Amphenol RF 222124 F Type Straight Crimp Plug Equivalent & Substitute Parts

Part Overview

The Amphenol RF 222124 is an F Type Connector Plug with male pin configuration, designed for 75 Ohm coaxial cable applications. This component operates as a free hanging (in-line) crimp connector with threaded fastening, supporting cable groups including RG-59, 59B, 62, 140, 210, and Belden variants. The part is currently active in production with 988 pieces in new original stock inventory. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

222124

Amphenol RFIn Stock: 1009222124 Datasheet

Current PartRFQ

222119

Amphenol RFIn Stock: 1119222119 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol RF 222124 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: F Type
• Connector Type: Plug, Male Pin
• Contact Termination: Crimp
• Shield Termination: Crimp
• Impedance: 75 Ohms
• Mounting Type: Free Hanging (In-Line)
• Cable Group Compatibility: RG-59, 59B, 62, 140, 210, Belden 8241, 8263, 8279, 9209
• Fastening Type: Threaded
• Frequency Maximum: 2 GHz
• Number of Ports: 1

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Affected

The substitute part Amphenol RF 222119 meets all mandatory matching parameters and compliance requirements, establishing it as a parametric equivalent for direct substitution in applications requiring the 222124.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol RF 222124 and 222119 are active production parts with ROHS3 compliance and REACH affected status. Selection between these parts should be based on inventory availability and procurement lead times. The 222119 currently maintains higher inventory levels at 1012 pieces compared to 988 pieces for the 222124. Both parts are manufactured by Amphenol RF and carry identical electrical and mechanical specifications for F Type 75 Ohm crimp plug applications. Component selection for new designs or replacement applications can proceed with either part number without modification to circuit design or assembly procedures.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 222119 be used as a direct replacement for the 222124 in existing assemblies?

A: Yes. The 222119 is a parametric equivalent with identical connector style, impedance, termination method, cable compatibility, and frequency rating. Direct substitution is supported without design modification.

Q: What are the key differences between these two part numbers?

A: The parts are electrically and mechanically equivalent. The 222119 includes additional material specifications (Brass center contact with Gold plating, Polyoxymethylene dielectric) and includes component packaging details (3 pcs: 1 Connector, 1 Contact, 1 Ferrule). The 222119 also specifies MSL 1 (Unlimited) moisture sensitivity level.

Q: Are both parts suitable for RG-59 and RG-62 cable applications?

A: Yes. Both the 222124 and 222119 support the complete cable group including RG-59, 59B, 62, 140, 210, and Belden 8241, 8263, 8279, 9209 variants.

Q: What is the maximum operating frequency for these connectors?

A: Both parts are rated to 2 GHz maximum frequency.

Q: Do these parts meet environmental compliance requirements?

A: Yes. Both the 222124 and 222219 are ROHS3 compliant and REACH affected, meeting current environmental regulations for electronic components.

Q: What is the mating cycle rating for these connectors?

A: Both parts are rated for 500 mating cycles.

Q: Can these F Type crimp plugs be used for free hanging (in-line) applications?

A: Yes. Both parts are specifically designed for free hanging (in-line) mounting configurations with threaded fastening.