2220CC223MAT1A Equivalent & Substitute Parts

Part Overview

The 2220CC223MAT1A is a 0.022 µF ceramic capacitor rated for 630V with X7R temperature coefficient, manufactured by KYOCERA AVX. This surface mount multilayer ceramic capacitor (MLCC) is designed for general purpose applications requiring high voltage performance. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Substiute Parts

2220CC223MAT1A

KYOCERA AVXIn Stock: 9442220CC223MAT1A Datasheet

Current PartRFQ

C2220C223JBGAC7800

KEMETIn Stock: 11621C2220C223JBGAC7800 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2220CC223MAT1A is determined by the following critical parameters:

• Capacitance Value: Must be 0.022 µF
• Voltage Rating: Must be 630V or higher
• Package / Case: Must be 2220 (5750 Metric)
• Mounting Type: Must be Surface Mount, MLCC
• Operating Temperature Range: Must support -55°C to 125°C
• RoHS Compliance: Must maintain ROHS3 Compliant status

The substitute part C2220C223JBGAC7800 (KEMET) meets all critical electrical and mechanical parameters. While the tolerance differs (±5% versus ±20%) and the temperature coefficient is C0G/NP0 instead of X7R, these represent improvements in performance characteristics. The physical dimensions remain compatible within the 2220 package specification.

Parameter Comparison

Engineering Selection Recommendations

Both the 2220CC223MAT1A and C2220C223JBGAC7800 are active production parts with full regulatory compliance. Selection between these parts should be based on:

2220CC223MAT1A (KYOCERA AVX): Select when X7R temperature coefficient characteristics are specifically required for the application. The ±20% tolerance is suitable for general purpose filtering and coupling applications where tighter tolerance is not critical.

C2220C223JBGAC7800 (KEMET): Select when improved tolerance performance (±5%) and C0G/NP0 temperature stability are advantageous. The lower maximum thickness (2.70mm versus 3.30mm) may provide benefits in space-constrained designs. Both parts maintain identical voltage rating, capacitance value, and package footprint.

Both parts carry ROHS3 compliance and unlimited moisture sensitivity rating, ensuring compatibility with standard surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can C2220C223JBGAC7800 be used as a direct replacement for 2220CC223MAT1A?

A: Yes. Both parts share identical capacitance (0.022 µF), voltage rating (630V), package (2220), and operating temperature range (-55°C to 125°C). The substitute offers tighter tolerance (±5% versus ±20%) and different temperature coefficient (C0G/NP0 versus X7R), which represent performance improvements for most applications.

Q: What is the difference between X7R and C0G/NP0 temperature coefficients?

A: X7R provides ±15% capacitance change over the operating temperature range. C0G/NP0 provides superior stability with minimal capacitance change across temperature. For applications requiring stable capacitance across temperature extremes, C0G/NP0 is preferred.

Q: Are the physical dimensions compatible on the PCB?

A: Yes. Both parts use the 2220 (5750 Metric) package with identical length (0.224" / 5.70mm) and width (0.197" / 5.00mm). The substitute has lower maximum thickness (0.106" / 2.70mm versus 0.130" / 3.30mm), which is beneficial for space-constrained applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. Both are suitable for standard surface mount assembly processes.

Q: What is the tolerance difference and does it matter?

A: The 2220CC223MAT1A has ±20% tolerance while C2220C223JBGAC7800 has ±5% tolerance. The tighter tolerance of the substitute provides more predictable capacitance values. For general purpose applications, either tolerance is acceptable. For precision filtering or timing circuits, the ±5% tolerance is preferred.