2220GC223MAT1A Ceramic Capacitor - Equivalent & Substitute Parts

Part Overview

The 2220GC223MAT1A is a 0.022 µF high-voltage ceramic capacitor manufactured by KYOCERA AVX, rated for 2000V (2kV) operation with X7R temperature coefficient characteristics. This surface-mount multilayer ceramic capacitor (MLCC) in 2220 (5750 Metric) package format is designed for general-purpose applications requiring stable capacitance across the -55°C to 125°C operating temperature range. The part is currently active in production with 869 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, design redundancy, and supply chain continuity.

Substiute Parts

2220GC223MAT1A

KYOCERA AVXIn Stock: 9662220GC223MAT1A Datasheet

Current PartRFQ

C2220C223KGRAC7800

KEMETIn Stock: 2743C2220C223KGRAC7800 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2220GC223MAT1A is determined by the following critical parameters:

• Capacitance Value: Must be 0.022 µF
• Voltage Rating: Must be 2000V (2kV) or higher
• Temperature Coefficient: Must be X7R for stable performance across the specified operating range
• Package Format: Must be 2220 (5750 Metric) to ensure mechanical and electrical compatibility with existing PCB layouts
• Mounting Type: Must be Surface Mount, MLCC
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The substitute part C2220C223KGRAC7800 (KEMET) meets all substitution criteria. Both parts share identical capacitance, voltage rating, temperature coefficient, package format, and compliance certifications. Differences in tolerance and physical thickness do not affect functional substitutability within the specified electrical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the 2220GC223MAT1A and C2220C223KGRAC7800 are active production parts with full ROHS3 compliance and MSL 1 rating, confirming their suitability for current design implementations. The KEMET substitute offers improved tolerance (±10% versus ±20%), which may provide tighter capacitance control in applications where precision is beneficial. The reduced thickness of the KEMET part (2.20mm versus 3.30mm) allows for lower-profile PCB assembly when space constraints are present. Both parts maintain identical electrical performance across the specified voltage, temperature, and frequency operating conditions. Selection between these parts should be based on procurement availability, cost considerations, and specific design requirements regarding tolerance and form factor.

Frequently Asked Questions (FAQ)

Q: Can the C2220C223KGRAC7800 be used as a direct replacement for the 2220GC223MAT1A?

A: Yes. Both parts share identical capacitance (0.022 µF), voltage rating (2000V), temperature coefficient (X7R), and 2220 package format. The mechanical and electrical compatibility is confirmed across all critical parameters.

Q: What is the significance of the tolerance difference (±20% versus ±10%)?

A: Tolerance defines the acceptable range of capacitance deviation from the nominal value. The KEMET part's ±10% tolerance provides a narrower capacitance range, which may be advantageous in precision-critical applications. The KYOCERA AVX part's ±20% tolerance is acceptable for general-purpose applications where wider capacitance variation is tolerable.

Q: Does the thickness difference affect PCB layout compatibility?

A: The KEMET part is thinner (2.20mm versus 3.30mm), which may allow for lower-profile assembly. However, both parts fit within the 2220 package specification and are mechanically compatible with standard PCB layouts designed for this package format. Verify clearance requirements for your specific application.

Q: Are both parts suitable for high-voltage applications?

A: Yes. Both parts are rated for 2000V (2kV) operation and are specifically designed for high-voltage applications. The X7R temperature coefficient ensures stable capacitance performance across the -55°C to 125°C operating range.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, confirming their suitability for standard manufacturing and storage conditions without special handling requirements.