC103KAT1A provides 2000V (2kV) rating with ±10% tolerance, while the 2225HC103KAT1A provides 3000V (3kV) rating with ±10% tolerance. Both substitutes offer improved tolerance performance compared to the main part's ±20% specification.

Parameter Comparison

Engineering Selection Recommendations

Selection between the main part and substitute parts is determined by circuit voltage requirements:

• 2225CC103MATME (630V): Select for applications with maximum operating voltage of 630V or lower. Provides baseline voltage rating with ±20% tolerance.

• 2225GC103KAT1A (2000V/2kV): Select for applications requiring voltage ratings between 631V and 2000V. Offers improved ±10% tolerance specification and higher voltage margin.

• 2225HC103KAT1A (3000V/3kV): Select for applications requiring maximum voltage protection up to 3000V. Provides highest voltage rating with ±10% tolerance specification and maximum design margin.

All three parts maintain identical physical footprint, mounting compatibility, and thermal characteristics. Component selection is based solely on circuit voltage requirements and desired tolerance performance. All parts are Active status with full ROHS3 compliance and unlimited moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can 2225GC103KAT1A or 2225HC103KAT1A be used as direct replacements for 2225CC103MATME?

A: Yes, both substitute parts are direct replacements from a physical and functional standpoint. They share identical capacitance (10000 pF), package dimensions (2225/5763 Metric), temperature coefficient (X7R), and operating temperature range (-55°C to 125°C). Selection depends on circuit voltage requirements. Higher-rated parts provide additional voltage margin and improved tolerance.

Q: What is the difference between ±20% and ±10% tolerance?

A: Tolerance specifies the allowable deviation from the nominal capacitance value. The main part (2225CC103MATME) allows ±20% deviation, while substitute parts allow ±10% deviation. Applications requiring tighter capacitance control should select the ±10% tolerance parts.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts use the 2225 (5763 Metric) package with identical physical dimensions: 5.72mm length × 6.35mm width × 2.54mm maximum thickness. No PCB redesign is required when substituting between these parts.

Q: What does X7R temperature coefficient mean?

A: X7R indicates the capacitance change over temperature follows a specific curve, with maximum capacitance change of ±15% across the -55°C to 125°C operating range. All three parts maintain this same temperature stability characteristic.

Q: Are all parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant and REACH Unaffected, meeting environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is MSL 1 (Unlimited) moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All three parts share this same MSL 1 rating.